28 күн бұрын
7 ай бұрын
7 ай бұрын
8 ай бұрын
8 ай бұрын
Пікірлер
@chadrides914 6 сағат бұрын
Nicely done!
@WolfsClips 15 сағат бұрын
This deserves 1M likes man who doesn’t like squarebodies
@MikesMischief 5 сағат бұрын
I agree. Only 999,989 more to go…. We will get there eventually.
@delchapo2849 19 сағат бұрын
The other comments are talking about flipping the roll so you can keep tension as your wrapping. They aren’t talking about going from the bottom up.
@MikesMischief 18 сағат бұрын
I use teflon paste. But sometimes you’re out in bfe and only have that flattened crusty roll in the bottom of your pickup tool box. I can never remember what direction it’s supposed to go on. I imagine it like a big nut I’m threading on and that helps. This is a small clip from an air-drier replacement video I made and in the video I take the tape off and use Permatex Thread Sealant on the fitting because I’m not an animal.
@jacobhorn4784 Күн бұрын
Is that an Altman Taylor steam tractor? Only asking as I have restored a radiator similar to the one installed on that tractor and it belonged to a 1918 model. In either case very cool piece of history
@MikesMischief Күн бұрын
Yes I believe it is.
@chadrides914 Күн бұрын
Yo Mike. I wanted you to know I appreciate your rolloff tech / mechanical / weld videos.
@MikesMischief Күн бұрын
Thank you Chad.
@chadrides914 Күн бұрын
@@MikesMischief yeh the rolloff cable swap where you pulled it through the entire frame system by chaining the cable together and welding it was pretty clever. I’ve never done one that way.
@MikesMischief Күн бұрын
@chadrides914 I got that idea way back in 2011. I used to haul scrap 3”&4” thick steel cable from the dragline crane at the coal mine. One time I asked the crane guys how they restring that big ba**ard and they do something similar with a connector I think. I asked my boss if I could try it on the rolloff. They said no we just use a loader and pull it all the way out and then fish it back through with 2 guys. I think I begged them to let me try back then. I was new to the industry and they didn’t really listen to me too much. I knew a decent weld would hold long enough to pull the cable through and it’s the non-working end of the cable so I knew I could cut off any heat damaged cable. I told them that’s how they do it at the mine and they eventually let me try it. It does work pretty good. I’m not sure how much faster it is than just pulling it out because I’ve never done it that way.
@chadrides914 Күн бұрын
@@MikesMischief right maybe not faster but like you mentioned you were able to do it by yourself without 2 other guys pushing and pulling cable which is what we do. Good stuff. 👍
@TheDennzio 2 күн бұрын
yeah baby git it
@mrandersonxd 2 күн бұрын
Wow, youre not doing this correctly lol.
@MikesMischief 2 күн бұрын
That is the correct way. If you go the other way the tape will ball up.
@chelsajones9717 2 күн бұрын
Turn the roll around and rotate. Way easier
@MikesMischief 2 күн бұрын
Yeah that would make a great video…
@elijahdaniel1555 2 күн бұрын
You don’t even know how to put Teflon on 😂
@MikesMischief 2 күн бұрын
That’s 100% the correct way to put teflon tape on threads.
@jonrobbins907 2 күн бұрын
FAIL! You should have the tape coming off of the top of the spool.
@MikesMischief 2 күн бұрын
Not when the threads are pointed away from you.
@eldoradoboy 3 күн бұрын
Tried to adjust the slacks on my 1978 vintage international loadstar school bus (not a camper, I keep them all seats). Slacks frozen as can be. This video was most excellent help in getting my old ones off. They are of course manuals. I didn’t have to remove the cans , they were loose enough that the pushrod would completely disengage from the slack with a little pressure. My snap rings are old school style without the eyes for pliers. On those best way is to spin it till the end is in the middle of a spline (these old trucks are wide 10 spline). Then can get a screwdriver under it and start it out of the groove and work around. I got lucky these were not frozen to S cam, they came off rather easy, these look original or close to it . This bus lived in the desert it’s whole life so no rust to speak of but lots of dust! I can see I’ll need to do brake shoes soon on it. What do you recommend for little guys to lift the rear 22.5” wheels and the drum on and off.. I’m all of 140 pounds . Again thanks for a great video
@n40tom 4 күн бұрын
Thanks for your rather windy explanation on how not to break a spindle . Instead of going to a machine shop and going through all of that wouldn't it be easier just to remove the rocks permanently or raise your deck . I've been cutting 3 1/2 acres for 10 years with my bad boy I actually hit a 5/8 piece of vertical rebar used as a property marker, I turned it into a pretzel and this is the first spindle that broke . In my own opinion is John Deere is trash anymore they are nothing like they used to be . That being said thanks for the video
@Yamauma-No.10 6 күн бұрын
No chains. Does she use steam to steer? Any hydrostatic/zero-turn functionality in the front wheel?
