DaHoodie

Пікірлер

@aaroninks 3 күн бұрын

So it used nearly 75 miles worth of fuel, the truck did nothing useful. How in TF does the government think this is saving the planet?

@dahoodieguy 3 күн бұрын

Tell me about it. They are saying we are causing the climate change with our trucks while they are flying all over the world in their private jets. Pretty realistic.

@JeffreyDopp 12 күн бұрын

Bro, shakey camera, too dark no narration. Looks like a cool boat but…

@dahoodieguy 12 күн бұрын

Thanks for the input. I took this back in like 2010 with my GoPro hero 4. Before the advent of all the steady cam stuff we have these days. But rest assured if I start looking for a new boat the video quality will be a lot better.

@blvdstar5010 23 күн бұрын

I have a 2019 Lariat 350 that doesn’t have the auto regen function. Can anyone tell me what do❓

@dahoodieguy 23 күн бұрын

OCR is something that you need to enable yourself. You do it with an OBD2 reader and a free software called Forscan. There are several videos here on KZbin that will explain the exact process of how it's done. Good luck and know that is is well worth the time to figure it out. There are a lot of things that you can do to your truck with the software.

@RR_Aedan Ай бұрын

hey bro do u think this monitor is worth it? i have a 27 inch 165hz 1080p curved msi monitor rn and i need something new. does it have good color customization and things like that?

@dahoodieguy Ай бұрын

It seems pretty good to me. I'm not an expert in displays or anything but I've been liking it. The price was good and it looks good to me. I haven't really changed the color settings on it. I set it to DisplayHDR when I got it and pretty much haven't seen the need to change it since then. Would I recommend it, based on what I've seen so far, yes I would.

@Silent-Gameplays209 Ай бұрын

graphics 🔥 gameplay mid.

@dahoodieguy Ай бұрын

This was just a test run through Lorville with my GTX 1080. The ones with my 7900GRE look a lot better I think. Thanks for the comment!!

@EchosBeast Ай бұрын

looks good my guy :)

@dahoodieguy Ай бұрын

Other than my video card struggling.. My 7900 gre should be here tomorrow and I'll run it again to compare the differences.

@EchosBeast Ай бұрын

@@dahoodieguy cool cool :)

@vincer8691 Ай бұрын

When I put the Banks 5 inch cat back on. The OCR only takes 18 minutes. The 82 percent increase of flow helps for power and regen.

@dahoodieguy Ай бұрын

Very nice. My truck is still 100% stock (except for onboard air and airbags) so far. Maybe at some point I might do some mods to it like that. Thanks for the info and comment!!

@Raider113ci Ай бұрын

My 2022 Lariat, I have OCR enabled on it and love it. My 2024 however won’t allow OCR to be enabled but it also is a better active system. At least when it does regen, it only fills the filter to 50% which takes about 8 miles to cook off. Also if in regen and power is shut off, it resumes the current regen cycle on next power up. My 2022 would not resume, it would just start refilling the filter until 100% full.

@dahoodieguy Ай бұрын

Nice. I haven’t dealt with anything other than my 2017 so I don’t know anything about how they work. It’s good that they have updated the systems some. And the way it won’t resume on a restart like that is why I try to do them as static when I can. Like to make sure it’s always fully cleaned when it needs it. Thanks for the comment!!

@votpavel Ай бұрын

👍

@dahoodieguy Ай бұрын

That is a sweet ship for sure.. Thanks for the comment! ;)

@votpavel Ай бұрын

@@dahoodieguydamn i want it, i cant decide if i need it or not, my plan is to fly polaris full time and i also wanted to get eclipse for polaris hangar.Its a shame prowler is probably too big, otherwise i would jam it in polaris and use that as a secondary,i freaking love the spotlights on prowler as well and its like icing on a cake for me(i always like good landing lights or spotlights)

@dahoodieguy Ай бұрын

Personally, I love the landing lights on the Drake Corsair myself. It is very nice to be able to actually see where you're about to touch down at. Good luck on your decisions!!

@votpavel Ай бұрын

@@dahoodieguy @dahoodieguy i just found some video with corsair on ground at night and yes it is very nice flood lighting around the area of the ship landing gears.Something like this gets overlooked and ignored, but if we get more that xian system where one planet day cycle lasts 100+ years then you can imagine that you will always go to some locations and they will always be in the dark side so solid landing lights=spotting threats and landing=very useful

@dahoodieguy Ай бұрын

Yeah for sure. When I first started playing SC, it was a major issue for me. Alway so dark and I couldn't see anything. Finally they tweaked the lights a bit and made it better. The Corsair has a nice rear ramp light too. Helps a lot when looting on those ERT missions. hehe..

