Thank you so helpful

Young man, the legnth makes no difference at all. 2 feet or 20 feet. The SWR is determined by the antenna, not the coax length. In every 18 feet (at CB freqs) you get a voltage peak and a current null, It may show up on a simple SWR meter, but has nothing to do with actual SWR of the antenna. You just cannot modify true SWR by adding or cutting coax. AE4YW

Interesting video and its a definitely a vintage radio i want to get one day. 73 kq4hcu

hello

Fox hunt... Squeeler box.

UPDATE... i wish you best luck my mom has RA and LUPISE ,,, so I under stand what your going through best wishes ... Love your video content..

HOPE YOU ARE DOING GOOD BRO HEALTH WISE..... FROM CANADA ....

Good videos on this canopy... Hey I'm wondering... can you have two legs fully extended and the opposite two legs extended but different heights than the other two... or two not extended at all ? Meaning can you set it up to have a slanted roof in order to have better sun protection or even to shed rain off the top in one direction ? I appreciate your time making these videos and your time spent in responding, thanks n' God bless

I just got one from Walmart and was struggling to put it up by myself, your video helped a lot, excellent. I suppose the first setup is time consuming, now I know how it goes up it will be a lot easier next time. I see other videos showing it being folded down with the canopy still attached, I'm not sure if that is a good idea or not? it might get ripped?

Por que andas armados brother

Great! what is the size of the display ? Thanks

Hey thanks I just got mine today and no videos show as much detail as yours and as a single mom this was very helpful so thank you so much! I’m beach ready for Mother’s Day now 😊

Thank you so much for this! We are about to have a terrible storm and my husband is busy working and not able to take it down so this helped me and I was able to pack it up and put it in the house!!

You need to turn that gain up it's not up high enough.

Any chance you can post the instructions? I moved and now gotta reassemble blind :)

Yes it’s been a very long while, glad to see you back brother.

So you assembled and then started recording?

Even with watching this video I still broke the damn thing lol 😅

I ordered 2 of these from China. I heard they only rx on am, so I asked the supplier about that, and I was told it could be programed to tx on am. I haven't had a chance to mess with them yet other than power up check. If you figure out how to program it to TX on am, please share. Thanks

Ebay has a quad band antenna for the th9800. The hh9000 it's around $35

this is the only video I have been able to find with this radio. Thank you. And its awesome youre not a sad ham. I was wondering if you could help me setup my 2720 im trying to get on a repeater and Im just not getting it. I did the mars mod on it so I can get on UHF 4**.*** but im not sure im doing the TONE correctly. any help is appreciated.

I just pulled my older version out of a friend's shed. I bought it in 2014 and used it once for a last minute trip and Its in great shape. I plan on using it tomorrow. Its a darker material along with some different designs with the door and rain fly.

For programming using Chirp did you use a specific TYT cable or you can just use any standard usb-A/mini-USB cable ? Thanks a lot

Mine has 195,000 Runs good

Looks like fun

Buy cheap bike and you get what you pay for. These department store bikes are so low quality, they are throw away garbage. Spend the money on a real bike from a real bike shop brand like Trek, Specialized, Giant, etc. They are expensive, but worth the investment, and they last, and can actually be serviced for years to come.

You're out to lunch

The rambling man

That mic should have something Turner called a "Switch kit" installed. It's a third leaf switch installed in the mic that switches off the receive and kills that feedback and what sounds like talkback. The only way to get one nowadays is if the mic had one installed back when they were being sold new (1970's and maybe early 80's). If you download the turner wiring book any of the radios listed with "requires Sw.K" in the wiring guide for that radio your out of luck. I just looked in my book and in the Cobra section the newest radios listed are 138xlr and 139xlr and all of the cobras are 4 pin mic plugs but all of them require the "switch kit" installed so I would think you would need it for all the 5 pin radios ie. 2000. When Turner brought out the +3B (the black +3) it came with the switch preinstalled and the Relay electronic switch removed. You will either have to find another +3 with 3 switches in it or just get the +3B. Your mic is still good for many radios but not ones that rely on the receive to be switched by the mic. Sorry this was rather longwinded. Good luck.