@MikesMischief 6 күн бұрын
I think it’s a worm gear but I’m not 100% sure.
@deandreyawilkins3006 6 күн бұрын
That is a Malibu
@joanedwards-de6pl 6 күн бұрын
Two friends of mine grew up in Wing. Their family ran the grocery store-but that was many years ago.
@jordanalandry1866 7 күн бұрын
Wing ain’t no damn Ghost Town lol. There’s a lot of ghost areas in very small inhabited town, the old original churches and schools things like that matter fact I don’t wanna give away the secret but the old school in a particular town has done a haunted house. You can go in there anytime really I mean if you live up there, it’s unlocked sometimes you can just walk in Old Farmsteads and what not but you kinda have to know the land you kinda have to know the area and the people you don’t want to be out there driving around wandering amok but if you’re hunting or whatever you have permission or not posted things like that that’s really where you’ll find a lot of the stuff as somebody who owns one of those abandoned Farmstead yeah I mean definitely don’t go out there without asking around and making contact with somebody nine times out of 10 they’re gonna be pretty welcoming if they know why you’re there but you know if you’re walking around you are liable to get shot or confronted. You know we have big issues with people hunting on our land literally within spitting distance of our posted signs and that is very infuriating when people just make themselves at home and then have the audacity to get confrontational instead of saying oops I’m sorry my bad you know I fucked up. Let me introduce myself. You know some people just are very entitled and people will steal from the sites, but I know back in the day up there and down south we would go cruising around find a place to park. If you will a lot of times out on some abandoned Farmstead that’s where we would go I guess. lol read between the lines so I stumbled on some really interesting places just totally on accident just taking a gravel road and following it to wherever
@MikesMischief 7 күн бұрын
I think I said in the video that wing isn’t a ghosts town but that it’s a small town. I want to try to be respectful. It’s just a Halloween special I do on my channel and not my regular content. I have to ad something in the video to look at and most of the ghosts towns are a diagonal road that may or may not have rubble strewn about. Some places there’s nothing to see at all. Wing is a good example of a very small town that is likely an accumulation of family with roots in the surrounding ghost towns. I showed brand new asphalt and a remodeled c-store showing that it’s probably going to be around for a while yet. Admittedly I’d love to contact people to get permission to go deeper into these places but I have pretty severe anxiety and I hate bothering people. Also I don’t really have a ton of time when I’m out filming. I work full time and have 3 kids to raise and a house to maintain. So KZbin gets what’s left of my time which isn’t much.
@Carlos-s1r8e 7 күн бұрын
Súper Truck with Súper Power three power axles with a CATERPILLAR!!.
@peted5217 7 күн бұрын
Replacement for Oxen & Draft Horse teams of 1950s !
@MikesMischief 7 күн бұрын
I’ve tried pretty hard to find a team of horses working a plow. I filmed one here a week ago pulling a disk. There was another team pulling a swather but it’s off in the distance a ways. I’m going to try to get that video out before October.
@jamesl9686 8 күн бұрын
Rain or shine, I'm pullin' that sled with mine -
@jasonhepler9925 8 күн бұрын
Until it starts eating thru the rim than u will be really be screwed by than by using the green slime
@MikesMischief 8 күн бұрын
The farmer that taught me this trick has been doing it for decades and hasn’t had any rims corroded through. He puts it in expensive tractor and implement tires. 70% of people with a chronic leaking mower tire will go buy a new one with a new rim already mounted ready to use. They then throw away the leaky tire with the old rim. This mixture will give that tire another 5-10 years of service keeping it out of the landfill and eliminating the need to produce another one. This mixture is in every single mower and atv tire that I own and has been for years. When I get a new machine it’s the first thing I do.
@reddirtfarm7704 8 күн бұрын
Long before we used the term Snowflake...
@BillCoxoutfit 8 күн бұрын
Im tired Boss 😩
@MikesMischief 8 күн бұрын
Haha. The name of that truck is actually Grandpas Ole Beater.
