Пікірлер
@perlineburgess4633 5 сағат бұрын
It's going great. The steps are clear & easy to follow Thanks again
@bobpineo6376 5 күн бұрын
What's the part number of that gasket? These cars are built without a gasket, just sealant. I'd feel better with both.....
@steffdiesel4433 2 күн бұрын
Hi Bob your absolutely correct. I don’t remember the part number but I will find it and post it in another reply. Thanks for watching and commenting
@isaacpenilla8945 10 күн бұрын
Where was it leaking from that led you to change the gasket?
@isaacpenilla8945 10 күн бұрын
Here is a link to the pics of my oil pan area.
@steffdiesel4433 2 күн бұрын
Well I had several leaks but the one on the oil pan was coming from the curved area behind harmonic balancer.
@steffdiesel4433 2 күн бұрын
For some reason the link not showing up.
@KpxUrz5745 13 күн бұрын
What I like best is that nice back yard to work in.
@steffdiesel4433 2 күн бұрын
@@KpxUrz5745 Thank you I wish it was a little bigger.
@LeadrainPbH2O 18 күн бұрын
The latch is to release the nails already in it. You can pull it down to feed new nails in without the latch. Feels good.
@steffdiesel4433 2 күн бұрын
@@LeadrainPbH2O Thank you I was wondering what thar was for Thank you for watching and commenting to fill me with knowledge.
@MAGATRON-DESTROY 18 күн бұрын
Nice job 👍
@steffdiesel4433 18 күн бұрын
Thank you for the support. I really appreciate it
@steffdiesel4433 19 күн бұрын
Thanks for your comment and watching. I will definitely take that into consideration the next time. Some of my footage was some how lost/deleted which had the best explanation showing how I installed the first gable end and how I nailed it. Thanks again Happycamper
@happycamper4328 19 күн бұрын
Thanks for the info, i wish you have done a voiceover on the Timelapse part instead of that music though. 😊
@catchingzip Ай бұрын
Just passing through & i never comment, however, you did a fine job explaining as much information as needed to get going. Remember, this tool is way less expensive that the other yellow brand, red brand & blue brand that does exactly the same job.
@steffdiesel4433 2 күн бұрын
@@catchingzip Thank you I appreciate you stopping on in to leave this comment. Thanks you for watching . Your right the price it much cheaper and for the amount of time I add it it’s operating perfectly. I oil before every use abs only had it Jam once.
@tireehall161 Ай бұрын
👍🏿
@RevolutionPaulRon Ай бұрын
8:38 damn! I'll be using single fire lmao
@Busylady Ай бұрын
I purchased the same saw. I broke the lever on the safety guard also. The first piece of lumber cut like butter, but the safety guard flew off and hit me in the chest.
@definit98 Ай бұрын
You are right sir
@perlineburgess4633 Ай бұрын
Amazingly done, patiently constructed & precise
@perlineburgess4633 Ай бұрын
Great job
@mrbeansway1225 2 ай бұрын
That mainstays hugger ceiling fan that same my fan
@perlineburgess4633 2 ай бұрын
This was so good for us who is maintaining our vehicles....thanks for your teaching videos
@sharondaburgess8528 2 ай бұрын
You are doing a good job. Keep doing these videos 🎉🎉🎉🎉🎉
@steffdiesel4433 2 ай бұрын
@@sharondaburgess8528 Thank you. I really appreciate you.
@Carl_srt 2 ай бұрын
This video helped me ill never get rid of my Honda
@steffdiesel4433 2 ай бұрын
@@Carl_srt Thank you and happy it was helpful for you. I feel the same way.
@hwytravler1962 2 ай бұрын
Where did you get a discount coupon?
@steffdiesel4433 2 ай бұрын
@@hwytravler1962 At the time they had a promotional deal that specific weekend.
@shmackngreez843 2 ай бұрын
All my female employees need to see this.
@stefonburgesd306 2 ай бұрын
😂yes sir.
@steffdiesel4433 2 ай бұрын
@@shmackngreez843 yes sir it’s triple digits out there too
@darknet8664 2 ай бұрын
Great review Appreciate you takin the time to make it.
@steffdiesel4433 2 ай бұрын
@@darknet8664 Thank you. I appreciate you taking the time to watch it. I’m happy it was helpful for you.
@leeb.7188 2 ай бұрын
Yeah I definitely think that it’s better to go with Skil than Harbor Freight. After all, it’s the Skil Company that invented the “Skil saw” so they should know what they’re doing. My experience with HF has been to buy tools that I only need to use a few times but for anything I’m going to use a lot, go with a better brand. I bought the HF $20 recip saw to cut toilet bolts. It got them cut so I didn’t have to call a plumber and I’ve never used it again. So even if it craps out on me it was still a good deal for my one-time use.