@wreckinball4426 Ай бұрын

Hey I switched to manual regen W/ active Regen inhibit. It’s not showing on the instrument panel with the percentage. Do I have to switch something else to get It on the instrument panel? I have a 2019 F250.

@dahoodieguy Ай бұрын

Yes, There is two parts to it.. Sounds like you got the second one done. The first one is to add the percentage screen to the display. That is where you actually start the manual regen process from. Don't know where you are getting your settings from but on my sheet there is one called "Add DPF Filter % to screen" which is under IPC 720-07-02 and another for "Enable Auto-Regen Checkbox" which is on the plain english side.

@dahoodieguy Ай бұрын

Here is now I see it on my sheet. Don't know how this is going to come through but here it is... Add DPF Filter % to screen IPC 720-07-02 x7xx xxxx xFxx xxxx This adds the DPF % screen to the Truck Information screen. Some trucks will report a camera error after making this modification. To avoid this, update according to the following: If original default value is 0, change to 8; if 1, change to 9; if 2 then A; if 3 then B; if 4 then C; if 5 then D; if 6 then E, if 7 then F.

@wreckinball4426 Ай бұрын

Okay! Thank you very much!!

@wreckinball4426 Ай бұрын

I’m using FORScan and OBSLinkEx too.

@wreckinball4426 Ай бұрын

@@dahoodieguy thank you again!

@JohnBraman413 2 ай бұрын

no new sailing videos? still got it?

@dahoodieguy 2 ай бұрын

Hey John, Nope, I sold her in like 2016/17'ish. Was fun while it lasted. The current owner is still sailing her though ( @sailingfrogsleap ) so she's still out there doing her thing. Thanks for the comment!

@johnnywalker5635 2 ай бұрын

I don't have ANY of those dash select options in my 2019 6.7L

@dahoodieguy 2 ай бұрын

Hey, It is something that you will need have enabled at a Ford dealer, or get an OBD2 reader (like I showed in the video) and Forscan software to enable the settings yourself. A quick KZbin search will show the exact process for DIY. Thanks for the comment.

@johnnywalker5635 2 ай бұрын

I have a Foxwell and Blue Driver scan tools. Sounds like that won't work?

@dahoodieguy 2 ай бұрын

@@johnnywalker5635 I honestly have no idea.. The OBD2 device is like 50 bucks off Amazon and Forscan is a free software though.

@omarlo721 3 ай бұрын

My truck doesnt gave this option. F250

@dahoodieguy 3 ай бұрын

It's something that you have to turn on with an OBD2 reader and the Forscan software. It will not be there by default.

@jasonschaeffer72 4 ай бұрын

I got a 17 f350 6.7 King Ranch dually and I can't find anything about DPF or regen in my menu

@dahoodieguy 4 ай бұрын

Hey, it is something that has to be enabled after the fact. It is not turned on by default. If you search on KZbin for something like "enabling Ford OCR" you should find the method for enabling it. You need an OBD2 reader like I showed in my video as well as a copy of Forscan (which you can download for free at forscan.org) on a windows laptop. You could also try a Ford dealer service center and see if they will enable it for you as well. They may or may not do it for you. But it's actually a pretty straight forward process once you understand how it all works. Hope this helps some and thanks for the comment. Good luck.

@jasonschaeffer72 4 ай бұрын

Thanks for the information. I'm still learning how the new stuff works. Lol. I'm still debating whether to to learn the new systems or just delete altogether. I've heard a lot about 4scan but kinda leary about going that deep into the computer (some things you can't UNDO)lmao 😂 I'll try the Dealer route first

@dahoodieguy 4 ай бұрын

@@jasonschaeffer72 Yeah, I'm thought about deleting mine too but decided against it. Hopefully the dealer will be able to hook you up. Make sure to tell them that you want the "inhibit" feature turned on so you can stop a regen from starting when you don't want it to. Good luck!!

@wesleygeorge3882 4 ай бұрын

Nice mounting job. thanks for showing your setup up close and detailed.

@dahoodieguy 4 ай бұрын

Glad you found some use from it. Thanks for the comment!

@philo5096 5 ай бұрын

The friggin camera is making me seasick, come on dude control it please. Nice boat though.

