Dad Gear Life

Пікірлер

@TSyoyo Ай бұрын

You really need something like this with these mowers because that little plastic tray you get does not do anything but make a mess. I like your set up 👍

@abbeyp8834 7 ай бұрын

Thank you! I hear of people fixing it with Liquid Electrical tape, any thoughts?

@shawnlavigne9069 Жыл бұрын

Not the stripper, the inmost portion of the wire cutters are for hard cutting.

@shawnlavigne9069 Жыл бұрын

Speak up Sonny, I must be going deaf.

@UbuIbi Жыл бұрын

these companies make it diff for consumers. this is a smart alteration to oil change👏. I just had mine delivered today and watching these vids for knowledge. thank you for this. will alter later. forgot one question about the piping length, it appears that with the extra piping, the mower would require additional oil even after checking the stick. would this have any affect? thanks

@dadgearlife 9 ай бұрын

Glad to help! I'm sure it would require a small amount extra, but not that much.

@gregblackburn4280 Жыл бұрын

All that Craftsman needed to do was put a "V"-shaped dent into the frame to allow the oil to drain. The frame is a stamped steel part, there is no reason they couldn't have done this except they were too cheap.

@dadgearlife 9 ай бұрын

Agreed

@codylorentz3144 Жыл бұрын

Finally found what I was looking for. Mine isn’t broken. But I wanna lengthen the cable so the battery sits in my tool belt

@dadgearlife 9 ай бұрын

That's a good idea. Glad to help!

@JayTaylor447 Жыл бұрын

Best youtube channel out there. Great review young man.

@ericblankenship2433 Жыл бұрын

Why did you need the 90 deg bend if you're going to use a 1/2" tube to channel it to the oil pan? Why not just straight out?

@dadgearlife Жыл бұрын

I guess you don't really need the 90 degree elbow. You could go straight out. If I remember right I think it was a really close fit with the battery.

@randalltanner9316 7 ай бұрын

On the oil drain you can't use a 3/8 pipe because it will be up against the battery

@scottrickards4918 Жыл бұрын

Just bought one off of offer up- mine is in great shape, guy changed oil, plug, filter. Excellent idea, but no manual or oil attachment. I printed manual online and will make up this rig before next change. Thx man

@dadgearlife Жыл бұрын

Thanks! Hope this helps you out!

@studydude 2 жыл бұрын

That outer Shell for the Drone is all about water protection, That is heavy Rain Proof material dude. Also, this is the best deal on the Mini 2 Right here.

@markclark4324 2 жыл бұрын

Great idea and I think the cap on the end is a good idea also due to the ball valve might get bumped and open part way. Thank you for the video.

@dadgearlife Жыл бұрын

Glad it helped

@monicabeaubouef3310 2 жыл бұрын

I am wanting to learn to do things myself....lady here...ehhhh where would i get those parts? I would pay for someone to build it for me

@k.c.8872 2 жыл бұрын

I'm glad I'm not the only lady here! I'm about to do the same thing here lol I just bought a tool box for my tools already changed out the spark plug n battery. We got this lady!

@monicabeaubouef3310 2 жыл бұрын

@@k.c.8872 I got it done! I had a hard time getting the oil plug off for some reason and had to get help with that, but I took the video and instructions and the gentleman at the Ace Hardware got me fixed up with all the pieces! I ended up getting a 3” pipe rather than 4 but worked out.

@dadgearlife Жыл бұрын

Sorry, I dont check the comments very often. But I'm glad you were able to get it working!

@name5949 2 жыл бұрын

Hello buddy what do you think of the bond? I'm seeing some video's and people are saying that the blade keeps popping out of place 🤔

@dadgearlife 2 жыл бұрын

I haven't had that issue with mine. If you're talking about the blade not locking, its not supposed to. It doesn't have an actual lock. I think it's a great tool for beginners or if you're on a budget.

@marcbrazzers 2 жыл бұрын

this actually worked for me, the fuel float thingy that floats in the baffle tube was full of gas. I replaced the float and it works. Also just to mention, on my 1998 speedster, I had to remove the wake pole support bracket in order to pull out the fuel baffle (otherwise it hits it). Only a few bolts but super hard to access unless you're pretty much sitting in the engine compartment lolol.

@dadgearlife 2 жыл бұрын

Yes, I remember having to be basically upside down wrenching at one point!

@brokensword2621 2 жыл бұрын

Great review. Very cute and also powerful drone. Happy flying for you 😃

@dadgearlife 2 жыл бұрын

I love it

@fishycomics 2 жыл бұрын

They had this at $400.00 the day I went I missed thesale Lol

@dadgearlife 2 жыл бұрын

I'm sure it will be back on sale soon. Especially for black Friday!

