Charles And Cars

Пікірлер

@kurtgood2914 Күн бұрын

Thanks for sharing this and it is very helpful

@marcusmccurtis2660 2 күн бұрын

How much does a job like this cost???

@CharlesAndCars 2 күн бұрын

I'm seeing 3.9 hours for both valve covers... depends on hourly rate in your area.

@KSMike1 3 күн бұрын

Just finished the same job in my driveway. The ones I took off were these same OESpectrum shocks. They weren’t leaking and still felt fine but they both developed a horrible squeak after a few years. I went back in with KYB. This is one of the few videos I’ve seen where the lower ends were installed first, which makes this job way easier than getting the uppers first. If anyone wants the Honda torque specs, the lower is 58lb-ft and the uppers are 33lb-ft.

@straightup1234 4 күн бұрын

Thanks for video, is this the 1.8 hybrid engine? Looked at mine but don't seen to see a alternator belt is it behind cover?

@CharlesAndCars 4 күн бұрын

not the hybrid

@straightup1234 4 күн бұрын

@CharlesAndCars thank you 🙏

@ChristSavesUs 8 күн бұрын

Thanks for the star bolt size. I started on my car and then realized i needed that socket! It's the only bolt like that! Weird design for sure.

@michauw3567 9 күн бұрын

Where are you based? I am looking to buy ARMADA so it would be god to have a knowledgeable mechanic around 👍🏻

@patrickhamonet4633 14 күн бұрын

Where do you jack up the van?

@CharlesAndCars 13 күн бұрын

Look in owners manual for jack points under the rocker behind the front wheels on either side.

@AndersonGilkey-hz7vj 14 күн бұрын

Replace window motor driver side van door behind driver

@JayFeathers-y3i 16 күн бұрын

Sorry forgot the part #. 20691-19U00 which has been changed to 20691-19U0A at the parts counter of Nissan dealership. Took Us 1-1/2 hours taking our time.

@JayFeathers-y3i 16 күн бұрын

Had a P0420 code on my son’s 2010 Altima 2.5. Thought it was O2, Air/Fuel or Manifold/Catalytic. NOPE. This is exactly what I did this weekend. It’s a $28 ring gasket at the Nissan dealership. $14 + $14 shipping. I know, crazy. But it beats a Nissan Exhaust manifold ($800) or Nissan Air Fuel sensor ($150+) or Nissan O2($200+). Put car up on ramps, had my son hold the shop vac in the exhaust, covered the other exhaust tail pipe with duct tape, soapy squirt bottle at the location just like this video, bubbles! Torched the 3 nuts, used a breaker bar and broke them loose, removed the 2 hanger bolts to get the extra space needed to get the exhaust off the studs. Removed old ring gasket, installed the new one, tightened them up with my battery 1/2” drive impact. Started the car up, DONE. Check Emgine Light was gone instantly, I didn’t even disconnect the O2, it was gone immediately. $30. Amazing! Thank you!

@jaedon1521 16 күн бұрын

great videos. very detailed i like how you didn’t cut anything out.

@PaulHazeltine-i8t 16 күн бұрын

How do I remove the driverside tie rod bolt. The joint keeps moving, doesnt have tge same type of bolt and nut?

@jaybrown4497 17 күн бұрын

Hey sir can I call you if it's possible it's an emergency

@robertkaztro3277 17 күн бұрын

I changed my fluid last night and today a big spill of trans fluid appeared on my driveway. I’ve put the RTV and a new gasket on and it still leaks, can anyone help me out?

@RobertJene 17 күн бұрын

I'm trying to do this on a Buick LeSabre, it appears that the lock nut is part of the outer tie rod (integrated). Have you ever seen this before?

@CharlesAndCars 17 күн бұрын

I've never seen that. I'm guessing the lock nut is just locked up at the inner end of the outer tie rod end... A torch is your best friend to heat it up to break it loose.

@TheSponge945 18 күн бұрын

What size are those exhaust clamps you used for the tailpipe?

@SN1P3R808 24 күн бұрын

Great video! I'm at this point now taking off the timing chain doing a head gasket on a 2003 Tribute this car is the worst to take a part never i doing a V6 again lol

@edgarmuchavz8041 25 күн бұрын

nice video very helpful . I also have the same car Honda motor.