@dahoodieguy 4 ай бұрын

Yeah, I know.. This was recorded a long time ago before the stabilizers where so readily available. I was just holding my GoPro Hero 2 with my hands.

@user-bl1pg1bq4u 6 ай бұрын

lets go brandon

@dahoodieguy 6 ай бұрын

More like, "Go home Brandon"!! ;)

@Nemo71340 6 ай бұрын

Hes just smug, people thought trump was arrogant but this guy is the typical DC smug guy who takes you to dinner and promises you everything and then never talks to you again.

@dahoodieguy 6 ай бұрын

But but.. 81 million votes!

@charleskeegan7098 6 ай бұрын

And he is still wasting our money

@dahoodieguy 6 ай бұрын

Hopefully his reign is coming to an end soon.

@suconalocklear4568 7 ай бұрын

Hey man, got a question. I have a 2019 f250 platinum 6.7. The rpm’s will shoot up to 1k when its warming up or when idling while in park, and I can here the turbo spooling, I’ll tap the gas and it goes back to normal. I don’t have the manual filter clean option, was curious what you or anyone thought this might be coming from?

@dahoodieguy 7 ай бұрын

Heyhey, I do believe that is from a Ford recall that has been done to your truck. Which was a PCM flash that changed something with the SCR. I'm not 100% sure but I think it was Ford EMISSION Recall 20E07. Have you had any recalls taken care of on your truck in the past? And the manual regen stuff doesn't come turned on by default. It's something that you have to turn on or get a Ford dealer to do for you if they will. Hope that helps and thanks for the question.

@dahoodieguy 7 ай бұрын

Thought I'd post you an update. I was reading some posts on the FB Super Duty forms this morning and happened to run across a good explanation for what you are seeing with the idle up. Figured I'd post it for you. "The exhaust aftertreatment does not work properly when cold. The DOC cannot convert HC and the SCR cannot convert NOx. These constituents accumulate in the exhaust or slip through and cause pollution. The elevated idle will result in a proper working aftertreatment and burn off of accumulated constituents." Hopes this helps explain better why it's doing that.

@MistAtsiM 5 ай бұрын

So anotherwords it's normal operation? I have same thing it happened a few times

@dahoodieguy 5 ай бұрын

I would be considered normal if your truck has had the recall done to it I do believe. I have not let them flash my truck as of yet so I do not experience this myself.

@eagerweevil6221 4 ай бұрын

@dahoodieguy my truck has the recall code your talking about I was just curious how long should I let it do that for

@user-my6sh1sb7i 7 ай бұрын

Hey man, thanks for the video. I’m considering to buy a 6.7 power stroke, but I don’t drive on highway daily. If you had to guess, what percentage of your miles has to be highway miles in order to keep the system “clean”? Thanks!

@dahoodieguy 7 ай бұрын

Normally it will take about 20 to 30 mile nonstop to get the DPF fully cleaned. I don't drive on the interstates too much myself these days which is why I enabled the OCR stuff. With it enabled (like I show in the video) you don't really need to drive it to clean it. Just pull off some where safe and manually run it when it's full. Works like a champ. Let me know if you have other questions and I'll do my best to help if I can. Thanks for the question and comment!! Good luck!

@georgemcpherson102 7 ай бұрын

Hi I am looking for the scan tool you used. I have a 2014 F250 6.7. To day

@dahoodieguy 7 ай бұрын

Hello, the OBDII connector is called "OBDLink EX" and you can grab it for about 60 bucks on Amazon. The software side you can download from forscan.org. You can get a 3 month license from them for free. You will need a windows install to use their software. Hope this helps. Good luck.

@georgemcpherson102 7 ай бұрын

@@dahoodieguy T hank you for the heads up on the parts. So after Ford did the regeneration they have advised me I need a new cat. At the cost of $6700. Plus $1200 Installed now I am looking for a new cat.

@dahoodieguy 7 ай бұрын

@@georgemcpherson102 I don't know exactly what is involved with all of that, but I see catalytic converters online for 500'ish bucks or so. Might be worth a second opinion from another dealer or diesel shop before you drop close to 10k. Just my thoughts. Good luck!

@rn2cro03 7 ай бұрын

Who knew?

@dahoodieguy 7 ай бұрын

Hopefully it helped. Thanks for the comment.

@sergiogallardojr3390 8 ай бұрын

How about a 2011-2016 f350 how you do it ??

@dahoodieguy 8 ай бұрын

Honestly, I have no idea. Don't own that year model of truck. I'm sure there are some videos out there on it though. Thanks for the comment!