@fishycomics 2 жыл бұрын

@@dadgearlife Yes they will add it in again for example the gopro Hero 9 is on sale, soon as that goes off I bet it will drop

@TheGhostPlanet 2 жыл бұрын

Great observation about the other bundle. The price is not worth the extra money. I just bought the charging hub and two batteries are enough that comes with the Costco bundle.

@dadgearlife 2 жыл бұрын

Glad you enjoyed the video and hope it helps you out!

@davidcass4958 2 жыл бұрын

This is nice, I came up with this 30 yrs ago with a lawn tractor I had

@dadgearlife 2 жыл бұрын

Thanks, glad you liked the video!

@kevqx1685 3 жыл бұрын

Wheres the charger of the batery :(

@dadgearlife 2 жыл бұрын

There is no wall charger, but a charging cord is included

@BobJones164 3 жыл бұрын

To make it match the fly more combo, you also need to buy the USB charger (IN ADDITION TO the USB Charging Hub). The DJI USB Charger charges at 12 volts, which results in much faster battery charging than a standard USB charger.

@toddhenry7362 3 жыл бұрын

Just did this on my R110 - thanks for the directions and parts list, saved a lot of time and guesswork!

@dadgearlife 3 жыл бұрын

Glad to help!

@JayTaylor447 3 жыл бұрын

This guy is a legend... what a great review.

@dadgearlife 3 жыл бұрын

Thanks!

@ezio8591 3 жыл бұрын

very smart idea, I got the yard machines version of this and going to do an oil change soon. This was helpful, cheers

@dadgearlife 3 жыл бұрын

Glad it helped

@jamesh972 3 жыл бұрын

Nice unboxing review, just picked one up at Costco yesterday, seems like a good deal for me and will suit my needs to film primarily when out hiking/backpacking so I need the small lightweight package. Mine had an extra set of sticks for the controller - they were tucked away in a tiny bag. Looking forward to playing with this over the summer!

@dadgearlife 3 жыл бұрын

So glad you enjoyed it! I'm a small channel and just getting started. I think the Mini 2 is a great value for what it offers, and the Costco bundle makes it even better with the extra battery. Happy flying!

@nickzanin 3 жыл бұрын

I agree about the bag, form over function, pretty pointless. Did your drone come with a charger? Mine came with a cable only.

@dadgearlife 3 жыл бұрын

I didnt get a wall charger. Mine came with the cable only. Heres what DJI says on their FAQ page "It supports Quick Charge 2.0 18W." The website also states "You can directly connect the aircraft to a charger with the micro USB cable, or use the Two-Way Charging Hub to charge up to three batteries in sequence. Please use with power chargers that are 24 W or below." It says micro USB but I think they mean USB-C.

@uncoiled988 3 жыл бұрын

Where is the oil filter

@dadgearlife 3 жыл бұрын

This model has no oil filter

@baileyfrazier2635 3 жыл бұрын

I just bought a 3 year old Murray version and decided to buy a small pump and stick a drain hose down the dipstick and draw the oil out that way.

@stilmotionpicture 3 жыл бұрын

this is a great price!

@dadgearlife 3 жыл бұрын

Yeah, I think its the best deal out for this drone right now.

@kadenvillicana2424 3 жыл бұрын

Nice video man I’m getting mine tommorow (update I LOVE IT) best money I have ever spend I RECCOMEND 100% I reccomend getting the base model then buying the batteries when u get good because it lasts forever

@dadgearlife 3 жыл бұрын

Yes, that's why I got this model. Batteries aren't too expensive to buy aftermarket and you can get them later if you think you will need them,

@CorollaGTSSRX 4 жыл бұрын

Thanks for going into such detail. I'll be doing this today :)

@dadgearlife 3 жыл бұрын

No problem. Some people dont like super granular detail but I do. Let me know how it turned out!

@CorollaGTSSRX 3 жыл бұрын

@@dadgearlife I was half lucky.... Kinda. I don't know much about the ski before I bought it, but it had been sitting. I put normal gas in it, drove it around and clogged the fuel filter multiple times...and after a few weeks, drained the tank..... All of the coating had come off the fuel float.... All of it, and it was all sitting around in the tank..... Cleaned the tank, got a new float in there, good as new

@markbrown332 4 жыл бұрын

Im 2:45 in to the video. I can tell you that you have approximately 3/4 of a tank of gas. 😎🤙 You can see the fuel level through the tank. I love the easy solutions! Plus your eyes never lie 😉 However, if you are a serious boat enthusiasts, you have to fix it or you cant sleep thoroughly at night 😎🤙

@dadgearlife 3 жыл бұрын

Thanks for that!

@jimbrayley6781 5 жыл бұрын

Awesome video! Very well done! I followed it to a 'tee' and my gauge is now working like a charm! Lots of fun removing that ski bar bracket though! Lol. Thanks again!!

@dadgearlife 3 жыл бұрын

I'm glad it worked out for you! I