Thank you Sir - over here we have also a flickering LG TV - it is much bigger and it does flicker. Do you have a schematic for the power supply? (Often it is the power supply that makes things not workin right...) However - merry X-mas and a happy new year and again a big #Thank you# and may God bless you.

Sorry mate but your boring the nuts off me with explaination.

Pls sir I have problem with my ds708 I can select any car of my choice but I can read the fault I think I have software problem pls help me with the site that can help me out pls feed me back

Was probably never properly soldered from the factory. I'm surprised at Vtech to be honest, that was really janky inside, looked more like an AliExpress special than something from a respected company! Nice fix nonetheless 😀

I am not an engineer and appreciate your video as I have no idea about how to do what you are doing. If I might ask a stupid question why don't you check a whole row at a time since you have a power supply and can adjust the voltage ( to the number of leds in a row x3)? It would save the hassle of each one individually being tested. I have seen some videos where people have been using continuity meters of voltmeters to test these presumably as they give up 3v. I have noted that some led strips do not have test points and especially for those and peeling away the mask for each led seems painful.

My TV is not showing pictures but I can only hear the voices

Where are you located??

It'd be great to know where the internal battery is and if I can replace this myself?

Hi. Your video is very helpful. I will not be able to figure out just by myself how to open the camera without your instructions. Thank you very much.

Nice review great explanation throughout thank you 😊

Electronic- yo,amazing -🙌

I have a DCR-HC20 and the touch functions work, and the screen partially works, but the sensor that turns on and off the camera when you open the screen has been malfunctioning for years, but finally gave out in january.

Brilliant fix and also good old fashioned make what you can with what you have! Great modification technique 😊

I've got the same camera and the cassette mechanism stoped working. Does anybody know any private experts who can fix the mechanism or install a new one? I am based in London, UK. Or parhaps anybody knows forums where I can find an expert to fix this issue? Thanks. Previously I took ot to a video repair shop and they quote 570 GBP to repair which is insane as now this camera does not cost that much nowedays.

Hi how do we measure revolution of engine by degree in hantek software?

Very nice. We want to learn a lot from you about this type of stubborn Sharp TV, if possible

I have subscribed hope it helps

I just googled Lenovo Ideapad 320S-14IKB LA-E541P Motherboard and found one on ebay for £34.99 Lenovo ideapad 320S-14IKB (Type 80X4) Motherboard 5B20N78323 Pentium 4415U 4GB --------- There are others for £19.99, but you'd have to have a look to see if they're the same. Motherboard For Lenovo Ideapad 320S-14 80X4 Intel Pentium 4415U 5B20N78323 Try different domain searches - IE Google home page provides different results than Yahoo using MS Edge URL Address bar.

Nice try but with a short like that on the cpu/gpu it’s time to give up, Sorin from electronics repair school has come across that loads of times it’s very common, he’s ordered replacements and they have been used and bent so don’t buy a replacement it just won’t work unless you’re really lucky. Thanks for the upload 👍😊

You don't have much experience with computers if you don't know Intel S-Spec codes. SR342 = Core i5-7200U. Shorted PCH is quite common fault.

After watching and following your video, I found out my problem is with the same ribbon. Part of its literally cut, so I guess that’s why the LCD wasn’t functioning. I’m going to order a new one and hopefully it works out! Thank you!!

I have this board but for a smaller TV and the output connector for the leds is smaller with red and black wire where i get 121V beetwen them, but for my calculations it should be 135V because of the numbers of leds, 9 leds at 3V in 5 strips do 135V... When i turn on the backlight it lights just a lil bit, i think its OVP kicking in but i can't measure the current. My leds are good they light all but just a lil bit, it's new strips

Shame they’re changing things to make it harder, I love your work sir, I think it’s to get rid of the small fish

Sorry to hear. They are a monopoly so they do as they please

There are many ass-hats that work at KZbin. They use every trick in the book to avoid paying out earnings.

Do I have to turn water off in hot press??

Where i buy this instrument send me instrument name thank you

Top guy brilliant video,thank you for your knowledge, time...

Good work really useful,fixed many of them over the years...

Turned out my problem with this TV set was an old power strip. Put a new one and problem solved.

Brilliant work thanks 😊

If you have the time & they have the money 😀

STK5481, una avería común, ese mismo reproductor se vendió también bajo la marca Thomson.

Almost the same. Staerted changing the output capacitors (470uFx10V and 2200uFx10V) that were bulged and measuring way lower the nominal value. Had +5V, but -5V giving like -2V). After replacing the caps, nothing. 0V on both outputs. Changed the capacitor on the side of the board and the PSU is working now, Used a 100uFx25V, I hadn't any 47uF caps on my bin.

hi, how to get link for download tool ?

hi thanks for the great video the best i came across. I'm wondering if you can help me i put the same shower up for my sister today so i was doing the decommissioning on it. I open the filter assembly taugh that was to bleed out the water, That was grand so i powered it up and the water only get hot for a second then goes cold.i have put a few showers up for family over the years with no problem. instead of opening the small bleed screw i open the filter assembly and it wan like a pressure of air came out. i really need your help im from ireland two. my belly in a knot i cant sleep thinking about it. And i have to go up in the morning to try to fix this. please can you put me in the right direction i feel so stupid. Its the same showed your working on in the video HELP

You are a genius. Thank you! Repaired successfully mine with minor experience in electronics. Just replaced this STR-W6765.

Thanks for the knowledge and the fix. Sir please can u share a link to the schematics of the board?

щщщщ

Здравствуйте! Вышел из строя выносной аккумулятор. Камера больше 5 лет не работала. Купил новый аккумулятор , камера включается и просит установить дату. На дисплее это сделать не получается, не реагирует. Как я понял вышел из строя аккумулятор в самой камере! Подскажите как до него добраться и где он находится?

Please Send it to me If you don't need it thanks YOU brother z main tv samsung ps43d450

This was a very educational video. Thank you.

ls this still a decent scanner or is it outdated? I'm just a weekend warrior.

What glasses are you using and could you recomend them please.

Liked watching the proces but from 23:35 on you put 3 screws into the same whole. Strange.😀👍

Hello, please help me. I updated to maxidas ds708 version 6.33 after restarting the device. The car update does not start and the connection to the server is not available.

hello please help me, I updated v6.33 after I restarted the device. the car update does not start and the connection to the server is not available.

dove si trova la batteria Tampone di questa cam?

Let's hope some 10 year old kid doesn't zap themselves on a ballast probing it with a screw driver.

Great video,very informative