@dahoodieguy 9 ай бұрын

If you would like to use this short for anything, please feel free. Thanks for watching!

@paulmadruga9786 9 ай бұрын

Quit jumping around with that phone so much.

@dahoodieguy 9 ай бұрын

Thanks for the comment.. I'll keep that in mind. That was recorded on a GoPro Hero 3 back in like 2010 or so.

@dahoodieguy 9 ай бұрын

If you would like to use this short for anything, please feel free. Thanks for watching!

@CaughtonDashCamm 9 ай бұрын

Hello! Can I feature this video for an edit that I'm working on? I'll fully credit you of course.

@dahoodieguy 9 ай бұрын

Absolutely. Enjoy and thanks!

@mrcopsus 9 ай бұрын

Hey! May I use your video in compilation? Full credited of course

@dahoodieguy 9 ай бұрын

Yes. Feel free. Thanks!

@PERFECTLS3 9 ай бұрын

What do I think? Okay, well you asked for it. "The wreck was not bad enough for me to stop so I kept going as well". - Well Bob, we got reports that you sideswiped a car in your rig and kept going. They filed a police report and hired an attorney. There were two of them in the car with the same story, so I'm sorry but we're going to have to let you go. No no, I believe you, but with two witnesses, both with back pain and medical bills, I don't have a choice. Too bad someone else wasn't around or a camera didn't pick it up. Good luck in the future Bob, I'm sure this will be off your CDL driving record in no time at all. Until then, maybe Swift or Amazon Prime will hire you. It isn't like 20,000 YRC drivers are all looking for work right now... You are selfish, and could have cost this driver his job because you were too lazy or self absorbed to stop and help. That's what I think.

@dahoodieguy 9 ай бұрын

I can appreciate your point of view and thanks for the comment. Only thing I can say is hopefully Bob invested in a dashcam being that all Bob does is drive up and down the roads with a bunch of krazies all the time. Good luck Bob, me and my truck load of kids hope it worked out okay for you.

@bluelineeye 10 ай бұрын

Hey! We're creating a new video and your clip would fit perfectly. Can we use it? We'll give you full credit, of course.

@dahoodieguy 10 ай бұрын

No problems. Enjoy and thanks!!

@Sergey322 10 ай бұрын

Hello there! May I use this clip in my compilation? Thanks.

@dahoodieguy 10 ай бұрын

Go right ahead. No problems. Thanks!!

@wisewayss 10 ай бұрын

Hello! We're creating a new episode and would love to feature your clip. Can we use it? We'll make sure to credit you in the description and add a watermark to the video.

@dahoodieguy 10 ай бұрын

You are more than welcome! Enjoy and thanks!!

@Mrwinningfun 10 ай бұрын

Hi, can i use your, dashcam viideos, wiith credit .?.

@dahoodieguy 10 ай бұрын

No problems at all you are welcome to use it! Thanks!!

@Mrwinningfun 10 ай бұрын

@@dahoodieguy Thank you

@DashcamLessons 10 ай бұрын

Hi, can I feature it? Credited of course! And what happened after the accident?

@dahoodieguy 10 ай бұрын

Hello!, Yes, feel free to use the video. And I'm not sure what exactly happened afterwards. Looked to me like the car got off on the exit ramp and kept going. The truck pulled over. The wreck was not bad enough for me to stop so I kept going as well. Thanks for the comment!

@DashcamLessons 10 ай бұрын

Thank you!@@dahoodieguy

@RRBDDrivingSchool 10 ай бұрын

Hi Thomas Weaver,i can I use this video "DUI Hit Run" in my compilation of dashcam clips?with credit (name on screen).Any comment?where did it happen??

@dahoodieguy 10 ай бұрын

Hey, I don't mind if you use it. This happened south of Atlanta just past the airport. Enjoy and thanks for the comments!

@RRBDDrivingSchool 10 ай бұрын

Thank you@@dahoodieguy

@danieljones8173 11 ай бұрын

Will that REGEN ,take that bird shit off the fender ???

@dahoodieguy 11 ай бұрын

If that fender gets close enough to the exhaust it will.. hehe.. Thanks for the comment!

@BrewCityRider 11 ай бұрын

That's some crazy stuff right there! Just got myself a 2019 6.7L and have been reading up on this DPF business. Coming from a 7.3L I didn't know anything about this system. I believe the manual says that driver input is not necessary and that the regens are automatic...is that not the case? So 4 days after buying the truck I get a damn CEL with a DTC of P2002, which as you know is the DPF system. Guess I'm off to the dealer...just glad I'm still under warranty!

