lol

I suggest that when you do a backup right click on the backup file in the File menu and select Download to save a copy on your PC. After an upgrade of ROS the local backup would likely be scrubbed.

In the spirit of better late than never, I'm here to say this is the only example I've found where LVL has been used for stair treads. It seems that LVL is often used for stringers, but not for treads. I see that you painted yours. We sanded, stained, and polyurethaned ours. We have a full flight of open treads and 2 partial flights with closed treads. We made all the treads and then selected the ones that looked nicest on both sides for the open treads since both the top and bottom are visible. We really like the front edge showing the laminations, the same as the tops of the closed stringers. We built and installed our stairs in the winter of 2021 while we were renovating. They've been protected with heavy brown paper during our renovations but as we're nearing the end (almost 5 years later), we've uncovered the open tread flight to the second floor and still love how they look.

How do u fix "could not resolve address upgrade"

Brill video review, thank you! 🔥

Thank you! Across multiple videos, this is the only one that worked for me!

you can't do much if you turn your hub off. but you can do everything still if you only unplug your internet

At 1:43 you say "I'm going to jump to this little web page here", but you never tell what the webpage is, nor is it in the video description.

I know this is an older video, but it still managed to help me. Thanks.

Did it exceed the 2-year lifetime of the cheaper versions?

I followed the instructions but why does the device not appear in the MQTT integration in HomeAssistant?

Totally agree !

How have these units worked out for you over the long term ?

Thank you for the vid man! Appreciate an update a year on from your last? Still recommend this waste kit?

Nice to hear the comparison 😊

Everybody please note that this video was uploaded in Winter (December) ....... In Finland. Hahaha. The first coat did all the sinking-in, this was the second coat, and took longer drying because the wood was already saturated by the first coat.

gracias from México

Love the grumpy style

If i didnt wipe enough, and now it it is sticky. What shall I do?

Thank you very helpful I just purchased this router.

Hi, bin gerade über dein video gestolpert. Kannst du sagen welche Cellulose du genau benutzt? Handelt es sich wirklich um reine Cellulose oder um modifizierte Cellulose (z.b. Methylcellulose)

Tnx man

How easy was it to install?

A delightfully whacky approach, yet still imparting exactly what I needed to know. Nice job.

You can control bulbs without a hub. You can control outside the house. I have it built into my pixel phone and can control it with google hubs too. The video didn't show me at all why an experience would be better with the hub. For me the advantage of connecting to google hub is to integrate multiple brands of devices. I am looking for a video that will explain why I should shell out more money when a google or Alexa hub can do it too. Explain the differences and how you can integrate more than just with Philips hue in a home if you so choose. Rating B- for video.

Gosh they’re nauseating. Need more footage of the place not you two

Hi Paul, I'm a ( 14 in total ) Tasmota user with node-red for over 10 years that function flawless with absolutely no issues. Been trying for maybe 6 months now to see/use them in this **** HA and to no avail. Have had may new installs of HA on various systems with the same results, HA may see and be able to use maybe one of the devices ok the rest are either show as grey'd out and marked unavailable or are nowhere to be found in HA. So thought your vid maybe the missing link, but at 2:38 in the vid I am totally lost. Remember I am a total nubee to HA as I have never as yet seen anything working in it but am seasoned user of node-red and Tasmota. Can you throw any light ( no pun ) on why this **** HA gives so much problem to some, clearly your no one the 'unfortunates' - Kind Rgds.

what if i did not wipe out

The part where you say Useless is Exactly what I’m looking for. I’m going to install a Hue light switch module on an indoor switch that controls both my porch light and garage door sconces since I have them wire together at the switch. Looks like this will perfectly work for sunset On and sunrise Off control. It requires geographical location which it should. Sunset and Sunrise times are different every day and vary by longitude and latitude. Thanks for your “Useless” commentary

Nice to see you again!

welcome back!

👋🏻

I thought only boiled linseed oil was a fire hazard due to additives. So raw linseed oil is also like that on its own? Thanks

I have a mix of both older hue and new hue bulbs. The older hue bulbs won't take the new firmware. Even though you can select it in the app settings, for the older bulbs, it will not allow “Power on State”. I'll have to relocate those bulbs out of my bedroom.

it is not a good idea to insulate with such insulation from the inside, because moisture from the room will pass through the reeds and stop in the concrete wall, and the insulation may be wet

Great video! exactly someting i am looking for to add to my temp sensors from Tuya. still some yaml code error i need to figure out, but i'll figure it out (i hope)

This is wonderful. It simply describes how to router the stringer and looking at is, it is now so intuitive. Thanks.

Groping in the dark is an art and you are an artist. Thanks to you I solved my problem!

which router would you recommend for home use? What is a good authorized seller in the USA?

There must be a better way to do that!

Thanks

Just bought one and will not detect internet.

Hi there! Can I ask why you wrap it in paper? Is it not less fire resistant like that? Why not use a plastic vapor barrier? Thanks!

hey there and thx for your great tutorial - but i got a problem....dont know why... i want to generate an offset for a govee humidity sensor....but always an error pops up: template: - sensor: - name: "Govee_with_Offset“ unit_of_measurement: "°C" state:> {% set govee = states('sensor.h5179_f058_humidity') | float %} {% set offset = states('sensor.goveeoffsethumidity') | float %} {{ (govee*offset)}} Error is: "can not read a block mapping entry; a multiline key may not be an implicit key" I created the template sensor "Govee_with_Offset" and another one "GoveeOffsetHumidity" The entity card I created isnt changable too - I have to set a Conditiontemplate and when I imput "1" there is stand 1% ?! Sorry for dumb question but this is my first time doing this :-9 Maybe you can help me here...

Best to overkill than under kill & collapses . I'm not sure if you screwed or bolted the top & bottom steel plates of the prop so it doesn't accidentally move.

What cartridges did you use?

The more magnetic with in the speaker the better in my head. Thank you for the review.

Yeah running out of staples in the middle of a job .. I had that happen a few times building fences, and it really spoils the flow of work.

There's a story in a bloke with your accent working on a house in Finland. Isn't that about as far away from home as you can get without leaving the planet?

Looking for info about suitable products for a van build project. How are you enjoying your wool now?