Gavin Danitz

Пікірлер

@tvrunn Күн бұрын

I want to get a 10th gen Si as a daily. All I plan to do is basic mods like intake, exhaust, wheels tires and suspension. I only have a couple questions, is it safe to run a base Ktuner tune with just an intake and exhaust (maybe intercooler?). Also what's the biggest wheel and tire combo you can run on springs? I want to keep the electronic dampening if I can but if it means sacrificing the looks with a smaller wheel and tire combo, I'll go with coilovers

@kingdomcoomies518 6 күн бұрын

I have a built Si 2018 coupe and have seen a FK8 type r swapped 10th gen Si which Apprently uses same ECU so it’s an easy swap but the accord engine seems more budget friendly will keep this in mind if I ever blow up the 1.5 on track

@kingdomcoomies518 11 күн бұрын

Nice build! I have a coupe Si its almost done being built for track I didn’t swap but it has a built short block ppg trans doing suspension w fortune auto 500s and breaks genny swap we’ll see how she dose out there!

@kevinAuman1 12 күн бұрын

The guy in the bright pink shirt was he really pissing on that tree?

@kevinAuman1 12 күн бұрын

You should not disgrace the fallen heroes by associating this song to a fucking car, grow up boy! I watched my own brothers fall in iraq 2003!

@MichaelMontalvo-if4wv 12 күн бұрын

Congratulations brother🎉

@JamesAnderson-fw5ew 12 күн бұрын

Where did you order those axles?

@SirUncleCid 16 күн бұрын

I love when people just plainly say "k tuner is better" without any support. What exactly is better?

@eddievalino8074 18 күн бұрын

hey, you mentioned you were tracking your car with the oem headstuds? how long did they last before your head gasket cratered?

@gavindanitz 18 күн бұрын

Had a few autocross events and maybe one track day. Blown at just 40k miles

@jambo_jackbelly 20 күн бұрын

Sounded like a pissed off weenier dog 🐶

@JamesAnderson-fw5ew 20 күн бұрын

If you ever need an o2 again, its like 150 and its an ntk part. Im pretty sure you can order it from oreillys

@JamesAnderson-fw5ew 20 күн бұрын

I really like your build! I like how you also have the sedan and think it looks better than the coupe. My 1.5t is making 350whp on e30 but its been rather unreliable so Im doing a k20a2 swap. I prefer the 8400 rpms😎

@celestialeel 10 күн бұрын

coupe looks better, sedan looks like dads car

@JamesAnderson-fw5ew 10 күн бұрын

@ the sedan is actually practical and doesnt have that ugly bar light in the back

@jp-hs9hl 28 күн бұрын

Goofy ahh haters I got my products from the homie AKD Built.

@fyodorplaysRoblox Ай бұрын

A human in the car😂

@bthesupersaiyan Ай бұрын

I’m glad I got an FK8 instead of an Si and do all that

@B8v3 Ай бұрын

Would this fit a 19 civic sport touring hatch?

@carcalde86 Ай бұрын

Funny how I've been thinking about doing this lol

@justtuna4401 Ай бұрын

I have a 96 accord coupe and I've been looking into swapping a c4 into it. This is interesting and it provides further detail, different car but ideas are there. Thank u

@ShaiyanHossain Ай бұрын

1st mod for any fwd should be a stiffer rear swaybar

@user-ef7wk6gb4k Ай бұрын

Beautiful car guys!!

@Vivianauxito Ай бұрын

Another solid video, Sir. We released a portable air pump. Can we invite you to do a review? We've emailed for an inquiry

@prestonrivara7266 Ай бұрын

Sounds great!!!

@mattl1925 Ай бұрын

I have a red 24 sport hatch. I’m rebuilding it after an accident and decided it would be sick with a rwd swap with a ST engine and SR20 transmission. My stock 2.0 (8k miles old) and transmission has almost paid for everything

@kingdomcoomies518 6 күн бұрын

Bro what? That would be so much money and also hella random just build a Si or R

@Rays_89 2 ай бұрын

You should turn on HEAT at full blast when it passes 205. Also, run an hybrid racing low temp thermostat and adjust the radiator fan to kick on at 175f in Ktuner.

@TheyCallMeBrooklyn 2 ай бұрын

Only question that is bugging me is did the Vette driver ever have a conversation with you after your last lap? Personally it look like he couldn't pass and was doing his best to keep up.

@jeffwaterman4144 2 ай бұрын

Great video, dude!

