Unfortunately they are being discontinued so I don’t think they will make milled slides
@carreteras1014 күн бұрын
thank you for the helpful video.
@BRLaue26 күн бұрын
Why not? Because the civilian market isn’t their biggest customer base.
@dg867629 күн бұрын
How did you get the optics on there?
@imstuner29 күн бұрын
You would need to send the slide out somewhere and get the slide cut.
@creed42629 күн бұрын
"Great video! I have a question: after more than five years, which option would you recommend as the best? My only concern is that my bike doesn’t have spools on the front or back. Thanks!"
@imstuner29 күн бұрын
I’m only down to one bike now and kept the Woodcraft one. Both of them are great stand but like the woodcraft one just a little bit more. The axle holders come standard and you have height adjustment. I would install spoolers if you can. Pitbull can lift either by frame or spoolers but the woodcraft you have to pick the life attachment when you order.
@creed42629 күн бұрын
@@imstuner thank you for your quick response, stay safe.
@randytidmore8021Ай бұрын
The first one comes in titanium gray
@rogereastwoodАй бұрын
Just the video I was looking for! I just bought a p2000sk v3 (like you - I'm not a trigger snob, but might think about sending it in for a lighter pull if I'm really having trouble) and have a holosun eps (didn't want the carry version since my eyesight isn't the greatest and the slightly larger window on the eps suits me). You said you'd get the optics cut somewhere else - do you mind sharing where that would be? thanks for the video!
@imstunerАй бұрын
I would contact impact machine instagram.com/p/C5Hx3mprctD/?igsh=MXJkazhvODl2cGs3bQ== or Wright armory in FL. Impact machine mills a direct mount and wright armory makes a plate system. I hope this helps and if you have any questions please ask away.
@rogereastwoodАй бұрын
@@imstuner Thx for that! One other question: if I did want a slightly less heavy DA trigger pull, would there be a place that could do that? I saw that Lazy Wolf guns is being pumped by teufelshund tactical and their ridiculous trigger package which is $450 (I might as well buy the v2 and still save a few hundred $$ for those prices!
@imstuner22 сағат бұрын
@@rogereastwood I haven't really look into it but if you get anything done please let me know.
@guacamoleweiner69Ай бұрын
I work on heavy equipment like 657g scrapers. I have sunex 1/4 to 1 drive sockets metric and standard. They are awesome
@JonnyParker-Ай бұрын
So fkin nice
@michaeltomasino3053Ай бұрын
I love these pens I have 4
@tamichealjonessrАй бұрын
Are you able to co witness on both guns?
@WantedDeadАй бұрын
yes
@tamichealjonessrАй бұрын
@@WantedDead thank you
@DanLenaghan2 ай бұрын
What iron sights are those?
@imstuner2 ай бұрын
I believed they installed Dawson blacked out sights. Call Dawson and make sure which ones fits because the p2000 does not fit on the P2000sk. dawsonprecision.com/
@cheriebrewster70402 ай бұрын
To be honest, I'd like to see this in 10mm. I doubt it. But it would be nice.
@imstuner2 ай бұрын
I would definitely pick up a 10mm model if they made one with a comp.
@WettDoggTV2 ай бұрын
With the Holosun EPS carry work with in this? Its my favorite optic, but all im seeing is people putting the scs
@imstuner2 ай бұрын
You will need to use the plates that come with the pistol.
@NandiniMukherjee-g3q2 ай бұрын
Love u puppy
@anthonydiaz57272 ай бұрын
Would the SCS MP2 mount directly to the compact/polymer carry comp as well?
@imstuner2 ай бұрын
The SCS-MP2-GR (Solar Charging Sight) is designed for the Smith & Wesson M&P-M2.0 full size, 9mm & 40S&W handguns (will not fit 1.0 or Shield models).
@anthonydiaz57272 ай бұрын
@@imstuner so it should work since the compact is an M&P 9mm, right?
@imstuner2 ай бұрын
@@anthonydiaz5727 Give me the actual URL from SW site.
@anthonydiaz57272 ай бұрын
@@imstuner I actually found out that it will fit a compact as well from a site selling the scs. I appreciate your video!
@2bcont1nued2 ай бұрын
@@anthonydiaz5727they’re the same gun just different grip
@jameshall18712 ай бұрын
Is this the Halosun SCS MP2 optic on your new M&P?
@imstuner2 ай бұрын
Yes direct fit.
@jameshall18712 ай бұрын
@@imstuner thanks!
