CARRVVLOG

Пікірлер

@chrisbecker3629 7 күн бұрын

Ratchet wrenches are a huge huge help. I’ve since upgraded my tools to an electric ratchet wrench and it’s a game changer for quick wrench work.

@williamtarr9758 13 күн бұрын

Just did my tails tonight looks bad ass

@diznylnd 13 күн бұрын

@@williamtarr9758 that’s awesome!

@williamtarr9758 13 күн бұрын

@diznylnd it wasn't to bad took me and hour or 2 to do both tails now have the smaller ones to do tomorrow

@williamtarr9758 13 күн бұрын

So the brake light is a red led ??

@diznylnd 13 күн бұрын

@@williamtarr9758 yes! 👍

@hartmutthomas989 Ай бұрын

2:47👍🥳🚀

@lucidfk7 Ай бұрын

Did you use Alla lighting for the back up light as well? I’ve found the chrome bulbs and the brake light bulbs but wasn’t sure what you used for the reverse light

@diznylnd Ай бұрын

@@lucidfk7 I didn’t change the reverse bulbs. 😉

@maxortega1890 Ай бұрын

Do you have a link for the chrome bulb to get rid of the orange hue

@diznylnd Ай бұрын

@@maxortega1890 I don’t sorry. You can find them on eBay and Amazon.

@maxortega1890 Ай бұрын

@@diznylnd yea haha im tryna find them and I can’t I like your civic! I have a blacked out one and I’m rocking a casale duckbill but I’m just tryna clear clear the tails

@lucidfk7 Ай бұрын

if you still needed them

@maxortega1890 15 күн бұрын

@@lucidfk7yea still looking for em do you have a link?

@howa08 2 ай бұрын

@carrvvlog any noticeable wind noise come from the lights? I've been contemplating installing them on my truck but I do a lot of highway miles and I try to keep additional wind noisy things to a minimum.

@diznylnd 2 ай бұрын

@@howa08 hello 👋. No extra noise that we have ever noticed and we long haul the truck from CA to AZ twice a month in summer. We also have a sunroof so don’t know if that would make ours a bit more noisy than a slick roof. We haven’t noticed any change. Hope that helps.

@ducebigalow8834 2 ай бұрын

Hey do you have to connect all the wires for it to work? I tried connecting 1 wire to test it and nothing happened.

@diznylnd 2 ай бұрын

@@ducebigalow8834 you have to have the power and ground connected. You can decide if you also want it to be a turn signal but you must also tap that wire. Hope that makes sense.

@ducebigalow8834 2 ай бұрын

@diznylnd hi thanks for replying. I was trying the turn signal first but did not connect the ground to anything. I'm guessing I need to connect the ground as well. I wanted to ensure it all worked prior to remove the rear garnish and fish the wires up.

@ducebigalow8834 2 ай бұрын

Do you have to disconnect the battery.

@gaziali6125 2 ай бұрын

Do you have a part # for the blue dome light?

@diznylnd 2 ай бұрын

@@gaziali6125 hello 👋. I don’t have the part # but you can look up Honda Access led dome light and find it!

@gaziali6125 2 ай бұрын

Found it but mine didn’t come with a ground wire. Any idea where I can get the ground wire?

@ivanchan6665 3 ай бұрын

👍

@s2flyyprductin296 3 ай бұрын

Where did you get the clear covers from plsssss

@diznylnd 3 ай бұрын

If you watched the video you would know lol. It shows the whole process of how to make them! :>)

@fastlane2914 4 ай бұрын

Massage respect for doing so much yourself. Been following your fk8 journey and the cars looks amazing, I like your new steering wheel 👌

@diznylnd 4 ай бұрын

@@fastlane2914 thank you!!! I appreciate it!

@fastlane2914 4 ай бұрын

@@diznylnd👌👌 one question though, is there no way you can remove the air guides for reinstall, rather than cutting them off? Incase you want to go back to oem

@tgyluffy 4 ай бұрын

Just got one for my honda civic LX , can’t wait !!

@diznylnd 4 ай бұрын

Very nice! Thanks for watching the video and the comment!

