Nicole’s Crafty Creations

Пікірлер

@naomishearer2278 27 күн бұрын

i tried with htv from htvront but keep getting bubbles between the htv and fabric..please can you advies? had my temp 200c pressed for 20sec cold peeled htv then pressed image for 50 sec

@nicolescraftycreations 25 күн бұрын

Try taking the temp up. With my pressed the HTV at 380 for 10 sec and then pressed the design for 40 sec

@213mija 2 ай бұрын

We’re do you purchase your images for the bows?

@nicolescraftycreations 2 ай бұрын

The image I pressed on the ribbon? From Etsy

@mariewoods6798 4 ай бұрын

Stop with the music please

@AnaGonzalez-ex5cl 6 ай бұрын

I did everything have the same machine and it just does not transfer vibrant it's all dull, please help. Could it be my pressure?

@nicolescraftycreations 6 ай бұрын

I did medium pressures. You may to adjust the temp and time. Try adjusting it by a few seconds

@moonequestrian9670 7 ай бұрын

Yes, please

@nicolescraftycreations 7 ай бұрын

I posted a full video on my channel, here is the link kzbin.info/www/bejne/aIWkn3-GnNChndUsi=rEJSySLq8ZOFp8o5

@Desertphile 11 ай бұрын

Thank you.

@nicolescraftycreations 11 ай бұрын

You're welcome!

@Lamaypawh Жыл бұрын

🎉❤

@rebajackson1077 Жыл бұрын

Maybe you need to wait for it to cool a bit before peeling it off

@brankalipar6146 Жыл бұрын

And what is the temperature and time for canvas?

@nicolescraftycreations Жыл бұрын

Temp 380 for 60 seconds

@dancing.with.adagio Жыл бұрын

Yes please!!

@nicolescraftycreations Жыл бұрын

Once I put the video together I will let you know. Thank you 😊

@Kenna_eq 7 ай бұрын

@@nicolescraftycreationsdid you make a video yet??

@nicolescraftycreations 7 ай бұрын

@@Kenna_eq here is the link. It is posted on my KZbin channel. kzbin.info/www/bejne/aIWkn3-GnNChndUsi=kEKkDDK4y4u3nrWz

@nicolescraftycreations 7 ай бұрын

kzbin.info/www/bejne/aIWkn3-GnNChndUsi=C_HAH0SzMMoSxmZ3

@Kenna_eq 7 ай бұрын

@@nicolescraftycreations thank you so much! Very helpful ❤️

@michelefrost734 Жыл бұрын

These are adorable, haven't seen this design before. Thanks!

@nicolescraftycreations Жыл бұрын

Thank you. They are so easy to make and you can customize your own ribbon by sublimation.

@agreenheart01 Жыл бұрын

how did you print your ribbon? Did you do HTV or sublimation?

@nicolescraftycreations Жыл бұрын

Sublimation but you could use HTV

@agreenheart01 Жыл бұрын

Thank you! I’ll give it a try.

@joachimhorey2490 Жыл бұрын

😉 promo sm

@sharondixon9137 Жыл бұрын

Are you using sublimation ink

@nicolescraftycreations Жыл бұрын

Yes

@elainedaniels1081 Жыл бұрын

What is the point if you aren’t going to say something?

@nicolescraftycreations Жыл бұрын

Hi Elaine, This video was to just to show some sublimation ceramic ornaments I made. I would be happy to answer any questions you may have?

@debbi2962 Жыл бұрын

How long and at what temperature do you use to do your ornaments? I have the same press.

@nicolescraftycreations Жыл бұрын

400 for 3 minutes

@debbi2962 Жыл бұрын

@@nicolescraftycreations THANK YOU! So much! That is absolutely the sweet spot.

@oliverwjones 2 жыл бұрын

When heat pressing ceramics and glass, it takes a LOT longer than usual. Conde recommends 3 minutes at 400° for 2"x2" ceramic tiles. 12"x12" tiles they recommend be pressed for 7 minutes!

@nicolescraftycreations 2 жыл бұрын

Thank you 😊

@gszeluga 2 жыл бұрын

Don't use teflon with sublimation. It's holds moisture. Just butcher paper

@tracyrusso3176 2 жыл бұрын

You could use a Teflon pillow underneath the canvas so the heat will get to it.

@Liam-ok7mu 2 жыл бұрын

PЯӨMӨƧM

@lilly4able 2 жыл бұрын

What brand are the magnetic sheets your using?

@nicolescraftycreations 2 жыл бұрын

Hi, I used Ultrathin magnetic sheets by x-bet

@49lucky Жыл бұрын

This was great I was looking for new bookmarks

@nicolescraftycreations Жыл бұрын

I would suggest using a better magnet sheet. The one I used didn’t have a very strong hold.

@meganbrandenburg1085 2 жыл бұрын

What kind of paper did u use?

@nicolescraftycreations 2 жыл бұрын

A-Sub sublimation paper

@bethanypond6317 2 жыл бұрын

What kind of ribbon did you use?

@nicolescraftycreations 2 жыл бұрын

White Grosgrain ribbon

@niezbibz5020 2 жыл бұрын

How long does it hold up

@nicolescraftycreations 2 жыл бұрын

I used the spray on a cotton shirt for my daughter a few months ago. It’s still looks like I first pressed it, I have washed it over 10-12 times. For the canvas bags I made during this video, I gave them to my daughter teachers and they looked just like the day I pressed them. Now I didn’t wash the canvas bags but I am assuming it would be just like the cotton shirt I made.

@debbieramirez313 2 жыл бұрын

I just purchased this item. The spray did not work. However, I was able to switch bottles. Worked great! I then coated a onesie for an Etsy order. It turned out great! Very pleased. I hope it holds up. Great Video!

@debbieramirez313 2 жыл бұрын

When you say "painted" the canvas, do you mean you spread the coating with a brush?

@nicolescraftycreations 2 жыл бұрын

Thank you. This spray is great. When I said I painted the canvas, I just meant that I sprayed the canvas with the spray and then used a paint brush to spread it evenly over the area I was trying to sublimation on.

@jessicae7229 2 жыл бұрын

I think u didn't give the poly enough time to cure n thts y it looks melted.

@nicolescraftycreations 2 жыл бұрын

Hey Jessica, I let it cure for over 8 hours. What would you recommend for the curing time?

@johntrevy1 2 жыл бұрын

@@nicolescraftycreations Overnight to be on the safe side.

@jalalquadirnayan2990 3 жыл бұрын

Hi Nicole, you think this would work on rubber flip flops ??

@nicolescraftycreations 3 жыл бұрын

I am not sure but it wouldn’t hurt to try. I might have an pair I can try it on and let you know.

@nicolescraftycreations 3 жыл бұрын

Hi Jalal, I did try it in a pair of rubber flip flops and guess what?? Yes, you can. I will post the video in the next few days so you can see the full results. It’s a little tricky.

Ең жақсы KZbin

Пікірлер