14 сағат бұрын
14 күн бұрын
Пікірлер
@fritzj6803 2 күн бұрын
Should I spray some WD40 to remove the hex nut? It's difficult to unscrew it.
@diybandit Күн бұрын
Logical first step. Spraying upward though is tough as it doesn’t penetrate as well. Maybe turn water off then turn handle to expose hex screw facing up, the spray and let sit. Careful not to strip the head. If you do, search my channel for what to do (this happened to me twice).
@TX_Natives 2 күн бұрын
Lol this is the craziest flagstone hack I've seen in a while. Good stuff.
@diybandit Күн бұрын
DIY baby
@SushilaPatel-z5r 2 күн бұрын
Very good
@diybandit Күн бұрын
Thanks
@Maynardd 5 күн бұрын
Serious question, why would you need to coat aluminum? It doesn’t rust in water.
@diybandit 4 күн бұрын
My ocd mostly! No, I was thinking it would help maintain the finish better and protect it from water spots, soap stains, and maybe corrosion or discoloration from cleaners. I didn’t really see a downside to it.
@Maynardd 4 күн бұрын
@@diybandit Haha! OCD is something I understand!
@Maynardd 5 күн бұрын
I saw somewhere else a guy actually put the trim between two pieces of wood , a couple 2x2s to keep it tight. and cut it with a regular saw blade on the miter saw. Slowly, of course. Worked great!
@timothyjohnson6258 5 күн бұрын
Yeah yeah, that's fine if you never wash your shower curtain and then have to go through this process again and again.
@jeremynguyen2346 6 күн бұрын
Hey 👋
@patpatmoomoo5524 7 күн бұрын
Finally, a recent review! Hope to hear updates. I’m really close to making my mind up on this particular model
@demi97yiya5 8 күн бұрын
could someone help me. I used redgard in shower. Mostly videos in youtube were without primering and I did the same. But then I started clean and noticed that some drops removed so easy, I did test on my wall and redgard was removed just by slightly pulling it out. Also I noticed when I was used brash, the redgard was dry so fast, just less then 30 second it was became dark red... it was not enough time to put fiber mesh on the wall. It is normal or not?
@diybandit 5 күн бұрын
I don’t think it’s normal for RedGard to dry that quickly. I remember it taking much longer to dry to the touch, but depends on temperature and humidity. If it’s drying too fast, it might be due to applying it in thin layers, too much ventilation, or using it in an overly warm or dry environment. As for the fiber mesh, it should be applied while the RedGard is still wet, so try applying it more evenly and allowing it to stay moist longer. If the RedGard is peeling off easily, there may be an issue with the surface prep or bonding. You might want to consider priming the wall for better adhesion.
@hamish9917 8 күн бұрын
As a confessed terrible plumber, I followed your instructions and was 100% successful rebuilding my ancient toilet.
@diybandit 5 күн бұрын
These wins feel good
@darrint2350 8 күн бұрын
Hi, thanks for the video. Very helpful for my installation. I have an issue. The bar has about 1/4 sag in the center after everything has been hung. I’ve tripled checked the bar with the stationary glass removed and it does not sag. Any pointers?
@CheefSpleef 9 күн бұрын
I was having the same exact issue and was so worried, i didn’t have any alcohol around so i used a glasses lens cleaning pad (similar to to your spray) and it worked wonders, thanks a million!
@diybandit 9 күн бұрын
Awesome to hear! Thanks for commenting!
@jonathandelia5028 9 күн бұрын
Thank you!
@I-am-a-power-top 9 күн бұрын
This was an extremely deceiving title.
@diybandit 9 күн бұрын
Ah, my bad! Next time I’ll title it Watch Rust Magically Disappear with Zero Effort.
@I-am-a-power-top 8 күн бұрын
@diybandit how about, "how to take care of common surface rust"?
@RubyRedDances 9 күн бұрын
Caulk is hard to remove without chopping up the drywall.
@diybandit 9 күн бұрын
Agreed
@printshopuniverse 11 күн бұрын
Video title is a bit misleading since you actually didn’t explain how to remove the sticky residue and ultimately failed to find a demonstrable way. Disappointing!
@BartoszLomnicki 11 күн бұрын
Thank you for sharing! Will be attempting this week <3
@diybandit 9 күн бұрын
Good luck!
@BartoszLomnicki 8 күн бұрын
@@diybandit went great thanks again!
@ohioguy4326 11 күн бұрын
I've used rustoleum in the past. I also have a hitch cover but it can add to the rust as dirt and water accumulates in the hitch and most people don't remove it to blast it out when washing the car.
@richardr3511 12 күн бұрын
Who installs boob lights nowadays when theres so many nicer flush mounts
@ilc-nl3yy 12 күн бұрын
What year and mpg?
@ColtonConley-e8q 14 күн бұрын
Well that was a complete waste of time. Save your minute and half and hit SKIP. This isn't a tutorial. He doesn't even end up with a clean hat at the end of the video🤷🤦
@diybandit 14 күн бұрын
Read the video title genius
@shaunasmith4379 14 күн бұрын
Ok, how do I take it lose to change the bulbs?
