Black Diamond Sandblasting

Пікірлер

@RJ1999x 12 күн бұрын

Is it just the angle of the camera, or are you holding the nozzle a few feet back of the material?

@ELECTRICMESSIAH420 11 күн бұрын

from my experience sand blasting with a similar set up, he's likely no more then 2-3ft away from the material , anymore and the pattern spreads too much . think of it like a shot gun pellet blast

@RJ1999x 11 күн бұрын

@ELECTRICMESSIAH420 we have a big blaster, I'm thinking we might run too close

@ELECTRICMESSIAH420 11 күн бұрын

@@RJ1999x oh okay yah I don't know all that much I was mostly sand blasting some tanks/pressure vessels

@RJ1999x 11 күн бұрын

@@ELECTRICMESSIAH420 we bought it for tractors and farm equipment, it works great, but don't have much experience with these big units

@BlackDiamondSandblasting 11 күн бұрын

He is correct your about 2-3 feet away to keep a steady pattern! If you go too far it doesn’t have enough power and when too close it’s hard to keep it even! One major factor is how big your compressor is! The smaller it is the closer you have to be.

@Mopar66-is1ws Ай бұрын

That’s a 69 fastback

@Brittany-vl6xs Ай бұрын

Loved my time in the sand blasting room. Theraputic.

@slh48 Ай бұрын

Are you using a titan sprayer or Craco sprayer

@BlackDiamondSandblasting Ай бұрын

Graco is the way to go if your using oil based

@JonahBennett-u6j Ай бұрын

He missed a spot 😂

@BlackDiamondSandblasting Ай бұрын

Good eye!!!

@paulipuhakka8788 Ай бұрын

@@BlackDiamondSandblasting what’s a job without someone having to throw that in! I did a lot of final inspections of the blast, and three coatings, and they all have to say, “missed a spot”😳 Two for flinching!

@paulipuhakka8788 Ай бұрын

@@JonahBennett-u6j It has to be said doesn’t it! Two for flinching!!!!

@paulipuhakka8788 Ай бұрын

Nice clean blast 👍😎💪

@BlackDiamondSandblasting Ай бұрын

Thanks ✌

@paulipuhakka8788 Ай бұрын

@ I’ve been a blaster since the early nineties, and I know a good clean blast when I see one👍😎 Cheers 🍻to a fellow blaster!

@Philly_Gamer Ай бұрын

Mustangs have air suspension and dualies...since when?!?

@BlackDiamondSandblasting Ай бұрын

Haha since when agreed

@davidbowser2395 Ай бұрын

10.00 x 20 is the same as 22.5 for just converted to radials compared from being nylon/ bias ply. But you run tubeless rims but can still run radials on those rims with tubes too.

@BlackDiamondSandblasting Ай бұрын

Thanks for the info!

@ElfCrotchPuncher Ай бұрын

700 dollar shop you pay a few grand for. Rip off

@Frout_4 Ай бұрын

ЛЕТНИ.ДУШ.МАШАЛА😂🎉

@TheCraigaharris 2 ай бұрын

Asmr 😵‍💫

@ianpatterson3061 2 ай бұрын

You hiring?

@BlackDiamondSandblasting Ай бұрын

Not at the moment

@ianpatterson3061 Ай бұрын

@@BlackDiamondSandblasting 30,000 hour industrial spray painter here, did lots of shot n peen blasting

@atracamoniusvlogs 2 ай бұрын

379's a al barsha 3

@c.jwilliamson9247 2 ай бұрын

Hi there … how you got to be glossy ..thinking of doing the raptor liner on my Nissan Titan 2018 wanna start with from bumper to see

@BlackDiamondSandblasting 2 ай бұрын

Take a look at my video I one how to do it!

@matthewridgeway9250 2 ай бұрын

Mack never made a wagon. Make it the first passenger vehicle. Follow the stule of the sides all the way to the back!

@matthewridgeway9250 2 ай бұрын

Paint it Soul Red Mica. It is a Mazda color and it looks fantastic!

@BlackDiamondSandblasting 2 ай бұрын

I’ll have to take a look at that color

@Sasskin 2 ай бұрын

i don't understand where, when did you put epoxy primer?

@BlackDiamondSandblasting 2 ай бұрын

2:10 mark, the epoxy is white also.

