What is the 4Runner upgrade on the brakes? I'll have to look into that. Take his advice, oil, air filter, trans fluid, and other maintenance parts are cheap but repairs from neglect can be expensive. One way to ensure your trans fluid is at the proper level kzbin.info/www/bejne/m4PbhKhqYpmioNE Something to watch for if you drive on salted roads kzbin.info/www/bejne/iZS5eq2VpJxmac0
@the_stable55348 күн бұрын
@@onenikkione the break upgrade was from a 2013 or 2014 4Runner. I believe the pistons in the calipers are better along with the rotor. I also did 2 videos about it about 10 months ago. Yeah, he’s definitely right, I was slackin lol
@tomjacka740120 күн бұрын
the cover on my pro-m was cracked all the way around so i dont even know if it will work i super glued it.
@the_stable553420 күн бұрын
@@tomjacka7401 oh wow, hopefully that will work for ya. A new computer is going to be pretty pricey
@tomjacka740120 күн бұрын
nice car i got a 1992 been sitting for 7 years. just started working on her again
@the_stable553420 күн бұрын
@@tomjacka7401 oh sweet! This one has been sitting about that long
@TeeTopJedi21 күн бұрын
The fuel in the intake could be sign of bad fuel regulator getting sucked in from vacuum line
@the_stable553421 күн бұрын
@@TeeTopJedi Exactly what it was!
@2001sleeper23 күн бұрын
Zeitronix is the way to go. I only watched part 3 and part 4. But are you sure your injector data is correct?
@the_stable553423 күн бұрын
@@2001sleeper this is our first time not running a factory ECU, I believe I plugged it in right but I could be wrong. Seems like everyone in the Pro M facebook group made the switch to Zeitronix
@smoothtee305320 күн бұрын
I have the factory ECU and never had a problem.... When you start switching them out ,that's when you start having issues.. but hope y'all got it straighten out
@the_stable553420 күн бұрын
@@smoothtee3053 very true, but once you start modifying things, the older technology starts to show its limitations. Hope to have it up and tuned within the next two weeks!
@2001sleeper23 күн бұрын
What was the CEL? Pretty knowledgeable folks on the Pro-M section of the Corral forums. What are the drivability issues?
@the_stable553423 күн бұрын
@@2001sleeper it had to do with the wide bands. However the car was still breaking up and felt lazy down low. John, the guy that’s going to tune the car, I believe was pretty active on the corral. I believe we’re in good hands now🙌🏾
@GainzB4Gamez28 күн бұрын
You ever figure out the lights??
@the_stable553427 күн бұрын
@@GainzB4Gamez Not the low beams. I run the DRLs most of the team. When I fully turn the brights in, the Hi beams come one. With the light bar, and the brights I have plenty of light if I need it. I don’t believe it’ll get better than that
@boostedboss650129 күн бұрын
Glad to see another boss channel! Twin turbo boss checking in!
@the_stable553429 күн бұрын
@@boostedboss6501 Hell yeah! You’re car looks great, love the Twins!
@JamesWilliams-dj2bp29 күн бұрын
Who is the manufacturer of the vent gauge?
@the_stable553429 күн бұрын
@@JamesWilliams-dj2bp P3
@Marine2111usmcАй бұрын
What psi are you running in the rears?.
@the_stable5534Ай бұрын
@@Marine2111usmc That was 16-17 psi in the rear tires
@Marine2111usmcАй бұрын
That gotta have it green car moves out. Grate job bud. Ive yet to race mine on a track.
@the_stable5534Ай бұрын
@@Marine2111usmc yes it does, and he just figured out his wastegate issue. So he’ll be turning it up!
@Marine2111usmcАй бұрын
I cant wait to build up my block and run a whipple. Or vmp blower. Possibly a paxton lol im still torn. Lol.
@the_stable5534Ай бұрын
@@Marine2111usmc I love the whipple, but I hear the vmp hits way harder. I have a vortech on my 96gt so I wanted something different for the boss
@CrowdKillerSN95Ай бұрын
Clean SN95 👌🏽
@the_stable5534Ай бұрын
@@CrowdKillerSN95 Thank you!
@Marine2111usmcАй бұрын
Full bolt on?
@the_stable5534Ай бұрын
@@Marine2111usmc yes but has a gen 5 whipple as well
@Adrenaline_ExpeditionsАй бұрын
Fire looking FOX
@the_stable5534Ай бұрын
@@Adrenaline_Expeditions too bad it’s not in the streets yet🫢
@Adrenaline_ExpeditionsАй бұрын
Big numbers! Turn her up!
@joshuahiggins5313Ай бұрын
How tough was getting the old K-member off?
@the_stable5534Ай бұрын
@@joshuahiggins5313 it wasn’t too bad, just have to watch out for the power steering lines on the rack
@joshuahiggins53132 күн бұрын
@@the_stable5534thanks bro what’s the pound feet to Torque it down to motor mounts and frame? Literally doing this tomorrow?
