FirearmTutorials .com

Пікірлер

@Jeremy-pi5mz 7 күн бұрын

I just bought one from gun trader paid 300$ and it immediately had this problem . The dude ripped me off. Emailed eotech waiting to see if I can send it in for that 80$ bench fee 2014 year of production

@FirearmTutorials 7 күн бұрын

That sucks... I have 3 or 4 of them and the one in this video was the only one to have this problem. Though it was also the one which has seen the most use. I have many EOTech, aimpoint, trijicon, vortex, etc red dots. The EOTech is still my favorite.

@Jeremy-pi5mz 4 күн бұрын

@@FirearmTutorials will post results 2 days now waiting on RMA request

@tonyclams1955 18 күн бұрын

Price must have come down a little bit on the 31 round mags . They're a $149 now.

@ddigre01 19 күн бұрын

Where have you been....AGAIN!

@FirearmTutorials 19 күн бұрын

I got another new house... but it doesn't have a shop :(

@ddigre01 19 күн бұрын

@@FirearmTutorials I hear you, same boat, had to get rid of my woodshop #bigsad

@FirearmTutorials 19 күн бұрын

@@ddigre01 Yea... I was doing Cerakote in that shop for the last 1.5 years before I sold it. It was a labor of love like the rest of this stuff but sometimes I really miss it.

@jeremymcauliff8485 23 күн бұрын

Im wanting a LEM trigger for my USP9 Compact. After watching this video, ive decided to take it to my local gunsmith for the conversion.

@FirearmTutorials 23 күн бұрын

It's a great system. I have it on my carry gun.

@briannguyen3416 25 күн бұрын

What kind of recoil spring assembly would u recommend for a bolt in that style I can’t put my old recoil spring assembly in the one you have

@FirearmTutorials 24 күн бұрын

Funny you mention it... I think I finally wore out the one that came with my gun. After 10k-ish rounds. Here is what I recently replaced it with and I ran 5 mags through it with no issues: www.robertrtg.com/store/pc/RCM-MP5-RECOIL-ASSEMBLY-NEW-p14672.htm

@FirearmTutorials Ай бұрын

LOL... The SD card that had the footage was damaged so I lost it all :*( In hind sight, I should have used an A2 stock. It took months for the sand to finally work its way out of the A3 stock but everything held up. The wheel on the Aimpoint was a little crusty to for a while as well. I completely submerged the gun in some large puddles so water+dirt (not quite mud) and had no malfunctions.

@Antti4548 Ай бұрын

2024 still waiting

@Cflo_17 Ай бұрын

Thank you I found this video helpful

@thevillageyid Ай бұрын

Does the P30L have the same decocker system?

@FirearmTutorials Ай бұрын

No the P30 has a button on the rear by the hammer which I think is less intuitive.

@thevillageyid Ай бұрын

@@FirearmTutorials Is it still just as safe, aside form the intuitiveness?

@FirearmTutorials Ай бұрын

Yes just as safe. Some people remove the decocker on the P30, but then you end up with a weird looking spot on the rear where there used to be a button but now there isn't. Really strange in my ipinion.

@michaelcreel515 Ай бұрын

What do the pistons do? And how are they used with a suppressor??

@FirearmTutorials Ай бұрын

They go inside the suppressor so you can it on guns with different barrel threads.

@the_leviathan6372 Ай бұрын

Can a full usp mag fit a uspc? Or do you need to buy uspc mags for a uspc?

@FirearmTutorials Ай бұрын

@@the_leviathan6372 no the fullsize are too large to fit in magwell of the compact.

@the_leviathan6372 Ай бұрын

@FirearmTutorials Alright got it. Thanks. Also. Where could I find a compensator for my Compact? What would be a good website?

@mr.d6186 Ай бұрын

Does not work with omega 9k on 3lug. Works with direct thread mount and a little file work on the light. If anyone was wondering.

@kirksanders9478 Ай бұрын

What would cause a bullet to get stuck in the barrel?

@FirearmTutorials Ай бұрын

@@kirksanders9478 A round with little or no gun powder that doesn't have enough energy to leave the barrel.

@lefunnyN1 Ай бұрын

the expert slide looks so nice

@FirearmTutorials Ай бұрын

@@lefunnyN1 it is very nice! Even better than the normal USP.

@Kryptonite357 Ай бұрын

Wtf? Of all the examples he could have picked up to illustrate his incorrect conclusion, he grabs a pistol that is renowned for having one of the strongest, must durable barrels to ever exist? Dude doesn't know what he's talking about.