@michaelcleary9745 4 ай бұрын

All that video and didn’t show em at night, I don’t get it, nice install but they are meant to be seen at night

@SFL.Racing 4 ай бұрын

Thank you for mentioning about Blackhawk which is what I did and does not fit…

@Younexx_24 6 ай бұрын

Damn those look cleaannn

@diznylnd 6 ай бұрын

Thanks 🙏

@charliesmith7942 6 ай бұрын

That's overkill for a daily

@diznylnd 6 ай бұрын

I didn’t say anyone else needed to use this oil, It’s what I choose to use. Thanks for commenting your opinion though. 👍

@lauragabriela3892 7 ай бұрын

Hey! Just about to do this to my FK Civic. What happens if you try to add water with the wiper controls? Will water still come out, or does it not work anymore because of the motor you took out? I hope that makes sense lol

@diznylnd 7 ай бұрын

Hi 👋. I don’t recall disconnecting a washer fluid line, so I guess it would still put fluid out. I’ve never used the rear wiper so I don’t have a definitive answer. Hope that kind of helps. 😉

@lauragabriela3892 Ай бұрын

@@diznylndHey! Super late response haha. I'm just about to install this lol. Were there any issues if you took the car to a car wash? Hopefully not...

@sdr5757 7 ай бұрын

What year Navigator? You selling the seat you removed?

@diznylnd 7 ай бұрын

I don’t have the seat anymore. Sorry

@davidlowe3793 7 ай бұрын

Awesome I just got my same intercooler in . Along with my cat less downpipe … so excited but yet nervous about taking this bumper off lol as well

@diznylnd 7 ай бұрын

Yay for new car parts! Good luck with the install!! Just give yourself ample time so you don’t feel rushed 😊. Have a good weekend.

@davidlowe3793 7 ай бұрын

@@diznylnd did you flash a tune right away for the intercooler? I have a flash pro and I plan a n uploading a phearable tune just not sure if I’ll be able to get it all done the same day ?

@randybeach9907 7 ай бұрын

Great job !

@diznylnd 7 ай бұрын

Thank you!

@96spectyper 7 ай бұрын

Thanks for this video. Only that shows the difference the mirror makes. 🔥👏

@diznylnd 7 ай бұрын

You’re welcome! Thanks for the support!!!

@jamesm2889 8 ай бұрын

Thumbs up for glittery greens

@diznylnd 8 ай бұрын

Thank you 😊

@Blake_Drago 8 ай бұрын

They look so good. I’m thinking about doing it to my type r. I did the same thing to my 2019 Sti. I cut open the oem taillights and blacked out all the chrome and sealed them back up, so I know how time consuming it is doing all this. It’s very tidious.

@diznylnd 8 ай бұрын

Definitely very time consuming! Good luck on the project if you decide to do it! Thanks for the view and the comment! 😊

@Adrian_E92 8 ай бұрын

This came out perfect can I pay you to do mine 🙏🏽

@diznylnd 8 ай бұрын

Haha. I don’t ever want to do them again, so much tedious work! Definitely worth it though! Good luck on yours if you do decide to go forward with it ! Thanks for the kind comment, I appreciate the support 😊

@austintrueb4145 9 ай бұрын

Did you use a template if so where did you get it at

@diznylnd 9 ай бұрын

Yes. It comes with the OEM set in the packaging

@RazoE 9 ай бұрын

Love the hot knife idea! I'm definitely going to have to try that

@diznylnd 9 ай бұрын

Thanks ! Hope it goes well!

@yummy1234098 10 ай бұрын

will this work with an Aviator?

@yummy1234098 10 ай бұрын

but to remove the console and install the seat

@diznylnd 10 ай бұрын

As long as the seats didn’t have arm rests attached it should in theory work just the same!

@michaelskff 10 ай бұрын

What are you doing trying to make mods for cars you should be in the kitchen making sandwiches

@diznylnd 10 ай бұрын

Omg lol. 🤷🏻‍♀️

@SmokyMTNguy_ 10 ай бұрын

Thank you for this! I’m wanting to do the same and remove the jump seat and add a console. This made it easier to see the install.

@diznylnd 10 ай бұрын

Of course!!! Glad it is helping people out. I just did it again with and 2004 Expy and fitted in the Navigator console removing the jump seat. Turned out great!

@SmokyMTNguy_ 10 ай бұрын

@@diznylnd nice!! I saw a video where you changed the license plate lights to led on the white Navigator. What size bulb and brand did you use?

@brianmillican4985 10 ай бұрын

Awesome video

@diznylnd 10 ай бұрын

Thank you so much. I appreciate it!

@howardblidgen7067 11 ай бұрын

Great job!! Loved your video

@diznylnd 11 ай бұрын

Thank you 😊. I really appreciate the feedback and support.

@diznylnd 11 ай бұрын

Thank you 😊. I really appreciate the feedback and support!

@fourbootsremodelit2968 Жыл бұрын

Great videos but do you have the link for all the tools and lights you put in? That would be a huge help

@diznylnd Жыл бұрын

Thank you 😊. I put them up on the screen in the video so you could look up the tools I used all purchased on Amazon!