@the_stable55342 күн бұрын
@@joshuahiggins5313 I’m not sure off the top of my head and I don’t want to give you wrong info. I’d look it up online, on the forums or the k member directions might tell you
@79chevy901Ай бұрын
I watched all your videos on the blower install and enjoyed everything.
@the_stable5534Ай бұрын
@@79chevy901 Thank you so much! Glad you enjoyed them!
@79chevy901Ай бұрын
@@the_stable5534You’re welcome.
@79chevy9012 ай бұрын
That’s a super nice pony now with the blower!
@tipsandknowledge-wz7rd2 ай бұрын
. what are your goals for your channel
@RASHELMIA-uy6vi2 ай бұрын
Your Need KZbin SEO Grow Your KZbin Channel
@boostf-15092 ай бұрын
Hell yeah! Now I want a boss! Especially to match the f150
@the_stable55342 ай бұрын
@@boostf-1509 a matching boss and F150 would be a dream!!!
@thegruntmaster1172 ай бұрын
Awesome build so far! Any plans to do any suspension like from Steeda to help her hook? And what about an oil cooler and larger radiator, GT500 cooling fan?
@the_stable55342 ай бұрын
@@thegruntmaster117 thank you! I’ve taken it to the drag strip twice so far! Was able to cut a 1.5 60’ on all stock suspension! Once I finish posting the build videos, the track videos are next! But to answer your question yes! Definitely some new suspension parts will be coming, if I start running into cooling issues I’ll address that then as well
@tipsandknowledge-wz7rd2 ай бұрын
your video is so very nice, your video is great. What are your goals for your channel, do you want to get better in the future,
@jamespettersson-qi2eg2 ай бұрын
RÄTT ÅT DOM, HAHAHA HAHAHA, KARMA
@rx720bfc2 ай бұрын
Ford barra 6 enters chat.. . There's plenty of stock bottom end barras here pushing 800-1000whp +
@the_stable55342 ай бұрын
True, but this is just a stock bottom end 2v over 500+. Teksid block is already here, maybe we’ll have a built bottom end for next summer🤔
@Richard-pt4vf2 ай бұрын
Chunk n Pierre were fat Boas but they cldda got Th Girs with thissun😅😅😅😅😅😅😅😅😅😅😅😅
@74OBOY2 ай бұрын
Just another dyno vid without showing the numbers!
@the_stable55342 ай бұрын
I linked the full video to it, for anyone interested 🤷🏽♂️
@GoogleAsho-qs1vx2 ай бұрын
It's screaming to be let loose into a crowd!
@the_stable55342 ай бұрын
😂😂😂
@Botbasher2 ай бұрын
You know how you get a Moustang through the 1/4 fast?? Put a crowd at the end of the track! 🤷🤣
@the_stable55342 ай бұрын
@@Botbasher lmao that’s a good one
@69BigLou2 ай бұрын
Love the 2 Valve content bro! I got a Vortech 01 Bullitt. Mines on the basic vortech reflash and a cheap CX racing intercooler. Im only likely 360-370 whp. My PB is 12.8 @113. Keep it up bro!
@bodyshotjake74752 ай бұрын
Ok so I had an S trim and upgraded to an Si trim and gained 3 psi no other upgrades. Same 3.125 pulley. I wonder if they are offering the V1 to be upgraded to the Ti……???? That wasn’t an option before. Anyway, keep it off thd limiter and keep good fuel in it. It will last
@the_stable55342 ай бұрын
I’m not sure about that, I got this v2 si on a really good deal. Wouldn’t hurt to ask vortech. Absolutely, going to fix the damage cam and keep pushing it!
@2valve4six732 ай бұрын
Update? Still running ?
@the_stable55342 ай бұрын
I posted an update video about a month ago. Found a chewed up cam lobe went I was replacing the valve cover gaskets. Gonna fix and keep sending it!
@2valve4six732 ай бұрын
@the_stable5534 just seen that. Only discovered your channel yesterday. I have a V1 Si making 430hp/12lbs at 6200 on a 3.12 pulley and 93 octane thinking about doing a 2.79 and an E85 tune
@the_stable55342 ай бұрын
@@2valve4six73 that’s not bad at all! I wanted to switch to e85 as well. I already put the 2.89 (I believe) pulley on. Never got the car dyno’d again after
@2valve4six732 ай бұрын
@@the_stable5534 so I wouldn't have to retune if I pulley down and stay on 93?
@the_stable55342 ай бұрын
@@2valve4six73 so I don’t know if this is the correct answer but I didn’t. We dropped down the pulley and I watched the AFR while driving it and it seemed fine still. Once I get it running again, I should put it on the dyno and double check the AFR
@Botbasher2 ай бұрын
And the total is?? All I see is another loud Moustang!! 😂😂😂
@the_stable55342 ай бұрын
Loud was the total🤫 lol full dyno video coming soon
@Botbasher2 ай бұрын
@the_stable5534 not worth the wait for a run of the mill Moustang build. Good luck!
