JD MTB

Пікірлер

@RAI_D 21 күн бұрын

Bro can you tell me how well does it perform with the shimano cassette on actual trail.

@jdmtb 21 күн бұрын

Worked great! No issues.

@RAI_D 21 күн бұрын

@@jdmtb awesome thanks for the info

@Bryson-zz8ju Ай бұрын

This was so cool

@VovanCBR Ай бұрын

do you really need to remove crankset on a left site? what for

@GeoffBetts Ай бұрын

Did you upgrade to the gold TRP or did your spec come with them?

@jdmtb Ай бұрын

It was a side grade. Default for that build was SRAM code ultimate stealth.

@nicoleilechie3789 Ай бұрын

Nice editing! Just rode these trails yesterday! Very fun

@jdmtb Ай бұрын

Pocahontas is definitely a top 3 in Virginia for me!

@felixchiang 2 ай бұрын

That ending brah... lol

@818suki 2 ай бұрын

swag

@JFFilmsMTB 2 ай бұрын

looks sweeeet

@joshmakintrails 2 ай бұрын

What trail is that one?

@jdmtb 2 ай бұрын

Not sure really but it’s near where copperhead and senior rock merge. We rode copperhead down from top shelf and ran right into it.

@VampireBlood1986 3 ай бұрын

Where is the park located dude?

@jdmtb 3 ай бұрын

Triangle Virginia!

@ashleidavis8309 3 ай бұрын

Sick camera work, love the close ups and the vibes

@JFFilmsMTB 3 ай бұрын

best section imo

@patxiv.2152 3 ай бұрын

Very well explained. Thanks a lot!

@peterbechtel9824 3 ай бұрын

Great event, thanks for making & posting the video, you had my attention from the Mobb Deep track, cheers

@jdmtb 3 ай бұрын

😎, Thanks and that track goes hard!

@BikingBadwithTC 3 ай бұрын

Place looks amazing, Must-Ride🤙

@jdmtb 3 ай бұрын

Biking Bad!!! Love your vids.

@BikingBadwithTC 3 ай бұрын

@@jdmtb Thx! Like yours as well, keep up the good work. We both know video editing is so much fun…😝. Lmk if you wanna do a ride together.

@JFFilmsMTB 3 ай бұрын

Absolutely sick. Glad you were out there capturing the vibes because they were immaculate. Great shots, good times.

@jdmtb 3 ай бұрын

Had a blast! Thanks to all you guys for making sure the trails were damn near perfect, and for running the event!

@toetz4491 4 ай бұрын

Just bought a new Orbea Rise... neighbor friend insists on helping change new dropper post..he ended up pulling the cable housing too much lol... ordered the Park tool Lrt 2.. . But It doesnt fit

@jdmtb 4 ай бұрын

Sorry to hear about the dropper post problem. If your Rise is newer, it may have the EP801 motor which requires a different tool. It looks like the LRT-4 will work with the EP801, but I’d validate that with park tool before buying.

@toetz4491 4 ай бұрын

@@jdmtb no it doesnt .. i ordered the TL FC430 .. but itll twke 2 weeks . The new Ep801 has a 42.mm diameter lockring

@jdmtb 4 ай бұрын

It doesn’t have an EP801?

@toetz4491 4 ай бұрын

@@jdmtb yes it does have an ep801. i meant the LRt2 doesnt work..AND the LRT4.. the new ep801 has a 42.1mm diameter

@jdmtb 4 ай бұрын

Gotcha. That’s not good cause there is a comment from park tool saying the LRT-4 should work for the EP801. Guess I’ll have to get the Shimano one if I ever get an 801 motor.

@angelffalcon3134 4 ай бұрын

pretty similar to the 2023 wild. I had to replace my dropper cable and take the motor and battery out. But now just waiting on a O ring that goes on one of those big spacers that was ripped when I took out the motor, the wild has just one big spacer tho. Thinking of buying some lights now that the battery and motor are out, hehe

@jdmtb 4 ай бұрын

@@angelffalcon3134 how do you like the Wild? I like the way the new one looks.

@angelffalcon3134 4 ай бұрын

@@jdmtb for being my second ebike after some cheap chnese one, its great, but just got it, haven't really got the chance to go riding in trails with jumps yet.