All this trimming of coax by one inch increments gets you a accurately measured ½λ of coax and getting Rs to 1 and Xs to 3. It sounds great! I assume you have an SWR meter? And then a jumper coax to the radio? All this careful trimming and then you add a jumper coax and the SWR meter so throwing all this accurate measuring off as the two coax cables are connected together and don't forget the SWR meter of about another 4 inches. Do you think the SWR meter somehow magically isolates the aerial coax from the radio coax? Does the SWR meter add on to the jumper coax or the aerial coax? Jumper coax obviously but why is that not a ½λ if it is important on the aerial side? It's nonsense! G4GHB.

Initially I thought being on low would be 30 watt scale not 300 but looking this meter up on Amazon I was wrong low is 300 and high is 3000. I was actually going to buy this meter and forgot the scaling. Anyway one thing I wanted to say is maybe given such a high scale on low that when the carrier is turn way down it might not be super accurate. I think to get an accurate carrier turned all the way down it would be better to have a 10 20 or 30 watt scale. I think it would give a more precise number on the low end. As far as swing goes, at least the radios I have when the rf power is turned down the swing also comes down quite a bit. I typically see modded radios maintaining full swing regardless of carrier. I personally prefer it to be fully adjustable so you're not limited on amps, certainly low drive amps couldn't take 50+ watts worth of drive. Adjustability can also be radio specific, I don't have heavily modded radios but some seem to be different going from AM to sideband. For example I have a qt40 that's adjustable both ways but then I have a quad 5 that's only adjustable on sideband swing not AM swing just the carrier changes

Daniel nicely reviewed I ended up buying these

Muchas gracias

Hopefully you know by now that meter needs a 9 V battery to run the peak circuit. That’s the only reason I bought this meter from MFJ because Dozy and all the other average meters don’t have the circuit you can’t have peak power readings without circuit without power

Do you have to get your dead key down to to watch, it doesn’t matter what it swings to I got the same issue with my Quad five

I have a tent that ripped i used gorilla black duct, tape, weather resistant. I put it on the outside and on the inside it holds better than your original seams

Friend, you’re too young for Cataracs, and as far as power supply, I got a beautiful 50 amp dual meter lot a little extras. If you’re interested comment back, I picked it up for $149 from Amazon, and stop with the sugar foods you’re gonna end up diabetic then you’re gonna really have trouble with your eyes my friend

Yes!!!! Omg this saved my life today!!! I live in Florida and we were pummeled with some severe rain and wind all week long. Needless to say, the entire top was ripped to shreds and my son and I couldn’t get that tent down for the life of us until I stumbled across this video. It folded like butter afterwards. Thanks for this helpful demonstration 🙌🏾🙌🏾🙌🏾🙌🏾❤❤❤❤

Hi Dan: You did an excellent job at producing this very detailed set up video. I really liked the close up camera shots at the end. Thank you so much for spending your personal time in recording and posting this video. You could add your credits at the end, especially for that 4-legged supervisor. God bless you sir for caring and loving that very special little critter. I also love dogs very much. I am saving your video in my playlist of Ozark Trail products.

your gun is pointless, try not to hurt yourself. Fear will have you be your own undoing, it is the paranoid fox-news deathcult of stupidity, now with T R E A SON and Russia loving.

When soldiering the coax plug on try not to use too much or it'll 'draw up' inside and short etc.

Looks very accurate to me 👍 You’re method is more than sufficient. We’re not splitting the atom here , as some would criticize you to death .

It works better if you turn them upside down, and less likely to collapse.

RED Flag on the Flag.

Thank you for this excellent video. It showed me that I missed pressing the red release buttons at the tops of the legs when I tried to collapse the frame. FYI, eight stakes come with the tent. I saw the demonstrator in another video pound one through the hole that you noted at the end of each leg and use the other four to stretch stretch and anchor those ropes fastened to the legs' tops diagonally away from tent for further stability.

Maybe you should start a podcast similar to what I have talked about in the series (for the newbies)? As I type this out I am forgetting what I had in mind, what is the purpose of two way radio? Do some driving vlogs that shows us you just driving down the road? IDK!

Helpful video , thank you what’s up with the hun on your waist ?

if you haven't fixed it yet. Change out D528 to a NTE136A it's a zener diode. Should fix your problem.

Omgggg thank you so much, I couldn't fold this tent to save my life and found your vid🙌🙌🙌🙌🙌

I just watched your video. It was a big help. Show your help on people a year after you posted a video appreciate it.