@heaven4Now26 Жыл бұрын

I like

@shenray337 Жыл бұрын

So far how’s it going? Catch a lot of oil?

@peterbodi3870 Жыл бұрын

Hi What do you think about motul 8100 power for type-R? Is that can be good as well?

@diznylnd Жыл бұрын

Hello 👋. I love it. I just did my second oil change with it at 6000 miles on the car! Honda OEM filter again!

@peterbodi3870 Жыл бұрын

@@diznylnd So now you have v300 power in the engine And you will put 8100 power next? Am i say right?

@homemedia2921 Жыл бұрын

Hi, great video, can you give me the name of the savage yard you got the console from.

@diznylnd Жыл бұрын

Hi 👋. I purchased it on eBay ! Thanks for watching.

@unice1970 Жыл бұрын

This is a awesome video! I was wondering how my white 1500 would look with the clearance lights! Nice job! I’ll be ordering my set soon. Thanks for the video

@diznylnd Жыл бұрын

Thank you so much for the kind words! We love the clearance lights! The OEM set is perfect! Good luck with the installation.

@vonduwidow7115 Жыл бұрын

omagahd why I havent seen ur channel a long time agooo i feel so late 😂 it feels great to have more like females like you in the community! more power!

@diznylnd Жыл бұрын

Hi 👋. Thank you for the kind words I really appreciate it!!! 😊

@jimjohnson9648 Жыл бұрын

Hi what tool did you use to install the smaller bolts from the console into the floor ? I can barely get my fingers in there lol

@wild_cumulus_cloud Жыл бұрын

Hello Just confirming, the rear garnish panel is held by tabs only. No screws inside the bumper to remove before popping it off? Basically you can pull it from out side with a trim tool. Thanks

@diznylnd Жыл бұрын

Hi! Yes you can pull it from the outside, I just didn’t want to risk marking my paint 😉

@wild_cumulus_cloud Жыл бұрын

I was looking at the bumper from inside to see if I can remove the panel tabs from inside. Actually for the Si model, we have mufflers sitting on both sides blocking some access. For your Type R, you have that shield that you removed first. Will figure something out 😅

@mo.eltriki Жыл бұрын

Did you still have the seat it is for sale ?

@diznylnd Жыл бұрын

No, I don’t have the seat anymore. Sorry

@darrenbull3622 Жыл бұрын

What car cover is that?? ❤😮😮😮

@diznylnd Жыл бұрын

Hello, it’s just a soft cover I ordered on Amazon!

@darrenbull3622 Жыл бұрын

@@diznylnd Awesome! thank you, and I’ve ordered the Access dome light 👍😃

@aaronreyes1833 Жыл бұрын

I want to do this myself too but im afraid that ill break my tail lights xD

@diznylnd Жыл бұрын

I bought a second set so that if I messed up it wasn’t my set on the car.

@julitodelacruz7649 Жыл бұрын

How come yours turn red instead of blue?

@diznylnd Жыл бұрын

Hello 👋. Mine has been modified to be red so it matches the interior of the car! Someone on the Honda civic x gen forum modified them!

@damp7ernavigator Жыл бұрын

Good job :)

@diznylnd Жыл бұрын

Thank you!!! 😊

@stevewnuk2700 Жыл бұрын

Question: Is this reversible without any cosmetic damage from the delete? Cheers!

@diznylnd Жыл бұрын

If you keep all your parts I would assume you could just try and pop the delete piece back out and then re install the motor and wiper arm etc. no damage is done to the car or parts from removing them. At least not in my case. Hope that helps.

@stevewnuk2700 Жыл бұрын

Thank you. I am new to the track day game, and just got a new-to-me '21 CTR. For me, mods are prolly a year or two away. In what order would you do what mods to improve what is already the world's fastest front wheel drive production car?

@mojo5845 Жыл бұрын

What can you do if the philips screws are just loose and it moves without opening the housing?

@diznylnd Жыл бұрын

It sounds like your describing the screws possibly being stripped. You’d have to pull out the light and then see are they just stripped in the housing or the actual trunk lid. Hope that helps

@mojo5845 Жыл бұрын

@@diznylnd thank you for sucu prompt response. The lid it self has one screw that it is loose however the lid is firmly attached so I can't get the screws out neither the entire housing lid it self ☹️

@getbo-pu4dh Жыл бұрын

Did mirrors have the blind spot assist or is that only available for the FL5?

@diznylnd Жыл бұрын

Hi 👋. Mine didn’t have blind spot assist, not sure if Canadian or European markets did…

@livelikeadri1792 Жыл бұрын

Do you have the link for the soldering station or recommend one ?

Ең жақсы KZbin

Пікірлер