@MikeSmith-nu9wt 9 күн бұрын
I can get the obs trucks with the 6.5 diesel for 3500 or less , most people can't keep them running , so they park it . If you need one i can hook you up ..
@MikesMischief 9 күн бұрын
I think my boss saw this pickup and it reminded him of his dad. We got it running tinkered a bit and shoved it into the weeds. I think he paid 2500 but it’s smashed by the extended cab and it’s 2wd.
@ENZautomotive 9 күн бұрын
Good video. My question is : we know the issue/problem. what was the cause... Lack of maintenance, leaking injector diluting the oil with fuel so minimal you might not notice it? Because I'd just replace push rod,rocker,maybe cam.🤷♂️
@MikesMischief 9 күн бұрын
We were trying to get it running the day before and it fired up. My boss revved it to the moon trying to keep the fuel primed. I’ve heard that letting them sit and revving them to the moon especially can cause them to bend. You can see the crater on the rocker arm isn’t very deep. The 6.5 is just the old doggy 6.2 with a small turbo on it. I think they use the same springs in the heads. I wonder if those springs aren’t stout enough for the added boost? At high revs you might get valve float. The rocker arms just sit there. The only thing holding them in place is spring tension and that shallow dish on the rocker arm. Maybe you see where I’m going with this. High revs, weak spring, valve float, pushrod dancing around loose for a moment. If you have an aftermarket tuner or some addition causing more boost you’ll see more bent pushrods than a stock motor that isn’t being hammered on.
@themueth 9 күн бұрын
What's the booster part number?
@MikesMischief 9 күн бұрын
Cardone 54-73356 on Amazon
@MikesMischief 9 күн бұрын
a.co/d/ibRsxPJ
@fortunatomontella7810 10 күн бұрын
I have a question, before you start to loosen the nuts on the chamber do u release the parking brake with the wheels blocked?
@Ishan_Fortnite_god123 10 күн бұрын
No headlight💀💀💀
@MikesMischief 10 күн бұрын
They remove that light for better air flow into the engine.
@Ishan_Fortnite_god123 10 күн бұрын
@@MikesMischief yea i know about that intake in cars but they said it adds more horsepower to the engine and speed i know when modded cars dont have headlight and i knew it was a intake
@metalfarmer9286 10 күн бұрын
Just got back from WMSTR. Amazing place.
@MikesMischief 10 күн бұрын
How’s your feet? It was a great time but I could barely get back in the car to go home lol
@metalfarmer9286 9 күн бұрын
@MikesMischief The dogs were sore for sure. Luckily the old lady drove us home. I was passed out before we even got off the property. I registered for Steam School before I left as well. I'm a glutton for punishment I guess.
@MikesMischief 9 күн бұрын
@metalfarmer9286 hahaha yeah. I might try to do that some time in the future. Maybe when I retire. I’ve been 2 years now and I still didn’t see everything. Have to go back again I guess.
@peted5217 12 күн бұрын
Kustom Wire Wheels have Lifetime warranty !
@josephpeluchette191 13 күн бұрын
Legend has it a unicorn, and running gm product was born that day it ran for an entire quarter mile, then was never heard from again lol
@DavidSchuster-eq3jl 13 күн бұрын
That is not a Brake Drum !!! That is a rotor get it right I am watching you like a hawk
@MikesMischief 13 күн бұрын
It’s a rotor-drum. Service is a disc parking is a drum…. Grab a tissue Nancy. Dry them tears.
@SkylosSobaka 14 күн бұрын
Well bolt that one open and get it to the shop
14 күн бұрын
Ah fuck
@JGarcia-x9m 14 күн бұрын
Plugs are risky because they can damage the inner wires of the tire
@MikesMischief 14 күн бұрын
No, they’re not risky at all. Old tire salesman stories there. Rubber and cotton can’t damage steel any worse than the object that punctured the tire. I’ve installed hundreds of plugs. Hundreds. In the landfill 6 times a day with 10 tires on the ground. Rail road ballast, gravel roads, under-inflation, 175° asphalt, scorned exes with sharp objects are harder on a tire than any repair a guy might make with a plug kit. Stretching this beads over the rim isn’t good on the belts either, leaving a foreign object in for long periods of time (slow leak). Wheel full of mud. Imagine the damage to the steel belts when a loaded cement mixer is doing a 70 point turn to get into someone’s back yard. I actually drill out my punctures with a 3/16 drill bit now before running the plug in done that for the last 200 plugs or so. I should update this video.