@dahoodieguy 11 ай бұрын

Congrats on the new 6.7. Great engines. The regens are automatic if you drive a lot on the interstate. They need non-stop travel for it fully clean the DPF. If you stop the truck the regen ends and it doesn't get to fully clean the filter. At the very least you should turn on the DPF percentage so you know the level of "fullness" that it is currently at. I setup OCR on my truck because there is sometimes that I'm only doing short drives and it is nice to be able to do a manual DPF clean. Knowing that the filter is back to zero percent when its done. Keeps those P2002's from surprising you. Warranty or not, truck still has to go to the shop which means downtime for you. The OBD2 reader is like 30 bucks, Forscan is free, and that is 100% worth the piece of mind that my truck is going to be doing what it should be when I need it to rather than it being laid up at the dealer getting fixed.. ;) Thanks for comments and good luck!

@eddp5056 11 ай бұрын

I was told this was only available in the lower trim levels that idles a lot.

@dahoodieguy 11 ай бұрын

That should not be the case.. Pretty much any 2017+ Ford Super Duty with the 6.7 diesel in it can do this. You have to use Forscan to enable everything or a dealer may (or may not) do it for you. But other than that, they all should support it. Thanks for the comment.

@frerichs191 11 ай бұрын

I just performed this OCR in my driveway. After it was complete and the engine idled down. I tried taking it for a drive and upon take off and braking to a stop the engine acted as if it were going to cut out and die but it would always stay alive. Drives fine but idles at 500rpm. What’s wrong?

@dahoodieguy 11 ай бұрын

Hey, I've never had that issue before with mine. After the DPF clean completes, I will always drive it around a little bit to help things cool off some as it gets pretty hot during the cleaning process. Did it fully clean the DPF back down to zero percent in the read out? And other than the low idle does everything else seem like it's working as it should be? I'm not really sure what the issue could be as I am not a diesel mechanic. I just know how mine behaves and I've never had any issues what so ever. A little bit of white smoke when it starts which goes away pretty quick, it does its thing and I drive off like normal. What model/miles and year is your truck? Has it thrown any codes or anything? Do you notice anything out of place like high engine oil temps or anything? Was that the first time you've done one of the static cleans like that? I would suggest that you post about it on one of the Super Duty forums on Facebook to see if anyone else has had this type of issue. I'd be interested in knowing what (if anything) you find out. Good luck.

@stickbogart3657 Жыл бұрын

❤ I noticed that your steel braided wire is too close to the exhaust that can create a leak when the steel braided coating gets real hot. It will cause a leak. Trust me, I have experience that it was my fault that I did not properly route the steel braided hose that goes from my toolbox to my air horns in my air pressure gauge in the cab of my truck. Keep your steel braided hose away from the exhaust. The hose will last much longer. ❤❤

@dahoodieguy Жыл бұрын

Thanks for the tip.. I've had it under there like it for over two years now and everything has been fine so far. Hopefully it will stay like that! I will keep an eye on it though.

@stickbogart3657 Жыл бұрын

You would love to see pictures of my operation in my truck. I’m very proud of what I built for my truck and it keeps the stupid people from getting too close. The air horns are extremely loud and they wake up the dead that are stupid on the freeway.

@stickbogart3657 Жыл бұрын

I like your system it’s very detailed. It’s a clean application, but I would never put my air compressors in an area that could get filthy, dirty and get water splashed all over them everything that I put together, including. 4 VIAIR air compressors are in the toolbox in my pick up truck, so they never get in the weather. I don’t want them to be splashed with water or any kind of mud and filth. I have a 80 amp fuse that activates all 4 VIAIR air compressors at the same time but I do have a switch where I can activate just two of them if I do not use that switch all 4 four of them come to life with the flick of one switch if I want rapid air recovery for my airhorns. I think everybody should stay away from the copper coated aluminum wire. Copper coated. Aluminum wire is not safe for high amperage. Be careful when you buy off of Amazon. Make sure it’s solid copper that is not coated with aluminum.

@dahoodieguy Жыл бұрын

Yeah, I went through thinking about it under the truck like that. Being I don't have a tool box in the back of my truck I just decided to put them under the truck. The air compressors are 100% sealed except the air intake part, which is not really a problem as I wouldn't have them on while I'm off road or driving anyways. So far, after almost three years of them being under there, they are surprisingly clean. I think they are high enough under there and the transfer case gives them good blocking from most of the grime. Only real issue I've had is with the pressure switch in the manifold being straight up and down allows moisture to get down into the switch and rust it out. I've had to replace it twice already.. Thanks for the comments!

