I may get the game now that there are mods like this!
@ArifFidaali3 күн бұрын
@@threesixtysafari2115 Great!
@ArifFidaali2 күн бұрын
Great!
@rishabhthakur811222 күн бұрын
bro that is not caked.. that is Phase change pad it is solid in room temp and liquid above 45 celcius.. u fkd up!!! i did not need changing. it is supposed to be spreaded after being heated in pressure to form very small layer of contact filling gaps.. not stay in pad form..
@rishabhthakur811222 күн бұрын
do some research first!!!!
@harrydijkstra993616 күн бұрын
Done many 100's of PTM applications as a repair store and have authentic 400X160mm sheets, yes it starts as a pad and above 45c it becomes soft and the excess material pushes away leaving a thin layer when fully cured. Genuine PTM blows away every thermal paste.
@lostboyninja896324 күн бұрын
Are you on a laptop or tablet?
@ArifFidaali24 күн бұрын
Hi of course, on a laptop how can it be a tablet?
@g33k_Tech7 күн бұрын
@@ArifFidaali 🤣🤣🤣🤣🤣🤣
@reuben_lumor26 күн бұрын
Thanks for making this video bro, I have the same rig and I was wondering if I can play this
@ArifFidaali26 күн бұрын
@@reuben_lumor Yes with the same specs you can
@opedrorey28 күн бұрын
greatt video!
@ArifFidaali28 күн бұрын
@@opedrorey thanks
@tkfire4999Ай бұрын
where did you buy upsiren
@ArifFidaaliАй бұрын
@@tkfire4999 from AliExpress
@ArifFidaaliАй бұрын
Check out my new video on PTM 7950 & Upsiren U6 pro kzbin.info/www/bejne/a4ndd5h3bZaekJY The state of PTM after over 1 year is surprising 😮
@ArifFidaaliАй бұрын
Thanks! 😊
@FireScorpion254Ай бұрын
hmm nice setup. and good vid keep em coming
@ArifFidaaliАй бұрын
Thanks, will do!
@haikalsaputra5273Ай бұрын
Hello can i ask, what application to show the fps?
@ArifFidaaliАй бұрын
@@haikalsaputra5273 MSI afterburner
@k4192 ай бұрын
i bought something similar to ptm 7950 a thermal pad similar to it can i use it as thermal paste like you did on your video my laptop with 3060 and i5 11400h heats a lot even i limit it at throttlestop so do you think i should i do it
@ArifFidaali2 ай бұрын
@@k419 Is your pad phase changing like PTM 7950? There are very few pads that can phase change like PTM
@k4192 ай бұрын
it changes like ptm too i think
@ArifFidaali2 ай бұрын
@@k419 Ok then maybe you try and see how it goes. What is the pad you're using?
@k4192 ай бұрын
@@ArifFidaali its called pullsar ice dragon doesnt exist in amazon i think i found it on turkish site specs are 20w/mk conductvitiy 2.00 mm
@k419Ай бұрын
nvm i just got a thermal paste refunded pad ordered 1mm thick for vrams
@EnderhuskYT2 ай бұрын
bro i got intel i5 gtx 1660ti and 16 ram but i am only getting 30 35 fps with these setting how are you getting over 110 fps ???
@ArifFidaali2 ай бұрын
There could be a couple of reasons: 1. Is the game set to play on the GTX1660Ti or iGPU? 2. Have you turned frame gen on in game? 3. Are you playing on battery or the wall charger plugged in?
@EnderhuskYT2 ай бұрын
@@ArifFidaali yes the game is on GTX 1660ti the I turn frame gen on and yes my battery is plugged
@ArifFidaali2 ай бұрын
@@EnderhuskYT Are the Nvidia drivers upto date?
@ArifFidaali2 ай бұрын
I have also undervolted the CPU that might help, check description for the video
@EnderhuskYT2 ай бұрын
@@ArifFidaaliI will try and come back
@Gian27542 ай бұрын
I have the same graphics card with 16 ram, but it gives me strong jerks at times and I have everything in the middle with fsr and frame generation and I don't know what solution to have.
@ArifFidaali2 ай бұрын
It is most likely due to your laptop thermal throttling. Check my videos on CPU & GPU undervolting and either repasting or applying PTM7950 (links in the description). Also check your fans, if they're dirty then you need to clean them.