@anotherglock3930 2 ай бұрын

I need one of those

@FirearmTutorials 2 ай бұрын

@@anotherglock3930 I'm listing this on gunbroker this week

@anotherglock3930 2 ай бұрын

@@FirearmTutorials I’ll be lookin🫡

@williamsmith7333 2 ай бұрын

thank you

@Bobby_Digital_23 2 ай бұрын

Ive learned shooting with an P8/USP, so i never shot another pistol. Are there more guns outthere with that decocking system?

@FirearmTutorials 2 ай бұрын

Yes. Some Beretta and CZ pistols. I have both but my versions only have a safety which annoys me

@Bobby_Digital_23 2 ай бұрын

@@FirearmTutorials thank you for this information. Why doesnt this system spread more? Its great. Theres npthing to worry. Sorry 4 my engl im german.

@FirearmTutorials 2 ай бұрын

There just aren't many hammer fired guns being made any longer. They're almost all striker fired now 😢 the hammer fired design has some advantages.

@stephenedwards5063 2 ай бұрын

Great creation.

@FirearmTutorials 2 ай бұрын

Thanks! Still my favorite rifle AR! I've changed the optic to a gray EOtech and the stock to an MOE SL. I did the upper and lower reciever in Midnight Cerakote.

@edcweekly6395 2 ай бұрын

Really wish these “custom” pliers worked with the USP Compact…they won’t open enough to come out after you install the TRS.

@FirearmTutorials 2 ай бұрын

Interesting... I've never swapped a TRS on a compact gun before.

@SoftAsFur 2 ай бұрын

I think you cam all ready see the aluminum shavings coming from the snap caps. Any snap cap but those A-zoom aluminum ones!

@bensthoughts2805 2 ай бұрын

Been looking for one of these for a while and cannot locate one :|

@FirearmTutorials 2 ай бұрын

Contact me at firearmtutorials.com

@bensthoughts2805 2 ай бұрын

@@FirearmTutorials sent you a message.

@bensthoughts2805 2 ай бұрын

@@FirearmTutorials I contacted you. Never heard back.

@bensthoughts2805 2 ай бұрын

@@FirearmTutorials Never heard a thing back from you. Not sure what is going on lol. Asks me to contact and reach out and then nothing haha

@rpq1968 2 ай бұрын

works great.

@CharlieTheAstronaut 3 ай бұрын

As a veteran of the german military I love HK, but these bags are overpriced

@FirearmTutorials 3 ай бұрын

everything with the HK logo is over priced. Here's one even better: www.midwayusa.com/product/1007098011?pid=669071 That came with my USC. It's no better than a $10 one from Walmart. Oh, an the HK logo already wore off anyways...LOL

@CharlieTheAstronaut 3 ай бұрын

@@FirearmTutorials Except for the actual weapons, I served with the USP, G36, and MG3. Later the french FAMAS. I have a sticker on my car since like 2012, a baseball cap, and a desk mat from them, so nothing that can actually break haha and they are of ok quality for the price I paid, but some stuff you pay for LOGO only as you said.

@FirearmTutorials 3 ай бұрын

@@CharlieTheAstronaut How did you like the FAMAS?

@CharlieTheAstronaut 3 ай бұрын

@@FirearmTutorials Quite a bit, it is relatively simple, very good for close/medium range due to the bullpup design, we had no sights or magnifiers on them. The G36 had the built in red dot and magnifier with daylight or battery operation. Overall the g36 is a better alround weapon as you can easly engage at longer distances if needed, and the dual /tripple (not recommended) mags are very practical.I know many complain about the g36 melting or deforming, that is not an issue I have faced or seen. They are a pain to clean on the outside tho, as the plastic fuses with every dirt particle you encounter in the field haha. I was the machine Gunner as I was one of the bigger guys, the MG3 is old but I love it with all my heart, my buddy who had to carry my spare barrels, and ammo hated it hahaha :D

@FirearmTutorials 3 ай бұрын

@@CharlieTheAstronaut Great info! Thanks for sharing. The rate of fire on that MG3 must be unreal...

@albertptran 3 ай бұрын

Nice

@appstate1996 3 ай бұрын

I just bought my first suppressor. A Silencerco Hybrid 46m. So, do I need a 3 lug mount for the threads on the gun and another that fits into the suppressor ?