@stickbogart3657 Жыл бұрын

❤. I bought two starter solenoid’s for my air compressor system using the. 4 VIAIR air compressors for my system. I have four gauge wire copper wire, not aluminum coated copper wire that goes from my battery inside of the pick up truck toolbox that’s in my bed. People need to talk about the copper wire. That’s coated with aluminum. It’s not good for the system. If you’re pulling high amperage like I am. People need to be careful as to what they purchase off of Amazon. Some of it is real cheap junk. Cherry pick the wire that you purchase. I have an 80 amp fuse, about 8 inches away from the positive terminal on my battery. The 4 gauge wire goes all the way down the frame of my truck open to the Tool Box that’s in the bed of my pick up truck to activate. 4 VIAIR air compressors. I do have six of these compressors, but there’s not enough room in the toolbox for. 6 air compressor, so I was only able to put 4 of them in the toolbox with a 2 1/2 gallon air tank. The system that I put together is very detailed. It’s very reliable and I did hit the bypass/boost switch to bypass the pressure switch and ran it all the way up to 250 psi and none of the hoses steel braided hoses I might add did not come apart, but I do have a pressure switch that shut everything off at 170 psi I put the system together just for super loud Hadley air horns in the grill of my truck where you cannot see it, but it will wake the dead if I need to wake somebody up before they hit my truck. It’s a shame that we cannot post pictures when we post comments or videos on KZbin because my system is completely highly detailed ❤❤

@dahoodieguy Жыл бұрын

Nice.. And yes, I've dealt with the wire issues before. It does take some digging to get a good piece of wire off amazon. You never know what that stuff is going to be when you finally receive it. My first setup I did have the wire from the battery to the first fuse there disintegrate basically. I replaced it with a better wire as well as some heat shrinking and it's been good ever since thankfully.

@stickbogart3657 Жыл бұрын

❤❤❤ hi mounted my 4 Viair air compressors in the toolbox in the bed of my pick up truck for my airhorns. I did not want them underneath of the vehicle because they’re going to be exposed to a lot of bad weather, water, and dirt. I’ve pumped my system all the way up to 250 psi it all of my fittings did not blow apart but I sent them with pressure switches that go up to 170 psi and then all for compressors get turned off. I put the system together just for air horns to keep people awake when they’re driving down the road and they might for some reason not be paying attention. I don’t want him to crash into my new truck so I can give them a check up from the neck up as they start weaving into my lane. I’ve got a 2 1/2 gallon air tank and the system is unbelievable when I show it to anybody they are totally blown away. ❤❤❤

@dahoodieguy Жыл бұрын

Sounds like a nice setup. The air compressors are sealed up pretty good except for the filter part that takes in air. Mine are high enough up under the truck that they stay pretty clean all the time. As long as I'm not out mud bogging or anything they should be fine. I've wanted to get some air horns for my truck too but have not as of yet. I mainly use mine for airing up tires and blowing things out to clean the dust out. Maybe one day I'll throw on the horns. I think it would be pretty nice. I've seen setups where the normal horn works until you flip an upfitter switch then the air horn will work instead of the normal one. Would be pretty nice. Thanks for the comment!

@donschaus1951 Жыл бұрын

This is the dumbest thing ever!! All for emissions which make zero difference in the big scheme of things

@kpatterson7009 Жыл бұрын

I’ve been looking for this boat for a while.. why did you end up going with the Island Packet?

@dahoodieguy Жыл бұрын

Honestly the Island Packet checked all the boxes. They are well built boats that are still in production to this very day. It had everything in it that I was looking for. I wish it was a bit bigger but at my price point at the time it worked just fine. The Pacific Seacraft was a close second I will admit. If I was going to do it over again, I'd go for some type of catamaran these days. Thanks for the question.

@kpatterson7009 Жыл бұрын

@@dahoodieguy Thank you. I assume you say that because 27 ft feels really small?

@dahoodieguy Жыл бұрын

Correct. It's not that it "feels" really small, it's that it IS really small.. hehe. I lived on that thing for over two years. At first it was fine but after a while, the walls start to close in on you so to say. Small can be a good thing with respects to prices of slips, haulouts, and such but I just wanted more space after a while. No real way to get away from anyone else on the boat with you, which is why I said I'd go with a catamaran if I was to do it again.