@Gian27542 ай бұрын
I think my PC needs cleaning hahaha, even so this only happens to me with wukong, because with other games that are almost as heavy I do normally without jerks :(
@cikponti48792 ай бұрын
great video. anyway, is this game difficulty like Sekiro or Elden Ring?
@ArifFidaali2 ай бұрын
@@cikponti4879 yeah the games difficulty is high especially the boss fights. Sekiro is a bit more difficult.
@baggeerus2 ай бұрын
This game will run on medium settings with: Intel Core i7-10750H, NVIDIA GeForce GTX 1660 Ti (Laptop), 15.6”, Full HD (1920 x 1080), 144 Hz, IPS, 1000GB SSD, 32GB DDR4 ? In 2020, I bought an ASUS ROG STRIX G15 G512LU laptop. Will the game run on it now?
@ArifFidaali2 ай бұрын
Ofcourse it will why not?
@rch90802 ай бұрын
Laptop Name?
@ArifFidaali2 ай бұрын
Acer Predator Helios 300
@xaviedie2 ай бұрын
J'ai la même configuration. Pourrais je obtenir autant de framerate ?
@ArifFidaali2 ай бұрын
Yes you could get the same frame rate if it doesn't thermal throttle. You can see my other videos on how to reduce high temps like application of PTM 7950 or undervolting
@shinslaher2 ай бұрын
Nice i got the same gpu paired with Ryzen 4800h 16gb ram 1.5tb ssd and im planning to get this game thanks bro!
@ArifFidaali2 ай бұрын
@@shinslaher Nice! 👍
@shinslaher2 ай бұрын
By the way did you mod this frame generation thing? Ive read a reddit post about it.. Thanks!
@ArifFidaali2 ай бұрын
@@shinslaher No this is not a mod, frame gen is there by default in game thanks to AMD
@shinslaher2 ай бұрын
@@ArifFidaali ohh thanks😊😊
@Dragonage647742 ай бұрын
Do you happen to have the Legion 5 1660ti variant?
@shinslaher2 ай бұрын
Whats the fps if you raise the super resolution a bit higher 70 to 100? At med to high settings thanks! 😊
@ArifFidaali2 ай бұрын
Check my latest video where I look at graphics settings: kzbin.info/www/bejne/iobLgId8p5anmtE
@ashishsharma-hl3xi2 ай бұрын
bro how you have extended your ram? i confused which one to buy coz I don't know which one came inbuilt,so I can't pair it with the same one. my model- ph315-52-77ya help
@ArifFidaali2 ай бұрын
Hi to know your RAM compatibility first download CPU-Z to know your RAM. You can check this link for 100% compatible RAM: www.crucial.com/compatible-upgrade-for/acer/predator-ph315-52 You will need to install dual channel RAM for max performance which means you will have to swap out the existing RAM with the new kit of say 16GBx2.
@Smart_boy20012 ай бұрын
Hey bro. Your CPU temps are quite good considering youre fps are above 150fps! My question is: is it the same laptop that you applied PTM on it?
@ArifFidaali2 ай бұрын
@@Smart_boy2001 Hey, yes it's the same laptop with PTM.
@anassbansaa2552 ай бұрын
i have the same config but i installed it on hdd does it lower performance or something ?
@ArifFidaali2 ай бұрын
@@anassbansaa255 It will affect loading times and yes overall performance. The good thing is SSDs are so cheap now.
@exoahm2 ай бұрын
Bro ye folding ha?
@ArifFidaali2 ай бұрын
@@exoahm nahin ye folding nahin he
@animeguy10152 ай бұрын
Did you buy the game?!?
@ArifFidaali2 ай бұрын
Yes I did lolss from Epic Games
@FireScorpion2542 ай бұрын
i also have 1660ti on pc. great GPu and nice footage. 80fps ave is good.
@ArifFidaali2 ай бұрын
Thats great. Yeah the 1660ti still going strong. Now with frame generation we can get good fps even for older cards.
@luqman10722 ай бұрын
Bro beli saiz apa?
@ArifFidaali2 ай бұрын
Size: 50mm x 31mm
@clive04942 ай бұрын
How do i know if its original? And whats the use of smaller green square?
@ArifFidaali2 ай бұрын
The vendor provided is used by a lot of youtubers but if you're still unsure you can buy from the KZbinr Linus on his LTT store where his is straight from Honeywell. The green squares are to help you guide or place the PTM but I didn't find them useful.
@clive04942 ай бұрын
@@ArifFidaali thanks so much im tired of changing paste every 6months.
