OSREN Official

Пікірлер

@dustin3700 53 минут бұрын

From oragne peel to shiny orange peel. Zero need to tape that edge using a DA.

@mikem1436 3 күн бұрын

Seems like the company has good products. Thought about buying some product but unfortunately the shipping cost is a deal breaker. Thanks for providing such good information.

@yunushazmi1963 7 күн бұрын

boleh jadi ahli parlimen...

@myapch 9 күн бұрын

Nice pretty likeable look and good personality

@kakashi99908 15 күн бұрын

11 years sense Osren dropped this banger of a video!

@hobby_warna 16 күн бұрын

Bro, i got ur point about the consistency, but, Comparing abrasive paper made by fabric vs paper, kinda unfair. Anyway, i am a big fan of osren, i used it alot

@Super_Yan 16 күн бұрын

Minat Nina❤

@detailrave7709 17 күн бұрын

Too fancy, just use 0000 steelwool, cost effective and efficient specially for detailers.

@1kontrabida 18 күн бұрын

Wheres Henry? is he still with OSREN?

@circe... 20 күн бұрын

Thanks for the info. I was thinking every other week, but I'll try out once a week. I have a Bronco and it's just so much to wash that thing! Can't even reach the entire roof. A lot of work! But may be great for losing weight. :)

@OSRENOfficial 19 күн бұрын

Every other week might be ok, it depends on how dirty the car is. The once a week is generally a recommendation for tropical weather cars as we have rain and sun throughout the year.

@ThanaKrishnan 20 күн бұрын

great video and explanation

@johnschiesser144 21 күн бұрын

Excellent video! I have to admit I've never really considered the difference between different brands of sand paper, and its impact on correction. Fortunately, I typically use 3m sand paper.

@Luxe_express 21 күн бұрын

What do you think about 3D's Compounds?

@sahilnazri1928 20 күн бұрын

Best compound ever

@danlc95 11 күн бұрын

3D ACA500 and Optimum Hyper Compound are the only compounds I use anymore. Low dust, enormous cut, easy to refine finish.

@EwangGekko 21 күн бұрын

0:18 😭😭😭

@EwangGekko 21 күн бұрын

anda sudah belajar sesuatu? sila komen 😁

@tbortner1 21 күн бұрын

Sand with your block at a 45 degree angle if you want more consistent results.

@thatdude3832 22 күн бұрын

So what's your compound and polish combination? I would like to buy some.

@OSRENOfficial 22 күн бұрын

There is no fixed formulation in compounding and polish, but we can narrow it down to these: UNA 58 - levelling / severe defect removal. Usually paired with denim, velvet, and occasionally wool pads UNA 48+ - Compounding. Usually paired with wool or microfibre pads Nao Clear 38 - Polishing. Usually paired with microfibre or foam pads, occasionally finer wool for hard paint as finishing our products can be purchase on: E-store : e-store.osren.com/global/product-category/professionals/ distributors: osren.com/distributors/

@matthewgibb2640 22 күн бұрын

The abrasive is not uniform basically. So non uniform sanding marks which can be more difficult to remove. Never skimp on quality abrasives, their worth the extra cost. Good video guys.

@מדינט 22 күн бұрын

A lot of compounds today are trying to cut and finish and I guess it's part of the issue?

@OSRENOfficial 22 күн бұрын

We are generation of instant gratification xD, but yes, such are the demands in the market these days. But consistent triumphs!

@amukcromok3857 23 күн бұрын

Cerium oxide ni boleh hilangkan scratch cermin depan tak

@OSRENOfficial 23 күн бұрын

Susah, boleh bertambah baik condisi. glass compound 14 lebih sesuai untuk buang calar halus wiper. Untuk calar teruk, kena pakai peralatan yang khas untuk cermin.

@ahboygengone 24 күн бұрын

How many % IPA?

@OSRENOfficial 24 күн бұрын

the ipa we are using is 99.6% in purity, diluted 1:1 (equal water equal alcohol) to make it roughly a 50% rate

@hafizuddinhalimz 25 күн бұрын

Dont sell kidneys for iphone

@MasrinaRina-gr5is 28 күн бұрын

Masyaallah cumil nya😊

@Madzci 28 күн бұрын

does the product haze after removal? becuase i tried ceriglass and that is complete failure once the glass get cold during a rainy night is pure haze and dangerous and that after using their eraser to wipe off residue

@bm_wuratli6883 28 күн бұрын

pad: i am joke to u bro? let's me recycle duh*

@DDUTCH-g6r Ай бұрын

Is this metal? Not plastic with a alu cover? Like alot of these days cars?