@Drofthing 4 ай бұрын

A 38 sec time improvement! 🤔 🧐 Did they crash last time or something?

@jdmtb 4 ай бұрын

I didn’t make that race so not sure. The race format is best of 2 and both of his times were within a second of each other so likely not a crash.

@kylekujala 4 ай бұрын

How long did it take to ship

@jdmtb 4 ай бұрын

Maybe a couple of days? Hard to remember 😂

@kylekujala 4 ай бұрын

@@jdmtbI have one on order and it got delayed twice☹️

@jdmtb 4 ай бұрын

I definitely didn’t have delays.

@ogwork3994 4 ай бұрын

Good

@Emtbtoday 5 ай бұрын

Legend bro! Just the video i was hoping to find on here eventually! I just got a new Cube stereo action team comes with the same as your set up amd sick of waiting for this TRP A12 to come out and had this in the back of my mind for ages will it work with the XT 12 speed and chain?! Pitty the shifter didn’t fit to the lever like the XT one does maybe a 3D printed mod can solve that at some point, anyway how has it all been working out have you had any issues with it atoll you could share? Cheers bud

@jdmtb 5 ай бұрын

No issues so far! Still had the XT chain and cassette!

@kyleazzam 5 ай бұрын

Whats you're camera set up? Where's it placed?

@jdmtb 5 ай бұрын

Insta360 x3 in that video. Upgraded to the x4 now. I mount it to the chin bar of my full face. I think it provides the best angle but not the most comfortable lol.

@ThePlantPoweredPantry 5 ай бұрын

Am I the only one that thinks this looks boring? Just switchbacks and tables? No other flow.

@jdmtb 5 ай бұрын

I don’t disagree that it’s a lot of the same. Not a lot of thinking required and I find my mind drifting while riding it, but that’s most flow trails for me. Crunchy is my favorite at Massanutten.

@krzysiu4003 5 ай бұрын

If you first loosen the 2 Allen bolts on the cranks the preload cap will come off very easily.

@Tarnman 5 ай бұрын

FYI one does not need the cassette tool for chainring removal. Just leave chain on and hold the wheel while loosening the cassette ring. And when tightening the chainring just install non driveside crank first and use that as to tighten chainring.

@jdmtb 5 ай бұрын

Thanks for the tip!

@videometanthony 5 ай бұрын

Very nice, thank you!. What is the extention tool called that u use on your torque wrench? Can't find it anywhere! Is it as also a 1/4 inch drive to 5mm hex or allen key?

@jdmtb 5 ай бұрын

It’s a long 5mm hex. My torque wrench takes screwdriver bits so it doesn’t use 1/4”. Hopefully that helps!

@videometanthony 5 ай бұрын

@@jdmtb thank you, that makes a lot of sense. I just found an adapter that works on my 1/4 inch wrench so all is good. Thanks again.

@TheMurphsShred 5 ай бұрын

Yo bro they just filled those stupid doubles in😂 but are you good my boy?

@jdmtb 5 ай бұрын

All good! That was last year lol. When did they fill them in?

@TheMurphsShred 5 ай бұрын

@@jdmtb like a month or so ago I was there when they filled them in

@ansbdnsnan 6 ай бұрын

yessir i was there

@bullit4x 6 ай бұрын

Why didn’t they run World Cup

@jdmtb 6 ай бұрын

I think it’s meant to be a bit more beginner friendly so they’re avoiding the rougher trails for now. That’s my guess.

@curtisharrison424 6 ай бұрын

Question: If they are easily removable, are they likely to pop off if the camera falls (the situation wglhere you would really need them)? The latch system seems a little unreliable, what's your opinion on that?

@jdmtb 6 ай бұрын

I don’t think it would come off very easily during a fall. Both latches would need to come undone.

@curtisharrison424 6 ай бұрын

@@jdmtb Thanks for the quick reply.👍

@broads72 6 ай бұрын

🤟

@forrestrobinson4710 6 ай бұрын

I, too, am 64 and rode this trail last week. It was a blast! This was my first single-track experience. I re-started biking about 6 years ago with a peddle assist bike but I rode this on a StumpJumper. Next time I'll take the peddle assist so I can lap it.

@nightmareanime7373 6 ай бұрын

Noice 👍🏼

@JoshTaylor 6 ай бұрын

This was one of my favorite trails for its mix of flow and mild chunk.