@efaulk812 ай бұрын
Does this optics co-witness with the irons sights ?
@imstuner2 ай бұрын
Yes you can but barley doing it.
@nalsra02 ай бұрын
I hope they make a metal carry comp and shield plus
@WTGBalla2 ай бұрын
They do….they have a metal frame carry comp which is a full frame. They have a polymer compact frame carry comp. And they have a shield version of the carry comp as well
@03Memito2 ай бұрын
@@WTGBallawhat he’s saying is he hopes they make a Metal Compact Frame carry comp and a metal Shield Carry comp
@nalsra02 ай бұрын
@@WTGBalla Yeah but the metal one is full sized, there’s no metal carry comp or metal shield plus. They should make a metal carry comp and metal shield plus is what I’m saying
@nalsra02 ай бұрын
@@WTGBalla Whoops I meant I hope they make a Metal compact carry comp. Not the full sized.
@NinjaBlasterPhoenix2 ай бұрын
Super sick 🥷💥🐦🔥
@imstuner2 ай бұрын
Thanks
@kevinudarbe59403 ай бұрын
I reccomend ANR design holster I carry a p2000 with a light and the same optic you have
@imstuner3 ай бұрын
ANR do make some nice holsters. I have ANR for my PDP and G19. I wished they made one for the P2000sk as well.
@goobasippay9383 ай бұрын
Definatley recommend wright armory. I have a p2000 in ODG that im trying to get rid of. I like usp better
@sufu__3 ай бұрын
p2000s are getting discontinued lol, unlikely we would ever get a slide cut
@keatonjorgensen87932 ай бұрын
Pretty sure that is a internet rumor that's been circulating for a decade now.. If you can point us to a source please do. I see them locally for sale and online as well
@dg867629 күн бұрын
@@keatonjorgensen8793I went to the gun shop today and they said they were going to phase them out. That means you still have like a year before they get hard to find.
@Unwitnessed3 ай бұрын
What iron sights are those? Looks like 1 to 1 cowitness.
@imstuner3 ай бұрын
I purchased them through Weapon dynamics as well.
@jamaicanjjason3 ай бұрын
Looks great!
@MrNiceKnife4 ай бұрын
Get any range time in?
@imstuner3 ай бұрын
It's been one of my regular edc pistol and I love the p2000 with optics. kzbin.info/www/bejne/bajIfaCjeNtsfbc crappy feedback video.
@meguhhman4 ай бұрын
Where did you get your slide?
@imstuner4 ай бұрын
I got the slide cut from dynamicweaponsolutions.com but I would suggest getting it done from impactcncmachine.com/hk-p2000sk/ or wrightarmory.com/ instead.
@meguhhman4 ай бұрын
@@imstuneri appreciate the recommendation. But did you buy a brand new slide? I don’t want to use my factory slide. I have been looking to purchase one for my p2000sk
@imstuner4 ай бұрын
Nope, purchased 2 New HK pistols and sent the side off to be cut. You can buy the slide alone but they are like 400 bucks for a stripped slide and it cost half the price of the p2000.
@meguhhman4 ай бұрын
@@imstunergot it, thank you for the info
@honda636hp4 ай бұрын
Is this coil have IGF wire?
@mousec26005 ай бұрын
This video is foolish. Your gripes are petty and exaggerated. The Groove Wallet is a wholly high quality product and your contradictory silliness was pointless and irritating.
@imstuner5 ай бұрын
My opinion has not changed and the sliding panel should have some grip texture on it. If it works for you than great.
@mousec26005 ай бұрын
@@imstuner Which ones? You expressed a wide range of contradictory opinions within the video. If they're all still the same *_then_* it's all still nonsense.
@adalbertorodulfovillalobos3495 ай бұрын
Nice, thanks for the video man, can you tell me what suppressor sights are those on the P2000?
@imstuner5 ай бұрын
Pretty sure it was from dawsonprecision.com/ but i'll check my paper work.
@robglaser35 ай бұрын
Don't bother trying to buy Woodcraft stands for your motorcycle. They apparently can't make them anymore. They took my order and money in early March and kept stringing me along with changing delivery dates. I called them again yesterday and they basically said they don't even have a guess when they will be able to make them. So if you actually need stand(s), best to get them from someone else.
@imstuner5 ай бұрын
I'm sorry to hear this and hope everything gets sorted out for you.
@gpeaes4 ай бұрын
My rear stand shipped from Revzilla today and it looks like on their website both will be back in stock this month. Did you end up getting another brand?