@OSRENOfficial Ай бұрын

For this particular car, it was solid metal with a chrome finishing, not plastic. we have since upgraded our formulation to metal abrasive 16 and metal polish 19. e-store.osren.com/global/product/metal-polish-19/ e-store.osren.com/global/product/metal-abrasive-16/ video here: kzbin.info/www/bejne/bWm2fqZnp9Gnf7Msi=Esa517hAYvh0CYmI

@MacauGr Ай бұрын

there is a clock. no 20min passed. thats is why the results are bad

@KennyCleod Ай бұрын

This guy is a good teacher

@tamilveriyan6391 Ай бұрын

Coating z3 Brp lama tahan

@mohammadzakihusin1604 Ай бұрын

Mantap penerangan yg mcm nie kita nk

@claudiadavies5110 Ай бұрын

Adored this 😊😊😊. Is this how you avoid holograms in the first place?

@OSRENOfficial Ай бұрын

Hi claudia, holograms are basically very refined swirls, so sometimes it's unavoidable after compounding with a rotary. We prefer following up with a polish on a da for easier finishing. However this video is meant for those who does not have access to a da and hopefully this can be of help.

@claudiadavies5110 Ай бұрын

@@OSRENOfficial Thank you so so much! I've got a DA to do the flatter sections of the car and a little rotary to do the tight areas so I'm hoping being very gentle will help me avoid holograms and I will definitely follow your advice and sincerely appreciate your help🙂

@jeffa4822 Ай бұрын

so ertinya harga mahal tu labour charge bukan harga chemical 😅

@OSRENOfficial Ай бұрын

boleh dikatakan begitu. Kos sewa, labour, api, pun perlu ditanggung oleh setiap bisnes owner. Bukan sekadar product shj

@amirulshah8584 24 күн бұрын

Satu kereta amik masa sehari atau lebih. Utk coating, basuh kereta pn lebih detail drpd basuh kete biasa, biasanya ada tambahan mcm clay, buang tar, lepas tu polish satu body sampai sakit pinggang, lepas tu coating. Coating plk bkn mcm sapu wax. Sbb kalau sapu coating xrata, bila dia dah keras mmg nampak buruk. Semua ni perlu skill dan pengalaman. Sama mcm keje ofis, lg tggi skill dan pengalaman lg mahal gaji kita mintak. Betul?

@jon-xb1ng Ай бұрын

Hi, may i know where can i get my windscreens and windows done using osren priducts coz i dont have the rotary hand machine to polish.any place u recommend? Tq

@OSRENOfficial Ай бұрын

Hi Jon, glad you found interest. We do need to know where are you based at. Perhaps dropping us an email at [email protected] and our colleagues will assist you from there

@ImListeningToReason Ай бұрын

This is who you want working on your car.

@ajotech Ай бұрын

Awesome video!

@MOHDNURULNIZAMBINABDKASSIMPMJB Ай бұрын

Share item PAD polish?

@OSRENOfficial Ай бұрын

Hey, the pad we use is here: e-store.osren.com/global/product/blue-nano-wool/

@MOHDNURULNIZAMBINABDKASSIMPMJB Ай бұрын

@OSRENOfficial tq

@MlleVB Ай бұрын

how often should i clean it?

@OSRENOfficial Ай бұрын

Hey, we recommend cleaning it after each panel, but there are also cases where build up of gunks might be terrible on severely neglected car. I would say where pads are beginning to feel unbearably dirty, in our discernment, then it's time for a clean

@syedfadzillah7329 2 ай бұрын

Came nk tahu jenis cat keras @ lembut

@OSRENOfficial Ай бұрын

hi, boleh rujuk sini: osren.com/blog/2020/01/15/how-to-choose-the-right-compound-for-polishing-2/

@darkknight-pt4kd 2 ай бұрын

Nina😍

@clementlai777 2 ай бұрын

youre a lifesaver

@TerryBrown-l2v 2 ай бұрын

Good job sir thanku

@lesfaust9634 2 ай бұрын

I would try some vinegar. . It takes calcium Build up off of fish tanks,,.I'm sure it would cut minor water spots off of glass

@OSRENOfficial 2 ай бұрын

we've tried many times, did a demo: www.tiktok.com/@osren_malaysia/video/7401337649149103381?lang=en We also noticed that our country has hard water, that could be the reason why vinegar doesn't work. Whenever we travel to other countries for training/demo, things seems to be on the less severe side, mostly.