@vishudhmohan21353 ай бұрын
Same specs here, but how much fps will get in mereiden open-world areas??
@ArifFidaali3 ай бұрын
I'm getting between 80 - 90 fps in medium settings
@shadow_musix3 ай бұрын
Can i apply Honeywell on the vram chips as well?
@ArifFidaali3 ай бұрын
@@shadow_musix Yes you can. It's just that people put thermal putty instead
@shadow_musix3 ай бұрын
I see. I was thinking of putting thermal grizzly kryonaut on these vram chips if i happen to run out of pads. Will that be okay too?
@ArifFidaali3 ай бұрын
@@shadow_musix Yes it will be fine
@shadow_musix3 ай бұрын
@@ArifFidaali Thank you!
@clive04942 ай бұрын
Whats a vram chips? Cuz i only replace thermal paste on cpu and gpu for 3years in my laptop.
@ibrahimmohamed51243 ай бұрын
what is the game version
@ArifFidaali3 ай бұрын
Current version is V1.5.80.0
@jacobusstefanuspotgieter13324 ай бұрын
What do you use to measure the temperatures?
@ArifFidaali4 ай бұрын
MSI afterburner
@PikiNovv4 ай бұрын
Dx 11 or Dx 12?
@ArifFidaali4 ай бұрын
DX12 as you can see from the stats on the top right
@Strenthentheinnerman4 ай бұрын
Does it have touch screen
@ArifFidaali4 ай бұрын
It doesn't have a touch screen
@NotBorno4 ай бұрын
helios 300 had bad thermals from the beginning. that's why newer predator models come with side vents as well. used it on my hp omen 16 and during full fan it can easily maintain 80-85 C at 100+ watts of cpu power draw during stress test. previously it throttled after reaching 97 C when i ran the stress test everytime it drew that much power. it can utilize a good cooling system on a laptop. smaller laptops or the ones with only two outward fan vents will see less of a difference as they are bottleneckes by the inherent vapor chamber like in your case. i compared it with arctic mx 4 newly pasted btw. it easily reached those temperatures and got worse over time due to pump out. ptm 7950 not only works better but will be not prone to pump out in laptops like normal thermal paste so we won't need to replace it from time to time for a very long time
@ArifFidaali4 ай бұрын
Yes good thing about PTM9750 replacement won't be necessary unlike thermal pastes.
@NotBorno4 ай бұрын
my laptop cpu temps never go above 80 C after applying this. i have an omen 16 2024
@ArifFidaali4 ай бұрын
Great
@Sunny-Gupta14 ай бұрын
from where did you buy?
@ArifFidaali4 ай бұрын
@@Sunny-Gupta1 Link for where to buy is in the description
@xeontron9645 ай бұрын
Can you safely mix noctua thermal paste h1 and h2 ?
@ArifFidaali5 ай бұрын
Yes you can there won't be issues
@xeontron9644 ай бұрын
Thanks sir
@Gamer-huzi5765 ай бұрын
From where i can order? Is it availability in Pakistan?
@ArifFidaali5 ай бұрын
Where to buy PTM7950: www.moddiy.com/products/Honeywell-PTM7950-SP-Super-Highly-Thermally-Conductive-PCM-Pad.html I don't know about Pakistan, but the above site is where I bought from. They deliver worldwide. They delivered to here in Nairobi, Kenya.
@michalinag50325 ай бұрын
where is the microphone in this Laptop?
@c0r5e7 ай бұрын
the mx4 is bad for laptops. They last a month max
@aboringguyistaken7 ай бұрын
Hey I have the exact same laptop and am getting lower FPS then you(around 60 for Medium). Can you tell me if you downloaded/installed any extra drivers from outside Websites or only used the ones from Official Website? I think I am getting Lower FPS because of outdated drivers.
@ArifFidaali7 ай бұрын
I'm just using the latest drivers from Geforce experience. My CPU is undervolted.
@patorikusutaru74837 ай бұрын
i use bios to undervolt my cpu, but it's always crash when playing this game
@ArifFidaali7 ай бұрын
Its most likely too far of an undervolt. Try playing around with it until its stable.