@robglaser34 ай бұрын
@@gpeaes I went with Pitbull front and rear stands, couldn't be happier with them. Will never buy any Woodcraft products after the way they handled my first attempted order from them. Completely unprofessional company in my opinion.
@DavidV44445 ай бұрын
I love my pen and bought it specifically for the Fisher insert / I only use Fisher button is just awesome!
@RAND0MHERO5 ай бұрын
Just curious how you feel about your P2000 9 months later? I just communicated with DWS owner via their website and he projected a 4-6 week lead time, I'm still not sold on them considering all the poor reviews I've read.
@imstuner5 ай бұрын
I would look at impactcncmachine.com/hk-p2000sk/ and wright armory.
@ChrisPatrick-q6k5 ай бұрын
Nice video, thanks
@leandronegreti-ef1sl5 ай бұрын
Q lindo😂😂
@ellieprice3636 ай бұрын
I just ordered a 5C just like it. “Made in United States” is right on the box. Looks genuine but the box color a little different from the original Starrett design and “Made in United States” instead of “Made in USA” makes me a little bit suspicious.
@J-ot1yh6 ай бұрын
NEVER EVER GO TO DYNAMIC WEAPON SOLUTIONS in Huntington Beach CA
@imstuner6 ай бұрын
Yeah I would totally agree!
@Fucknuts4u6 ай бұрын
Stop using cocaine.
@KingDrewPhilip7 ай бұрын
Gates is pretty good? I ask because I done my research and they make water pumps that are apparently as good as the OEM ones. I tend to only go for OEM as part of me thinks anything after market will last only half as long or less as OEM, but I can expect the same quality and reliability with Gates? Maybe I worry too much lol.
@ChrisPatrick-q6k5 ай бұрын
OEM,
@KingDrewPhilip5 ай бұрын
@@ChrisPatrick-q6k OEM or else your car will meet an early demise
@aterack8337 ай бұрын
Did this guy just say “bofa deez” or is that the American accent?
@Snowmannorth9 ай бұрын
These wrenches are a 216 position ratcheting end. Yes, 72 teeth with 4 separate pawls.
@billbonu16399 ай бұрын
My fjr, which is kinda like an r1, started ticking and drove me nuts.finally tracked it down to low oil pressure.apparently some Yamaha inline four cylinders have 4 psi oil pressure at idle from the factory which requires the freeest flowing filter and just the right oil.my bike with a wix filter and rotella t6 will tick you to death.same bike with a super tech Walmart filter and Valvoline synthetic 10w40 barely makes a sound.thats why they stop ticking above 3000 rpm,by then you have enough oil pressure to push it through the filter and get to the top of the motor.tinker with different oils and filters until you find the one it likes and keep your rpms up a little bit when cruising around town.problem solved.
@KeokiDude10 ай бұрын
Bro, we need an update video please 🙏 😊
@imstuner6 ай бұрын
I get it up by next week.
@imstuner3 ай бұрын
kzbin.info/www/bejne/bajIfaCjeNtsfbc Here's the crappy feedback video.
@Cw-iq7vt10 ай бұрын
So cute❤
@SOMNIOHM Жыл бұрын
*_Uni Power Tank Smart Series High Grade Ballpoint Pen Refill - These should fit just fine!_*
@imstuner Жыл бұрын
I’m going to give it a try. Thanks
@bajadan2769 Жыл бұрын
how do they come up with these brand names- fn " genious"
@albertptran Жыл бұрын
Nice
@spruce2367 Жыл бұрын
Dynamic Wep. Solutions in Huntington Beach is trash.
@imstuner Жыл бұрын
Yeah it's going to be a hit or miss.
@SolDarkside Жыл бұрын
How's it holding up for you? I'm looking to get mine milled and am hesitant to pay for the iDot.
@imstuner Жыл бұрын
Good so far without any issues. I would look at some of the impactcncmachine.com/hk-p2000sk/ work. That have some really nice milled pics on instagram for the p2000/SK
@SolDarkside Жыл бұрын
@@imstuner Thank you for the recommendation. I went ahead and ordered a cut from them with DLC. let's see how this goes.
@imstuner Жыл бұрын
@@SolDarkside let me know when you get it back and pls do a video if you can.
@SHLENON1 Жыл бұрын
Is the Dayco water pump as reliable as the Gates?
@imstuner Жыл бұрын
Sorry never used a Dayco one.
@ChrisPatrick-q6k5 ай бұрын
From my experience Dayco isn't what they used to be.