Thanks so much for these vids. So helpful for those of us just starting out. Subscribed 🎉

thank you so much for doing this video....best one ever on thingiverse model modding...

hello Jared! I tried to load the nextion HMI file and adjust it to my device, which is a 3.5 inch discovery series. But, when i adjust it because your 7 inch display was in a big format, the buttons are outside the range and after i resized it the output window prompt told me that there's an error of the buttons are out of range. I'm sorry i never deal with HMI display, maybe u could help?

Excellent video, but I have a question: how do you wire a different stepper driver, in my case a DM542T. The rest of the components are the same. Thanks

Very insightful. You mentioned you have posted another video using a micro controller. What would you say are the pros and cons of using a micro controller vs a PLC for a project like this? Thank you.

The mesh option is no loner available under Solids Tab>Modify

I do not have a Drop-down Mesh option I'm on Free Fusion

you are the dopest

Great video... thank you for sharing

I'm using the Free version of Fusion 360... when I go to convert mesh to BREP, I don't have the Mesh option in my Solid/Modify drop down list. Any idea why?

people like you are the greatest ...thank you for the info

Good and straight to the point, thanks.

How do u print/pdf when done on the free version?

surface merge menu is gone?

These are nice features, but, unfortunately autodesk keeps removing features for the free license

Like your videos -easy to follow - Under Modify i don't show a mesh or a mesh to brep - can you tell me where this might be located

Thanks a ton… I’ve been looking for a simple explanation for how to do this for a while

Grate Content. Verry useful

yo jared... your fire bro. Trust me, continue creating content and start busting jokes here and there for comic relief, and your channel will explode. You offer amazing value

You really have to work on your audio quality... Your volume is much too low...

This was very helpful. I would like to see more about how curved faces can be changed from the stl version into the new model. the two videos I have watched of yours you only dealt with flat faces and only the parts of the original model that you wanted to modify. That was very helpful because I kept thinking I would need to change the entire model to be contained in the model I was working with NOT just the part I was going to change. After you demonstrated how you did this it made total sense so thank you for taking the time to share this. Also, if you do have a video on how to convert curved faces i'd be interested in watching - please share which video you recommend on this.

How do you get the sketch up file to fusion 360 to begin with ?

what about a command line method?

merge looks like its gone now in the current version of Fusion. Bummer. I think its stitch now but it doesnt seem to work like merge did.

I've got Fusion 360 personal (the free one) and it only gives me the option to save as mesh, not STL. Have they changed this and locked it behind the paywall?

I can't seem to find Mesh to BREP at all in the latest version

Hola Jared, estoy tratando de implementar tu código a mi actuador lineal de husillo de la firma FUYU de 500mm de recorrido con dos limitadores de recorrido en los extremos. El fin es hacer subir una camara de fotos con paradas cada cierto intervalo de tiempo mientras que una plataforma horizontal con otro motor paso a paso realiza un giro completo con paradas a intervalos fijados y disparo de fotos, unas 32 fotos por giro. En mi actuador lineal he colocado una plataforma para colocar una cámara de fotos y el disparo lo hago mediante un relé opto-acoplado👍👍👍. El objetivo de todo el sistema es el de obtener conjuntos de fotos de un objeto formando grupos de fotos agrupados en anillos concentricos para posteriormente calcular un modelo 3D de alta definición. ¿Seria posible disponer de un poco mas de detalle de las conexiones de los pines de tu aplicación. Para mi, tu software es un medio, no soy un experto en programación con Arduino. Muchas gracias.👍

Thanks for a different process for doing this conversion. I'm self-learning F360, others have said to use the insert for getting the sty file onto the canvas. I will have to go at it both ways to see which works better for me. I really wish they had a version for personal use that had a few extra features like the prismatic and more than 10 files at a time.

Hello Jared Hanson, can you help me with a software-related matter? I want to create a project. In my project, I will be using a Nextion TFT screen, Arduino Uno, Green LED, Blue LED, DC motor driver, and DC motor components. In addition, I will use one yellow button and one red button. The program's operation is as follows: I will input a value, such as 5000 milliseconds, into the "n0" object on the Nextion screen. I will also enter a value between 0 and 255 into the "n1" object, which will be related to the motor's speed. Based on these values, the motor will run between 0 and 255 revolutions for 5000 milliseconds and then stop. After entering these values, to start the program, the "b0" object on the Nextion screen and the Arduino, connected to the analog "pin1" yellow button, will serve the same function. Whenever the analog "pin1" button or "b0" object is pressed, the motor will start running again and stop when pressed again. In case of an emergency while the motor is running, there will be a red button connected to analog "pin2" to stop the motor. When the "pin2" button is pressed, the running program will stop immediately, and the green LED will turn off. To restart the program, we will need to press the "Dual State Button" button. All of this system will be controlled by the "dual state button" object on the Nextion screen. When the dual-state button is open, the system will be ready to run, and the position of the dual-state button will be indicated by the green LED connected to digital "pin 12". I want to create a project that operates in this way. What is the cost of such a project?

IS THERE A MORE CURRENT EXAMPLE OF THIS PROCESS? Tried this process and I get no pink file on upload. thanks sorry about the caps.

Hi Pls advise i am looking for Nextion.h file?

The comand MERGE is gone!! 😵‍💫 I can't find it in new versions of Fusion

well explained , thank you!

Hmmm.... at 6:31 I don't have a Mesh option in that menu?

excelente muy buen trabajo

Hello Jared thanks for this great video and explanation. I've used this code and it is very user friendly. Great work as always.👍

Thanks!

when I upload and open the file opens still as "pink" not dark grey. and with that.. I cant see either Solid--->modify--->mesh OR after that.. surface---> merge... did they took that off in these 2 years?? btw using free version is it coz of that?

Great video! What kind of material ABS or resina?

I needed your convert stl to obj, needed it for a projector. Thanks for the help.

I came for that merging part but my fusion does not have the merging option

this has minor changes... like having to select two different types of STL files, none of wich i cant seem to open on Shapr3D... any tips for this?

Is this better than tinker cad and easier?

It is possible to convert with textures? I have OBJ object with textures, but when I convert to .STL and open in Maya, i can't see it.

This actually brought me back the real reason why i should've purchased few of those scrap tablets from fleamarket. And actually, if you do "the superlong video", i would suggest that you split it to few parts (to include some learningpoints), and in the end just do last one to be collab of those (so 5 parts and 6 videos altogether). Thank you for this and always up to videos like this!

was trying to follow with you, but after doing all the previous steps till ,modify mesh, my "mesh " option under modify is not there, my last option is "convert" instead, help?

This was great!

Thanks for the video. What about .mtl files? EasyEDA exports all 3d objects in one shot as a zip archive that contains .mtl and .obj and sounds like .obj needs something from .mtl?

Thanks for the video! I have a project where I need to run 4 seperate Neopixel strings from a single RaspberryPi, Is this even possible as I see many people saying you can only run 1. Thanks! all advice welcome as I'm a bit stumped at the moment. The reason why I need to run 4 is each string will be removable and have different options available for selection.