@BlueCivid 2 ай бұрын

Honestly I’ve been dreaming of a type r for a while but realistically my income isn’t at the type r money yet. Looking into a 10th gen si coupe for the time being and I think I enjoy my moms crv so I know it’s a little quicker and more fun with the 6 speed. I daily a 98 hatch with stock d16+4 speed auto so it’s definitely an upgrade and an awesome daily. Maybe I’ll buy my dream at a later date.

@NiclasHorn 2 ай бұрын

damn, this car i older than these two poor kids who dont understand what a LEGEND of a car they have there, 635 CSI, super hard to get your hands on as second hand, cuz not many where sold new in Sweden and many of the owner never sold the.

@YandyCastillo-s1w 2 ай бұрын

Le sirve al honda civic lx 2020

@YandyCastillo-s1w 2 ай бұрын

Precio

@AlexHernandez-oy3ym 2 ай бұрын

That’s pretty good! Paid $15k for an SI so another $12k is a total of $27k! Not bad for having a 2 “type R” haha

@chasecorbin9339 2 ай бұрын

Jesus dude upgrade the exhaust😂

@scootersmed8263 2 ай бұрын

what will i do if i got seat warmers

@scootersmed8263 2 ай бұрын

for wiring connectors

@1to1tuning 2 ай бұрын

We (as a business) TRIED to give AKD a chance to build our driveline components for a few race cars that we built. It ended up being a very similar situation to yours Sadly, even as a business, we got treated the exact same way. I heard about his past interactions and was even warned by numerous people that had been burned by Stephen to stay away. After speaking with Stephen, he really seemed like a genuine guy that got a bad rap and I gave him a chance. At first, I ordered 2 sets of AWD Civic swap axles and driveshafts. He actually did send me the parts at one point, but I had to send them back due to quality and fitment issues we discovered even before installing them to our cars. Once I saw some of the parts actually being made (issues or not), I ordered even more since our builds at the shop increased exponentially. After this… the runarounds started. I heard the same stories about manufacturing and “Rocky” (whom I believe to be Stephen disguised as a “manufacturer”). Was told 2 weeks that turned to months…Everyone was to blame except Stephen. After going back and forth for a few months, I knew my window to do a chargeback was shortening. The parts I did get looked to be just intentionally sent to shut me up. He banks on people by selling them these nice driveline parts and giving completion dates that put him past the chargeback window. After that, you are the bad guy for wanting your parts or money and there is nothing you can do. Its wild, that after all these years, the guy is still in business. I sent his parts back, and had to file a chargeback with my credit card for nearly 12k collectively from multiple orders placed. After that, I got called every name in the book via email, lots of racist stuff too which was weird. I was blocked on all social media. He even tried to argue the chargeback with the banks (which he lost). The saddest part about ALL of this is… the guy is actually SUPER intelligent and has the means to do good business. Some people, however, are just not cut out to be in business. This is where the lines get blurred in my opinion. Just because you CAN do something (like design parts and have China build them) doesn't make you a good business person. Lastly, if you ever need any help with the K20C platform or any other parts, tuning, etc. shoot me a message on our site’s contact page and I would be happy to help. I have an extensive knowledge on the platform and offer a lot of parts and services. www.1to1tuning.co

@Young_Bobby34 2 ай бұрын

Tbh this engine the si should have came with from the factory.

@PeterVwj 2 ай бұрын

when mine blows ill swapp hehe

@TheChef11111 3 ай бұрын

Looks garbage!!!

@wildlatino89 3 ай бұрын

Let's put it this way, I get so upset when many trash talk l15. They are very similarities to the d series and zc twin cam, this is the new future of a redesign zc twin cam with a turbo. Those 3 d, l15, zc are all the same l15 is shit oil pump unless you go thicker oil and oil cooler makes a better difference and that adds 5 qt. 5 qt extra lube has made a big difference, oil changes at 3500 to 5k. I say the block has the same piston size as a d series and zc. The crank hold good power and has decent oil passages. The piston walls are thick, same size, it all lands in the hands that put money and build it right. Cos? Naw 500 to 600 is great especially done right, don't cheap out. Oil pump upgrade, keep oil squirter and choose thicker oils. I can keep on forever but build or maintain even if you did a arp head stud to upgrade for future head gasket failure.

@bavariansharks7149 3 ай бұрын

👍👍👍👍👍

@JaleelFrancis-m6k 3 ай бұрын

This is unrelated but maybe you might be able to help, I have a 2020 civic Si and all the warning lights popped up. Iv been back to the dealer 3 times and they keep returning...HELP!