A big help! Thanks!!!

Absolutely lovely veteran's light show.

wind noise and rattling noise in the 60s rides.

Really bad video bu give me an idea of what to do.

When you did your test drive after the installation, you had the window opened. I doubt that there would be much difference in sound quality. How did the car sound with the windows up (before and after) ???? Also, since your headliner looked to be ripped up, I would have considered removing the headliner and putting the sound deadener on the inside of the roof as well. Just my thoughts.

I notice the video says a year old but I gotta tell ya after looking at a few videos you need more lighting, Barely can see anything you are showing when its not outside.

Where?

🎉looks like fun looking at alligators

Great video very helpful thank you !

Just wondering how tall you are...the top of your head is right up against the headliner. I have a 1969 Camaro and I hear road noise through the doors. That'll probably be where I start.

I have a few questions to ask you buddy. I'm gong to be setting a set on my 67 camaro. The dim wire, tach, and speed. I wonder if you can have a few minutes to explain a few things to me. I would really appreciated.

Good instructions but how about some light on the project so we can see what you did?

what was the total time approximately did it take you to install it?? and do you you want a red console??

What a sweet ride

Where did you run the ground from the HDX box?

Answer to your question…..because then they couldn’t sell you the additional piece. 😀 Getting ready to install this on my 68 Camaro w/700R4, but I’ll be using the electronic adapter.

I like Santa's hot rod firebird sleigh

Sadly from 2030 on all combustion cars including classics will be banned from public streets in entire EU and Scandinavia :-( In Germany the Green Peoples Party gave order to shorten fuel supply from 2025 on by reducing all conventional fuel stations to only one state operated central gas station per city or county. Now they want to slow down all the gas station fuel pumps from 20 litre per minute to 2 litre per minute...From 2027 on in the EU certain car spare parts will be banned too....as exhaust systems, turbo chargers and even some engine and gearbox oils...California and New York will do the same from 2027 on.... So no investments should be done in oil burning cars any longer....They even created a new kind of crime here, called emissions and smoke crime. Bundesabgasbespaßungsverbotsverordnung in German. :-(((/(/(/()/()/()/()/(

Nice firebird boss

Hey Buddy. I think you’d notice a big difference if you added sound deadening and jute padding behind you upper rear seat and window shelf to stop noise from trunk entering the cabin.

Hey me and my buddy just got into mountain biking will love to join you guys in the State Park

Great stuff! How you get the arches?

Nice car

Yeah shine it I had the same issue just my gap was 5/16

My Hughes converter says there should be 1/8 to 3/16 air gap between the torque converter and flex plate. If there is more you can use high quality washers. To achieve this spacing.

Literally skipped all the wiring lol

What about the reverse lights do they offer a super bright led for that also??

What exactly are those msd boxes even for ?

Coronavirus 🦠

Who sings this song? Quien canta está cancion

Yo en Navidad voy a cantar esta canción nosotros de papa noel

😍

It song must be santa

Alright then 2 years and holding I'll give it a try. Thanks for the reply.

Got an update on this? I'm having the same issue with a TH400 to LS3. Purchased the Advace Adapters kit 7012500A4 and a stock spec Summit toque converter neither company had a solution for me. GM's spec is 1/8 to 3/16 of an inch gap between torque converter and flex plate. So I'm thinkimg of trying these 1/4" spacers www.amazon.com/gp/product/B07D3YZ8M2/ref=ppx_yo_dt_b_asin_title_o00__o00_s00?ie=UTF8&psc=1 How did the spacers work out for your transmission? I've heard with the TH400 you can flip the pump shaft around and it will space the torque converter forward but I don't know how much that would gain, I may go that route if this didn't hold up for you.

I have been through three Monster Transmission 4L60E units in 8 months. There builds suck.

very nice sunrise ... want to come back to miami ... did you see my new videos from our florida travel ? what do you think about the sound there ?

did monster fix the issue?

the best carburetor ever pick up the box and put on a car

Ok cool thanks. I will do the same. Didnt feel comfortable with my 3/8 gap and pulling the convertor to the flex plate didnt look right then theres the potential to mess up the front pump if the converters not seated properly.

Wish I knew the answer to that question also. What did you end up doing?

without it getting to complicated, the heaver the spring the faster you need to go get to you advanced timing. the heavy springs on your car will never get there, put on lighter ones. your advance should be around 36 or 37 degrees at highway rpm. if you are not getting there at about 2500 rpm you probably need less spring tension. at least that's my understanding.

How do you determine what springs to use? I just got a MSD and it's very confusing as I dont want to damage anything, it's a mostly stock 350 in a 69 el camino...

I like those. Did you need to change the blinker?

Which color bushing n springs did u use? I got mine second hand n didn't get some stuff

Maybe I missed it but where did you gets these lights from? Send me the website. Looks good!

Thinking about sticking one of these on my '77 Oldsmobile Delta 88 with a SBC 350, I have a Summit 650 on it now, but I'm probably going to throw that on a '79 Oldsmobile Holiday 88 I have with a SBO 350. Dunno, what do you think about this carburetor after having it six months?

Im going to install the msd kit too on my engine a little later, but do you know if your engine use more fuel now with the msd ignition setup than the old one with vacum?

looks great...may have to do this on my 67

I have an edelbrock rpm and i like that manifold so far.