@jdmtb 6 ай бұрын

I think it’s my favorite basin side trail.

@forrestrobinson4710 6 ай бұрын

I'm 64 and rode it this week. Awesome! The facility is great too.

@jdmtb 6 ай бұрын

It's a great trail. Fast and fun!

@insurancemann1 6 ай бұрын

Great video. I'm planning to visit the area soon. Does Massanutten have any good tracks for beginner/intermediate riders?

@jdmtb 6 ай бұрын

The lower trails are beginner friendly but the lift at the bottom is incredibly slow and the trails are ok.

@mrgoatbeard 6 ай бұрын

Ok that looks really fun.

@stevendegreef93 6 ай бұрын

I just don't get why you didn't just pull the chain away and off the chainring in stead of destroying a chain link? (those are single use)

@normankrisher8084 7 ай бұрын

I'm pretty sure if you loosen the crank arm pinch bolts BEFORE you remove the preload screw, that screw will come out easier. Just a thought.

@jdmtb 7 ай бұрын

Yup. Learned that later.

@byelick 7 ай бұрын

Am I the only person that thinks it's rude to stop and chill in the middle of the effin trail???

@maxsteinbeezly7904 7 ай бұрын

Makin it look EASY! Dang man

@Dude-Smellmyhelmet 7 ай бұрын

This has been called grease monkey for the past couple years and this is only the top 25% or so. It gets steep and rooty but the new whistle pig connector cuts it off. Not yet sure how it will end up

@DEPIndFPV 7 ай бұрын

Hi, thanks for the video! Is it necessary to remove the chainring? I think the bolts are accessible either way.

@jdmtb 7 ай бұрын

I couldn’t get the last one on that side without removing the chain ring. Not sure if the other models or years require it though.

@fekigrejps7859 7 ай бұрын

Are there any glass protectors?

@jdmtb 7 ай бұрын

Not that I could find. The new X4 does have glass lens covers though. They make these sound like they’re made of glass by calling them “glass protectors”.

@k.d3lic 7 ай бұрын

Where did you bought Nm wrench?

@jdmtb 7 ай бұрын

I think off of Amazon, but I wouldn’t recommend it. The magnet that holds the bit in keeps falling out and I have to glue it back in each time.

@k.d3lic 7 ай бұрын

@@jdmtb do you have any other recommendations?

@jdmtb 7 ай бұрын

@@k.d3lic I haven't tried any others, but you can't go wrong with park tool.

@tatanio-y4o 7 ай бұрын

That jump you said you have to squash really creeps up on you was my first time here today and i overshot it everytime and almost went otb 2 times bc i got bucked lol

@jdmtb 7 ай бұрын

Some of them seem to send you into the bench cut too! Took me a few times to remember which ones.

@tatanio-y4o 7 ай бұрын

@@jdmtb yeah some of them seem like they give you a bit too much speed, i was probably tired though but creamy is still an awesome jumpline best one ive rode

@Stoicadvisor 7 ай бұрын

This trail used to be loam farm. They messed it up pretty bad when they cut in the new green. It used to go all the way to the lift and get gnarly. If you like this trail, you should try 4 pistons

@jdmtb 7 ай бұрын

I’ll give it a try next time I’m there!

@masonchandler6495 6 ай бұрын

Is 4 piston lift accessible

@Stoicadvisor 6 ай бұрын

@@masonchandler6495 yes. Head of trail is right at top of missing link and ball and Jack. Go under rope and it’s on your left

@esbee1 8 ай бұрын

Is this a new trail or one of the non-lift access trails?

@jdmtb 8 ай бұрын

I think it’s an older trail that starts away from the lifts. It ends on the green trail that’s on the basin side.

@Dude-Smellmyhelmet 7 ай бұрын

Starts beside Camp 4 near powder ridge. It actually been called grease monkey for a few years and this is only the top 1/4. It gets steep af

@chrisburns460 8 ай бұрын

Powder monkey!

@jdmtb 8 ай бұрын

Is that the actual name of the trail? The guy who showed it to me called it 420

@chrisburns460 8 ай бұрын

@@jdmtb yep, it follows the powder monkey slope/lift

Ең жақсы KZbin

Пікірлер