@JeffRobertson-m7v 2 ай бұрын

More orange peel than a Tropicana juicing plant.

@BlackDiamondSandblasting 2 ай бұрын

Just the way I like it!

@onlyyours725 2 ай бұрын

I bought a house where someone painted a bedroom cherry red high gloss. It peeled off the walls the exact same way. Well, except where there were nail holes before they painted. I had to sand that shit off! 😂

@BlackDiamondSandblasting 2 ай бұрын

Sounds terrible how you sand latex paint though?

@onlyyours725 2 ай бұрын

@@BlackDiamondSandblasting wasn't latex. 120 grit sand paper.

@BlackDiamondSandblasting 2 ай бұрын

@@onlyyours725 sounds like a terrible job.

@KevTheHunter1 2 ай бұрын

Clean 🧼

@BlackDiamondSandblasting 2 ай бұрын

Thank you

@goldysgarage189 2 ай бұрын

Is often best to remove the tape while the paint is wet

@BlackDiamondSandblasting 2 ай бұрын

Makes a better line forsure, tape doesn’t rip as much either.

@bertgrau3934 2 ай бұрын

Now that brings back some memories. I drove one of those, it had a 237 horsepower Mack. That engine wasn't supposed to come out until 67, but I don't know how the truck I drove got the newer engine. Maybe someone replaced the original. It had the Quadraplex. 5 X 4. One rough riding truck, but very dependable. I was easy on it because i was told the transmission couldn't take all the torque of the engine.

@BlackDiamondSandblasting 2 ай бұрын

👍👍

@BrollBrothersProductions 2 ай бұрын

What is that paper called?

@BlackDiamondSandblasting 2 ай бұрын

Masking paper, we use fastline.

@BrollBrothersProductions 2 ай бұрын

@@BlackDiamondSandblasting thanks

@jonathanwiltshire9867 2 ай бұрын

I hope it’s grounded 😮

@BlackDiamondSandblasting 2 ай бұрын

Sure was!

@ZhenHuang-r8m 2 ай бұрын

Hi, this is Ellie from China Henglihong Technology, we are specialized in the manufacturing of Sandblasting media for 23 years. Please feel free to contact us to get product catalog and the latest price!

@brucegogo198 2 ай бұрын

Are you guys hiring?

@BlackDiamondSandblasting 2 ай бұрын

We are not currently

@user-rs1990 2 ай бұрын

The 5th Wheel I see is an early Fontaine! The prime mover from Knight Rider's last two seasons has a much similar one that works in the same manner.

@BlackDiamondSandblasting 2 ай бұрын

Did not know that. Good to know for the future!

@RoyeBernal-z4h 3 ай бұрын

What type of mills?

@BlackDiamondSandblasting 2 ай бұрын

I believe it was 8-10 mills

@DevranKaya-j1n 3 ай бұрын

Mack the best of the world beautiful 👍🏽👍🏽

@BlackDiamondSandblasting 3 ай бұрын

Sure is!

@bengrooms7694 3 ай бұрын

Thank you for posting this I’ve been trying all day to get them off so I can replace with my business logo ! Thank you ! 😁

@BlackDiamondSandblasting 3 ай бұрын

No problem glad I could help!!

@jamesanderson5243 3 ай бұрын

So when the frame breaks where the holes are ..... let us know....

@BlackDiamondSandblasting 3 ай бұрын

Hopefully that doesn’t happen but I will let you know if I hear anything.

@albertozavala6570 3 ай бұрын

I’m planning on doing this in my w9. Got a couple questions, would it hurt the air lines or electrical wires or air bags? What’s the average price for a job like this ?

@BlackDiamondSandblasting 3 ай бұрын

As long as you don’t hit them too much. 4-5k

@Sasskin 3 ай бұрын

what a turd

@ericmhinkle6003 4 ай бұрын

Yes I would completely restore this truck ,from the ground up because it is an historic vechicle

@BlackDiamondSandblasting 3 ай бұрын

Very good point! I really appreciate the feedback back!

@MrMustachieo 4 ай бұрын

Ugh.. sign😊 me up..

@andrelourenco2071 4 ай бұрын

Man where the hell are you?