@FirearmTutorials 3 ай бұрын

3 lug mounts are only needed for guns that have a 3 lug barrel. So MP5, some 9mm AR barrels, and a few others. For most handguns you'll need a piston and booster in the correct thread pitch.

@Longshot88 3 ай бұрын

This video came out when I was 11, and helped me when I was 21. Fixed an MP5 that we thought was screwed. Thanks for the info.

@angelicamicuanskitorres6497 4 ай бұрын

Link para compra ?

@gen-zboomer 4 ай бұрын

I really like the idea of having a safety on an LEM trigger. Looking at a USP9 with an LEM trigger, at first was hesitant because I wanted the V1 style, but I realize the LEM will work fine

@jtmattel05 4 ай бұрын

Theres an easier way…. I just dont have a way to record it when i do it.

@OnionsMakeYouCry9 4 ай бұрын

That long story about the gf's name on the one shell is one I'm dying to know after watching this. Also, my inner 12 year old couldn't help bit chuckle by the repetition of the word "wad," followed shortly afterwards with a reference to "skeet shooting," and despite being technical terms in context, the slang terms they'd become now tickles me whenever talking about shotgun loads. Lol, loads... I'm 34, I shouldn't be laughing at that this hard. Anyway, what's up with the name on the one buckshot round? I don't wanna get off point and curiosity is burning after that moment which was then just brushed off. I have the time for a long story if you do/feel like sharing it!

@FirearmTutorials 4 ай бұрын

It's actually not that long of a story... she lost a bet and had to shoot a shotgun. So I bought the stoutest rounds I could find and labeled them. She never shot them and I think I still have them somewhere.

@slayednpked1 4 ай бұрын

I’m so paranoid about this type of issue I just use the regular old threaded attachment and I use some Teflon tape so it doesn’t come loose.

@FirearmTutorials 4 ай бұрын

How does the Teflon tape do with the heat?

@slayednpked1 4 ай бұрын

@@FirearmTutorials it stays put, turns a little black but just be sure you wrap the threads a few times. I usually do 4-5 wraps.

@fiskking 4 ай бұрын

Credit card works better/safer than a razor 😊

@mjzangenberg 5 ай бұрын

Do you use thick grease to lube the slide catches and the spot the hammer rides on the slide? is that of any good ?

@FirearmTutorials 5 ай бұрын

The only grease I use on the USP is the slide plate for the thumb lever. Just a little where the pin comes through the metal plate.

@mjzangenberg 4 ай бұрын

@@FirearmTutorials Thumb lever, the safety decocker lever or the slide release lever? And have you experienced any wear on that spot?

@magnum1165 5 ай бұрын

Thank you so much for this video, I’ve had a casing stuck in my 357 magnum lever action for two weeks now and didn’t have a clue of how to take the casing out without damaging the barrel

@mking9446I 5 ай бұрын

I'll work up to a halo 1 day. Probably the only otf I'd buy. I loke fixed blades personally. Still fun vid

@olm911 5 ай бұрын

.578x24 is standard for 1911. thank you for the great content.

@rondobrondo 5 ай бұрын

"easier to get it out than it is to put it in" Amen brother

@jessoster637 5 ай бұрын

The adapter that silencerco sells does not add any length. Great video thx

@FirearmTutorials 5 ай бұрын

I actually lost this 3 lug adapter at the range. They don't sell this one any longer and I don't have the newer one.

@MsPatriotfront 5 ай бұрын

You sprayed metal polish on your BCG? Folks, if you're looking for a carrier that you can run your finger up and down comfortably, then listen to this guy. "You can't really go wrong with it...." Sweet mother of God.

@mjzangenberg 5 ай бұрын

I just purchased my first firearm...... And guess what I can't have a Weaponlight on it H&K USP9 SD..........xD Because HKpart dont ship to outside US, Alaska, Hawaii etc due to restrictions xD what to do, No rail adapters to be found in europe where I have looked

@FirearmTutorials 5 ай бұрын

e-mail [email protected] and see if they ship to your location.

@mjzangenberg 5 ай бұрын

@@FirearmTutorials The issue is they are not allowed to ship from US to outside US, National US only as I understand due to Regulations on weapon parts

@FirearmTutorials 5 ай бұрын

@@mjzangenberg ITAR... Usually just things like EOTechs, ACOGs, etc. but sometimes it does cover "mounts" and related things. Put a post on hkpro.com and ask how you get a USP light mount in your country. That would be your best bet if it's possible.