@khafvaal44157 ай бұрын
same here but as you reach the acceptable values it becomes useless as you wont notice the reduced watt or heat,never had any problem with any game but when rtx enabled this game go nuts with undervolt.i have 4070 btw
@patorikusutaru74837 ай бұрын
@@ArifFidaali it's not even stable at -100mv so i stop tweaking for this game
@ArifFidaali7 ай бұрын
@@patorikusutaru7483 If you have an Intel CPU try using Throttlestop instead of the BIOS undervolt
@patorikusutaru74837 ай бұрын
im gonna try disabling e core, i think that might what cause instability in this game(while applying undervolt), since the game utilize all my p core and e core
@fallentrash16737 ай бұрын
Is this thermal pad a great alternative to honeywell? Its too expensive to import it here and the only reseller is only restocking it in 2 months 😢
@ArifFidaali7 ай бұрын
GP extreme and PTM 7950 are totally different materials. The PTM is phase changing and the GP are thermal pads suitable for VRAM chips. On the CPU temps will be high with the GP. It's then better you use paste like Arctic MX 4 which is readily available. Check the link in the description with moddiy they deliver worldwide, I got mine in my post office box.
@HelloWorld692067 ай бұрын
Please could you answer me a question, when PTM is below 45 degrees in solid state it will maintain a similar temperature to the thermal paste you were using before? One person told me on reddit that below 45 degrees the temperatures increased rapidly but other people said the opposite that they remained almost the same as the thermal paste and it caused me confusion, if you could share your experience I would be very grateful. Excuse me if I express myself incorrectly, English is not my main language and I use Google translator.
@ArifFidaali7 ай бұрын
Yes at below 45 degrees the PTM will have similar temps as thermal paste in my experience with my Predator Helios laptop I get similar temps like when I apply Arctic MX 4. I also play around with clock speeds using Throttlestop to further reduce temps. Check out my video on Throttlestop in the description.
@Devarahman5 ай бұрын
Same with me, but my application to my laptop takes a very long time and so hard because is so thin. I also applied it to the GPU and there was a slight tear (will it affect the GPU which is not exposed to my laptop's thermal or not) which caused it to not be completely flat. But overall, I use it for low daily gaming with mid end gaming being good too. No doubt and no problem with it, my GPU temp reaches a stable 68-80 when gaming and when idle it reaches the 41-46 range and for the CPU 64 when playing and 46 when idle. I applied it 1 week ago, maybe if there are significant results (really lowering the temperature) I will let you know here later
@Devarahman5 ай бұрын
And yeah, I also undervolt my cpu and overclock gpu to reaching excellent gaming. My spec laptop is Intel Core I3-5005U with AMD R5 M430 GPU
@GoBeavs1093 ай бұрын
@@Devarahmanexcellent gaming on that thing? 😅
@Devarahman3 ай бұрын
@@GoBeavs109 I mean to achieve sufficient performance for this device, nothing more
@potbot8878 ай бұрын
I have the exact same laptop but with i5, only getting 45 FPS. How much of a difference is with over/under-clocking ?
@ArifFidaali8 ай бұрын
As you can see from the video I'm getting over 80 fps on medium setting.
@potbot8878 ай бұрын
@@ArifFidaali I enabled DLSS getting 60+ now too. Thanks
@ryze-xyz8 ай бұрын
Thanks for the review! Do you undervolt your CPU & GPU ? if yes, can you drop the settings? I have the same specs as yours, but I have some issues with overheating
@ArifFidaali8 ай бұрын
Yes I undervolt both my CPU and GPU. I use Throttlestop to undervolt - CPU cache and CPU core is at -147.5 mV. For the GPU I use MSI afterburner with a frequency graph of 1950Mhz.
@ryze-xyz8 ай бұрын
@@ArifFidaaliThanks I'll try for the CPU. But CMIIW, for your GPU, I think the frequency of a 1660ti laptop is around 1445 base and 1590 boosted. Does that mean you're OC the GPU?
@ArifFidaali8 ай бұрын
In the frequency graph it reaches 1950Mhz but in game it rarely reaches that frequency, more like 1400 - 1700 Mhz. Also the CPU is capped to 3.4 Ghz but is capable of turbo boosting to 4.5 Ghz. This is to keep temps as low as possible without compromising performance too much.
@ENGAM8 ай бұрын
MX4 is stable for 95% of applications but not the greatest, PTM7950 vs Noctua NTH2 yeah doubt that the difference is going to be noticeable... Gonna check this soon since i got both and will try to replace NTH2 with PTM later. On a Legion5 pro 12700h rtx3070...
@ArifFidaali8 ай бұрын
Great let us know your findings.
@devanshanil24684 ай бұрын
so what did u found
@sawtmatar8 ай бұрын
you should say to click on the right mouse key to select a profile