@BlackDiamondSandblasting 4 ай бұрын

Regina, Saskatchewan

@ImSimplyChilling 4 ай бұрын

That’s awesome I’ve only seen small scale contained sand blasting but you got a mobile setup, badass!

@BlackDiamondSandblasting 4 ай бұрын

Thank you!!

@andrewmasonwerdna 4 ай бұрын

Man what's hourly on renting someone like that? Really should just Get everything I own cleaned lol, I live in the snow belt in Canada Ontario Hahaha means salt...

@BlackDiamondSandblasting 4 ай бұрын

We don’t rent out equipment! Yea I have heard it bad down there. It’s bad enough here.

@matthewanderson3631 4 ай бұрын

You making it shinny 😂🤷🏻‍♂️

@andrewmasonwerdna 4 ай бұрын

@@matthewanderson3631 turning everything into a delorian I guess! Hahaha

@nfprojectshop 4 ай бұрын

lol I thought the beginning was an after shot! Nice work👍

@BlackDiamondSandblasting 4 ай бұрын

Thank you very much!

@PeytonGoebel 4 ай бұрын

What media do you use

@BlackDiamondSandblasting 4 ай бұрын

Sand

@sullivanlawn3130 4 ай бұрын

How much does something like that cost?

@BlackDiamondSandblasting 4 ай бұрын

4-5 by the time you paint it.

@bwilliams463 4 ай бұрын

Looks like a long wheelbase for a single. Did it come from the factory that way, or was it possibly shortened from a twin screw?

@BlackDiamondSandblasting 4 ай бұрын

That is factory.

@badzbradzgoodyz6477 4 ай бұрын

I don't know much about Mack trucks, but I buy one that has a tandem rear end. It's an R model, but I'm not sure of the year. Seriel number is R686ST35028. Would the 68 in seriel number the model year? The truck looks like the one that you have. Good luck on your project. It all takes time, but I never find enough time to get any of my projects done.

@JeronWhite 4 ай бұрын

Get-go get it outside Dun chains to get the breaks done, rangston Van. You can do the inside of the truck last but you need to get them breaks on your need to get them priced into peace and metal plate play. You need the gift change, make it your other rear end. Get that we're in get you some breaks. See some decent airbreaks on it. You need airbreaks get some air breaks on yourself from handsome

@JeronWhite 4 ай бұрын

Yes

@JeronWhite 4 ай бұрын

News set up new brakes, new everything. You can drive a truck like that new brakes.

@JeronWhite 4 ай бұрын

Get news daily in there because you're gonna have to get new staring. You gotta get new steering and stuff if it's hard to steer, you'll have to get the news to turn them box everything it's look for another Mac. I knew a Mac and put the taking painting guts out of the air and put all new stuff up in there. It's worth it, you gotta do a cheap. Just go and replace all the new stuff in there. Because if it's hard you said it's harder to drive like that now. Replay song of the stuff little by little

@JeronWhite 4 ай бұрын

2 tons get that get you some numb new lines and stuff. Put a radio in there set alarm for 5 set puppy oil cleaned up you can. You can take those dictators when sticks out you change engine and stuff put a brand new comes in there. May go to if you wanna go to eat and Fuller, go to eating food or change all that change all that stuff out, change all this FI get on, you get new seats. Forget reply, just get on new seats go find another truck report another Mat. Can you see Saturday for UP to run that clean up puppy out for furnace it get your new plate put on the back of that. Could you get your new plate if you're gonna sit in head off or get you from Steff, you need a grease that faith will get a freeze will grease get a new faith will and get some lights in the back of that LA d's LED s for the front in front. Don't burn everything else, let's say, i'd take that truck. I'd have them, we do that whole truck, are you stupid from the end and out? Get them twins stakes, we go on a we go into one staff we're going to I gotta go to a 15 speed or an 18 speed pin speed. I need ninety, some power and Stefan there. That's a good truck. Good project truck should be set for part out of your taken hood off. Do not soccer blasted, put new equipment drop nailing United air. Taking all the stuff out cleaning it up

@JeronWhite 4 ай бұрын

You can put a new engine

@JeronWhite 4 ай бұрын

New rear end, a new comings Indian put new seats in there. Put a nice nap around here but a headache. Crack in the back. Cut that old. What's it called it off? I didn't put a doom on there😊😊

Ең жақсы KZbin

Пікірлер