HPD catchcan looks pretty, useless without a filter,l used stainless steel wool, helps catch the oil in vapour better

Hey mate, did the awning brackets mount to the extrusion rail on the Roof top tent or did you have to drill holes?

Hi Mate, Which wire did you hook up to the dimmer switch? I was going to do something similar. But side of it did you connect to, the - or the +. As you may know you need to connect Park light + and Dash light -. Where was the best to T-off for these 2 for you ?

How many mounting brackets does it come with?

Thanks for the great video buddy

Did you lower tyre pressure on the ski trailer mate

What if you open your tent

Hey bloke. I'm looking to get myself an awning. Does the bag get water In It when It's packed up? Cheers.

My thermistor went out 3 months out of warranty. Also, my cover is tearing where the Velcro is. Seems to be cheap material. I replaced the thermistor. I won’t be getting another Waeco/Dometic again.

Hey mate. Did you notice a loss in power or any rough idling etc before you took the manifold out and cleaned it all up?

Gnarly Bar hey mate

Absolutely unreal hookup mate

Really enjoyed this solo launch cheers mate

This is priceless information cheers mate

I've heard that the motop isn't strong enough to hold a free standing awning. Have you had any issues ?

looks good mate putting mine in today 👍

Great video! I've send you a message on Instagram! Greetings

What size is your tent mate?

Thanks for the vid, they look like a great little boat. What motor are you using on it, what sort of range could you get out of it?

The other big tip is remove the black cover before removing injection pipes 10x easier It so much easier to do valves with injectors out as well to turn engine to top dead. I'd replace them or rebuild if your that far anyway

Wheer were you at 7:20 - Looked very shallow - What was that dark object under you ??

Was that the Amity Passage ?? What time was it because I noticed a few boats going out as you are coming in ??

Hey mate, love your vids I’ve got an HDJ79RV also and love it. Just wondering what head lights your running are they JTX?

My egt gauge needle works intermittently. Comes on and dissapears. Have you had this issue?

Thank you for sharing my young bloke has a 06 100series with 170000 no it we are going to do a clean and catch can thank you for the info 👍🤟👌

You must be due for some diff breathers 👍

Hey mate, just wanting to know what your boost max out on and if it’s stock ?

97,000 on the clock... not bad

Ripper vid! I need to do this + NEED catch can on the ASAP!

Hey mate, how much of a job was the intake clean? And what else did your address while you had the crossover taken off? Just wondering as the old fte is approaching half a mil and likely in bad need of a clean

Had my Motop 270 awning on one outing with a little wind and it fell apart. Guy ropes, sand pegs and all support legs set up. The actual hinge and aluminium are so thin there’s no was it could handle its 35kmh rating. I was in 10-15kmh and it just literally fell apart. They won’t honour the warranty even though it was brand new. If you want an awning that will last avoid the sh*t out of this one. MW is just cheap import garbage unfortunately. At $900.00 you think you would get a bit of quality.

Probably a silly question but which belt plug do you use for the passenger seat? Is it the one that pops out in the middle of the seat or is it the one that is next to the drivers plug. Cheers

Hey mate do you know if you can get walls for these?

Nice vid mate 👍 interesting to see the motop version! Very similar to the drifta one size wise. I've just ordered a drifta 270 which I'm eagerly awaiting delivery on. I was a bit dubious about the quality of the drifta until I saw it in person. Good quality for the price - better than I expected! One thing I found really interesting when I saw it on display - they had the basic awning brackets securing it to the drifta RTT - not the reinforced ones and it sagged heaps! So the mounting needs to be very solid. I saw a vid on the right way mount it using 2 reinforced brackets and 2 standard ones, I'm particular having 2 brackets close together at the hinge end. I noticed yours flexing a bit so might be worth a look . . . kzbin.info/www/bejne/g53LooufnpilrNU Also a good tip for strapping the end back instead of that bungee cord is a $13 rope ratchet you can get from Bunnings www.bunnings.com.au/grunt-6mm-x-240cm-rope-ratchet-tie-down_p0013505

Where did you purchase this from? I’ve been looking at MW Manufacturing and there’s doesn’t include the lights, pantry bag etc

How does the bunji chord go vs ratchet type straps from others? Seems like the tension would vary with the wind

Any chance of a follow up review after you have used it out and about while camping mate?

Looks nice only down side I hate is that it doesn’t run flush with the tent most ppl climb in through the side not the back so that gap where is a pain the arse

Awesome thanks mate

that was amazing sir Enasick

This was an awesome review mate! I like the idea of access from the back still being an option, might make this work for my setup. Keep them coming!

Hi. !!! Clouse EGR and be happi А сколько сажи внутри клапанов, Плюс сажа даёт износ цилиндров...

Hey mate I’m having trouble with my gauge dimming with the dimming switch on the interior, works with the headlight but not with that switch

hectic ute brah they are so hard to get because everyone wants them

This is so sick!!

I didn't hear anything about an engineer report that is needed, or don't you need one in QLD

Hi there Cruisin time, Next time you do a valve adjust, adjust the cross head first as it is important to have it opening the valves at the same time. I put down ward pressure on the cross head and move adjuster instil it JUST moves off the valve then lock it up. Carry out the rocker adjust after that. Toyota complicate an easy process.

This is beautiful where is it

Hi Mate Really enjoy your channel Couple of questions on your cruiser as I have the same model 290K on clock Have you done the bottom end ? Slippers etc hearing conflicting info Did you look at the later model 79 series single cab seats before the XR ones you fitted ? Regards Kev

So good! What entrance track did you take? I hear there are two? Easy one and a fun one?