@phillmellina 15 күн бұрын
Nice work!!
@diybandit 14 күн бұрын
Thanks!
@bobkatz9021 15 күн бұрын
To get a picture on the screen you just needed to clean video heads. You did not need to clean the whole vcr ))
@cortneybunge359 16 күн бұрын
Way too much puddy lol
@karin4942 16 күн бұрын
How did you turn on the engine
@diybandit Күн бұрын
Ya turn the key
@deanpierce2807 16 күн бұрын
Back to the drawing board
@designermgb4310 17 күн бұрын
I wanna ask u about the grinder can u explain about it please
@trishaswaney648 17 күн бұрын
Thank you! Needed to fix a running toilet and you helped me with that process! Really appreciate it!
@diybandit 14 күн бұрын
So glad it helped!
@JuanitaPinto-c1q 18 күн бұрын
Genius! Thank you thank you 🙏🏻
@diybandit 18 күн бұрын
Glad it helped!
@ryanperry9838 19 күн бұрын
You can tell the tile guy sucked because he didn’t use a color match silicone even professional tiles do this crappy silicone job makes me so mad, Every grout you buy has a matching silicone color, which is what you use for changes of planes and you don’t just gob it on there as fat as possible
@shola7987 19 күн бұрын
Perfect exactly what i needed to see thank you
@diybandit 18 күн бұрын
Glad it helped!
@peachez510 20 күн бұрын
Curious if you had to order a kit that specifically opens from right to left? Did the guideblock come as-is or did you have to adjust it at all to allow the door to open in the direction that you wanted? Thanks!
@diybandit 18 күн бұрын
It was the standard kit. Not a special order. The guideblock you are referring to adjusts.
@ohforpetesakejohnson3892 20 күн бұрын
Mine is stuck and I didn't want to use force without some reassurance I was right about how they work.😅 Thank you!
@diybandit 18 күн бұрын
Been there!
@warrior-in-christ5717 20 күн бұрын
Thanks for the review. This was just what I was looking for to use with Google Photos.
@diybandit 18 күн бұрын
I know…can’t believe there aren’t more products out there that integrate with Google photos.
@warrior-in-christ5717 20 күн бұрын
Thanks for the review. This was just what I was looking for to use with Google Photos.
@gregoryjames1542 21 күн бұрын
How do you recommend getting a zipper unstuck from fabric from inside the bag lining?
@diybandit 18 күн бұрын
Get a tweezers and pull the fabric out as you unzip / zip?
@kevinyork4757 21 күн бұрын
I thought the water test had to be done for several hours to be sure. I have also seen where people say not to use putty on an acrylic shower pan... does a drain like this last for 30 years?
@diybandit 18 күн бұрын
Not a plumber so I’m not sure. Years later, not a single issue with leaks. Also my shower pan is fiberglass not acrylic
@dragon60651 22 күн бұрын
He knows that does not work that's why he didn't even hold it that long
@diybandit 22 күн бұрын
Wrong, pal!
@The_Original_Forrest_Trump 23 күн бұрын
It says it doesn’t work on leaks caused by rim issues, I have slow leak that I believe is a rim issue, can anyone comment on validity of this??
@simonpanter3627 23 күн бұрын
Nice job!! I just put one in today. I saw yours after the fact.
@NoName-eu4sz 23 күн бұрын
Can you install a vessel sink at the front edge of the counter? If not, why not? I have a mirror cabinet above and it takes too much from the depth of the sink, that's why I ask if the sink can be placed at the edge of the counter. Thank you!
@diybandit 18 күн бұрын
Don’t see why not as long as it aligns with the drain hole
@RubyRedDances 24 күн бұрын
If you cut an angled tip on the tube, that's small, you can get a nice clean bead without all that chaos.
@diybandit 24 күн бұрын
But I like chaos! Haha, appreciate the tip
@RubyRedDances 24 күн бұрын
Bro, your caulk application style is crazy. Scrubbing back and forth?
@marlagraff560 25 күн бұрын
Thank you so much! I was stumped !
@RashidharashiRashi-sf7fk 26 күн бұрын
❤ thanks for your video👏👏👏
@diybandit 24 күн бұрын
Welcome!
@tcbrenner2396 26 күн бұрын
Thanks for the video! Very vague instructions come with the lights so this was very helpful!
@diybandit 24 күн бұрын
I'm glad it was helpful!
@nohesi_xxz8 27 күн бұрын
Can u open the bottom of it?
@diybandit 18 күн бұрын
Bottom appears to be sealed
@torturedsilencegaming 27 күн бұрын
Why is the freezer temp on 1? I am having an issue with the same refrigerator, and it won't cool now. I changed both filters too. I don't feel any cool air coming out of the vents.
@maryraykatsuma3480 27 күн бұрын
Thank you for solving the mystery.