@MineCraft-iq3tn 26 күн бұрын

Hey i got a question could you possibly take a picture or video of where each line goes to the abs and post it because that would help me out alot

@CharlesAndCars 26 күн бұрын

Sorry, don't have that car any longer

@MineCraft-iq3tn 25 күн бұрын

@CharlesAndCars dam well thanks anyways

@Mobcertfied Ай бұрын

Replaced four still not working just going sell my Chrysler

@messiahmozgus Ай бұрын

Its annoying how they are front and rear but everywhere online calls them left and right. This makes no sense. I shouldnt have to order both if I only need to change the front one. I have no idea why they are labeled as left and right.

@charlescroucher8263 Ай бұрын

Great video. My car wants to stall when put in gear. Especially when trans is cold. No codes showing up do you think changing filter and fluids will help

@CharlesAndCars Ай бұрын

Impossible to say.

@shehuamadou321 Ай бұрын

Im about to do this but munes is a 2010 the valve gasket i got looks like the ine you first used yhat didnt fit ,im not sure if i need to go look for the other one?

@CharlesAndCars Ай бұрын

Look it up on rockauto.com

@sebasbabas3186 Ай бұрын

man love your video, simple and clear, thanks a lot

@CharlesAndCars Ай бұрын

Glad it helped

@aleciasanders5188 Ай бұрын

Thank you for the video! I just changed mine last night and this was a great help.

@CharlesAndCars Ай бұрын

Glad it helped!

@FaithRose-m4e Ай бұрын

What tools did you use

@kennyambrose2321 Ай бұрын

Great video I just want to comment about 2 things. Number 1 I was always under the impression that you should remove the master cylinder cap before pushing the brake piston back in due to pressure build up. I don't know if this is an old wives tale or not. And number 2. Pointing out that there is a difference where the wear annunciator is mounted on the drivers side and passengers side brake pads. Again a nice detailed video.

@messiahmozgus Ай бұрын

7:11 you didnt even say what this product is. What are you using there?

@CharlesAndCars Ай бұрын

use permatex ultra gray

@CharlesAndCars Ай бұрын

Are you asking about the gasket, not the sealant?

@CharlesAndCars Ай бұрын

Gasket set: www.rockauto.com/en/moreinfo.php?pk=917126&cc=1434461&pt=10710&jsn=1061

@messiahmozgus Ай бұрын

@@CharlesAndCars deleted my other reply since I think I got it mixed up with another thread. Thanks.

@kellyscottlindner9908 Ай бұрын

Thanks for the great video. Going to attempt this same repair myself. When you were bleeding the system did you have the other end of your tube in the antifreeze or was it just sitting in the funnel? Wasn’t sure if it would suck more air if I don’t put the tube down in the antifreeze inside the funnel.

@CharlesAndCars Ай бұрын

Just sitting in the funnel

@paulmateos6437 Ай бұрын

Thanks for the video mate!

@arguswil Ай бұрын

My turn 😂. Here we go !!

@sietafak Ай бұрын

Very informative, I hope this is my issue as well. Hard downshift all of the sudden on the highway, lost 5th. Limped it home, will inspect connector tomorrow. 260k miles on the van in the rust belt. Fingers crossed...

@Satyridatte Ай бұрын

i love you like a lost hiker loves a forgotten water bottle. like the dying man loves the priest, like the wave loves the shore

@jasonbarth7977 Ай бұрын

As a novice mechanic, I appreciate it how straightforward and to the point this video was including the camera angles. Thank you for saving me hundreds of dollars at the mechanic shop by making it so I could do this job myself. Great video.

@Thebeekeeper568 Ай бұрын

Is the jack point on the oil pan ?

@CharlesAndCars Ай бұрын

Yes, just make sure you use a block of wood to spread the load across the surface.

@logmaster27 Ай бұрын

No tensioner?

@CharlesAndCars Ай бұрын

No, this one is tensioned through alternator adjustment

@frankrizzo2724 Ай бұрын

So i put struts on my 97 riviera and the alignment is so far off i wont drive it around the block! Not sure what if anything i did wrong. Maybe i got the wrong struts but i doubt it. This ever happen to anyone?

@operatorsanonymous1741 Ай бұрын

Just picked up the parts to do this thanks!

@vbdino Ай бұрын

Thanks for the video, I changed one in my crv and it was easy. I dismantle the old one but didn’t figured why it stoped working. Motor looked fine, so was the brushes.