@milancerpwns9358 15 күн бұрын
You can run on kerosene too but if you get caught you're in big trouble
@MikesMischief 15 күн бұрын
JP-8/kerosine/diesel are all very similar. That’s what most of the military uses in their trucks overseas. A lot of the big planes use JP-8. It’s the dyed off-highway diesel that’ll get you cuffed and stuffed. That 55 gal drum grandma used to get to heat the house was dyed pink because there were no road taxes paid on it.
@saladdraws9081 15 күн бұрын
Don't be surprised when it stops working
@MTMProductions 15 күн бұрын
fr
@MikesMischief 15 күн бұрын
I’ve been doing this for over 20 years Mr. Salad. You can use almost any lightweight oil based lubricant to pre fill your fuel filters. I’ve gone it dozens and dozens of times. Truck is still running…. So when does your surprise kick in? Cause she’s still running.
@saladdraws9081 15 күн бұрын
@@MikesMischief has it been survived in that time of 20 years? Increase wear and tear on your engine as well as the possibility of breaking
@MikesMischief 15 күн бұрын
@saladdraws9081 what do you think diesel is? It’s very lightweight oil. When it’s cold out it’s thicker oil. Yes they have all survived. Show me some facts dude because this is life for me and I can tell by your comment you have no clue about a diesel engine.
@aarondavis8652 15 күн бұрын
I think there's some type of misunderstanding going on here. One says it runs fine no problem. The other believes that we are pouring used motor oil unfiltered directly into the fuel reservoir like filters don't exist. Diesel engine will run off of bacon grease. No matter what you use, it still has to be filtered to an extent before going into a fuel reservoir.
@Drift_Axolotl 16 күн бұрын
Why the fuck do people post this absolute shit and think they will get famous
@DavidSchuster-eq3jl 16 күн бұрын
Seriously ???
@MikesMischief 16 күн бұрын
When the fire and emts are laughing it must be a good show.
@stevegriffey6657 16 күн бұрын
Good show
@EYE_SPIDER 17 күн бұрын
Great shots captured brotha!
@MikesMischief 17 күн бұрын
Thank you Brice.
@EYE_SPIDER 17 күн бұрын
BOOOOOOOM BABY!!!
@CCAutoWorks 17 күн бұрын
Freaking awesome
@greggamandabarkus4235 17 күн бұрын
Thanks Mike. I'm A trucker and a Detroit fan. Awesome truck and video
@MikesMischief 17 күн бұрын
Thats awesome man. Those mid 90’s 12.7 were the best engines ever built in my opinion.
@CCAutoWorks 18 күн бұрын
Hell of a pull
@MikesMischief 17 күн бұрын
Thank you Chris. How’s things been down your way?
@CCAutoWorks 17 күн бұрын
@@MikesMischief hot WBU
@MikesMischief 17 күн бұрын
@CCAutoWorks it’s muggy up here but mid 80’s so I shouldn’t complain.
@CCAutoWorks 17 күн бұрын
@@MikesMischief 109 here with humanity but no rain
@Braveheartman123 18 күн бұрын
Thought there would be an actual video. It’s nothing but half of a dual exhaust
@MikesMischief 18 күн бұрын
I was going to try to make a longer video of it but it’s in a shipping container at the moment and this summer just kinda got away from me.
@diatomicfire9624 18 күн бұрын
Just check your nuts in general.
@calvincrews3885 18 күн бұрын
The Mercury Cougar looks great for a fifth generation model
@MikesMischief 18 күн бұрын
I thought it was a cutlass or a Buick LeSabre when I first saw it for sale. I saw that it was a Mercury and had to drain my savings immediately. It’s been a fun little car.
@rxspecta 19 күн бұрын
LOL!! Lutefisk, Meatballs & Lefse dinner sign in WIng, I have WIng highlighted on my google maps & I have no idea why, possibly I drove thru there while goofing off on days off from Killdeer I don't no!. Like your video's. I miss ND. I think you would like the Fort Ransom Sodbuster show in Sept. like stepping into the past 100 years ago at least they will be running a farm as if it's 100 years ago there was people making peach pies in a open fire it was really cool.
@MikesMischief 19 күн бұрын
I might have to check that out! I’m going to Rollag Memorial Day. I’ll look into. It. I only do the ghost town videos for Halloween once a year.