@the_stable55342 ай бұрын
@@Botbasher it’s 2024, not all guys have to like cars. They can be in the kitchen too🤷🏽♂️
@Botbasher2 ай бұрын
@@the_stable5534 insults... and uninformed insults at that. The predictable response from an insecure Verstappen wanna be. 🤣
@the_stable55342 ай бұрын
@@Botbasherya got me🤷🏽♂️ thanks for the view and comments!
@tipsandknowledge-wz7rd2 ай бұрын
If you want I can talk about your KZbin channel and how to grow it
@tipsandknowledge-wz7rd2 ай бұрын
Hi, Your videos are very nice, if you optimize your channel and make videos with it, you will get a very good profit in the future.
@chustinharris23423 ай бұрын
🔥 🔥
@chustinharris23423 ай бұрын
Smh always jalen fault lol. 🙄
@the_stable55343 ай бұрын
Always 😂
@969Garage3 ай бұрын
How wide are your front rims . Some people have problems with 9 inch wide wheels and those coils
@the_stable55343 ай бұрын
17x9, they are OME cobra rims. I haven’t noticed any issues. The car is down right now, but I’ll double check the clearance
@969Garage3 ай бұрын
@@the_stable5534 I'm running 18x9 and don't want to run into issues
@the_stable55343 ай бұрын
@@969Garage yeah, that’s good to know for the future if I change the rims
@Tasnia_Rahman_Tisha3 ай бұрын
Hi Dear How are you? Great. Your Content is fantastic, But your video SEO optimization section area is not perfectly up to date. Out of 100 that's score is 29.3, that's why your video is not reaching out to the people and you have not many subscribers, views, likes, watch time and comments. I can help you grow your KZbin channel. If you don't mind can we talk about it for a while?
@tylerokerner85363 ай бұрын
Bro that sn is clean 🇺🇸🦅🏎️🏎️🏎️🏎️🏎️🇺🇸🇺🇸🦅🇺🇸🦅🦅🏎️🦅🇺🇸🏎️🇺🇸🦅🏎️🇺🇸🦅🏎️🇺🇸🦅🏎️🇺🇸🦅🏎️🇺🇸🇺🇸🇺🇸🦅🦅🦅🏎️🇺🇸🦅🏎️🇺🇸🦅
@FreelancerTaniaakter3 ай бұрын
Dear, I enjoyed watching your KZbin channel videos. I want to be a regular viewer of your channel. But there is something in your channel, I want to show the problems.
@tipsandknowledge-wz7rd4 ай бұрын
I would like to help you if you want you can contact me
@tipsandknowledge-wz7rd4 ай бұрын
good video
@the_stable55344 ай бұрын
Thank you!
@tipsandknowledge-wz7rd4 ай бұрын
@@the_stable5534 I want to give you some advice about your KZbin channel so that you can grow your KZbin channel
@tipsandknowledge-wz7rd4 ай бұрын
@@the_stable5534 I see there are some problems in your channel, if you can solve the problems then your channel will reach more people so I want to give you some advice about your youtube channel so that you can grow your youtube channel more.
@salmansabbirl4 ай бұрын
If you give me permission, I will share some information with you to increase the channel. You get lots of subscribe and views. best regards
@salmansabbirl4 ай бұрын
Hi The_Stable!! Hope you are well. Your video making is very good. Your content ideas are very good. Thank you so much
@the_stable55344 ай бұрын
Thank you!
@salmansabbirl4 ай бұрын
@@the_stable5534 You also welcome🥰
@salmansabbirl4 ай бұрын
@@the_stable5534 If you give me permission, I will share some information with you to increase the channel. You get lots of subscribe and views. best regards🥰
@salmansabbirl4 ай бұрын
@@the_stable5534 If you give me permission, I will share some information with you to increase the channel. You get lots of subscribe and views. best regards
@salmansabbirl4 ай бұрын
@@the_stable5534 If you give me permission, I will share some information with you to increase the channel. You get lots of subscribe and views. best regards
@Bergo1014 ай бұрын
FJ best car ever build. Love it.
@Jesse_L4 ай бұрын
Hell yeah man just pull out the engine and be patient and take your time do it right do it once. You will be happy if you do it right
@the_stable55344 ай бұрын
Absolutely! Especially with the other two mustangs running, I can take my time and not rush
@TmanGT2814 ай бұрын
Shoot. Sorry to see this. Looking forward to seeing what you do with it!
@the_stable55344 ай бұрын
@@TmanGT281 It’ll be back better!
@sandraforbes59074 ай бұрын
Promo SM
@beezowdoodoozoppitybopbopb94884 ай бұрын
I cant find an update on your playlist of this. How did it run? Any dyno figures?
@the_stable55344 ай бұрын
It’s still sitting the same, I bought the 2013 boss 302 so it’s been on the back burner. The boss is finished up so foxbody content should be coming soon!
@bevo654 ай бұрын
Thanks for serving our country, brother. Which branch were you in? I was USAF 1994-98.
@the_stable55344 ай бұрын
Thank you for your service as well. I was also USAF
@bevo654 ай бұрын
@@the_stable5534 When you said "tech school," that's what I figured! 🤠