@steffdiesel4433 2 ай бұрын
@@leeb.7188 yes, I totally agree. Sometimes you definitely have to shop around with different brands depending on the tool, the brand, what you will be using it for, how often you will use it, and finally the price. Thanks for watching and leaving a comment. I really appreciate it.
@gunnerzane5230 2 ай бұрын
Very helpful, is it still going strong? PS: You have a nice home and yard..
@steffdiesel4433 2 ай бұрын
@@gunnerzane5230 Well yes the flood light seems to be holding up for the most part. Something you have to reset it. I don’t like that part because I have to get the ladder and everything but it’s good. On the other hand I installed the bing doorbell at the same time and I’m not having great luck at all. It stopped powering up a few weeks ago. Thank you for watching and commenting I really appreciate it.
@nealieburgess6930 2 ай бұрын
Keep it up you're doing an amazing job
@steffdiesel4433 2 ай бұрын
Thank you! Will do!
@maryholly9830 3 ай бұрын
Great work ‼️
@steffdiesel4433 2 ай бұрын
Thanks 💯
@wesmckean1443 3 ай бұрын
Thanks for the review. I'm looking at this to help cut my LVP. Should be perfect for that. I don't need an expensive saw. Just one that gets the job done.
@steffdiesel4433 2 ай бұрын
@@wesmckean1443 Totally understandable. When I purchased it I really only had one use at the moment for it and it performed perfectly for what I needed it for. The only thing I would suggest when using it is to make sure the front and back of the fence is the same distance from the blade so you ensure your cuts are pretty much straight. Thanks for watching and hope it was helpful for you.
@steffdiesel4433 3 ай бұрын
gofund.me/d174d10f
@willbass2869 3 ай бұрын
Roof sheathing... "C"clamps....and rope
@steffdiesel4433 3 ай бұрын
@@willbass2869 that’s right it will get the job done
@estellam3231 3 ай бұрын
Keep up the great work
@steffdiesel4433 3 ай бұрын
@@estellam3231 thank you. It’s slowly getting done
@perlineburgess4633 3 ай бұрын
Loved it...
@sharondaburgess8528 3 ай бұрын
❤❤
@steffdiesel4433 3 ай бұрын
@@perlineburgess4633 well thank you. It’s coming along
@steffdiesel4433 3 ай бұрын
@@perlineburgess4633 well thank you. It’s coming along
@nealieburgess6930 3 ай бұрын
Doing a great job
@steffdiesel4433 3 ай бұрын
@@nealieburgess6930 thank you. I’m trying to get it done.
@malcolm4k270 3 ай бұрын
I’m new to woodworking so far I got a dewalt corded jigsaw and a Rockwell blade runner. Should I get a circular saw or table saw?
@steffdiesel4433 3 ай бұрын
@@malcolm4k270 I don’t know your need, but for me I would get a circular saw before the table saw. My reason is for most small projects I’ll use my circular saw. It’s more versatile and convenient. But it mainly depends on the type work your going to be doing. Hope that helped
@icyviolator5536 3 ай бұрын
You had me at the beginning. I was looking at this same saw at HF just today. You brought GOD into the mix. It's a rap. Like and Subscribe just off GP. Continue...
@steffdiesel4433 3 ай бұрын
@@icyviolator5536 ohh yeah I have to thank God. Thank you I really appreciate it.
@steffdiesel4433 3 ай бұрын
www.gofundme.com/changing-the-trajectory-of-my-future
@dangrimes5078 3 ай бұрын
You may not be a professional but you did a good job!
@dangrimes5078 3 ай бұрын
The very last step is dropping it in the dumpster and go get a different saw.
@steffdiesel4433 3 ай бұрын
@@dangrimes5078 lol 😂 I understand.
@francoisen6755 3 ай бұрын
But how to you put in those screws it came with? How do you get them to stay?
@steffdiesel4433 3 ай бұрын
@@francoisen6755 I’m not sure. I don’t recall mine coming with any screws.
@ice4278 3 ай бұрын
Well-being honest, you started out.Good explaining everything and at the end about ten to fifteen minutes no video. I know you say the Video was getting too long but break it up in part 2 3 4. I don't think too many people wanna see a fast.Moving scene with no explanation on watching building a shed.When that is what they might be wanting to do. To be honest , it was very boring with the fast moving scenes. I'll give you a thumb up for building it.But not for showing other people how to build the whole thing.
@steffdiesel4433 3 ай бұрын
@@ice4278 Thanks for the feedback. Your absolutely correct I will do a better job of breaking the videos us and more explanation in the future she’d build videos. Thanks
@kova_tech 3 ай бұрын
Thanks for the review - Just ordered one on Amazon
@steffdiesel4433 3 ай бұрын
@@kova_tech Thanks for watching. Have you used yours yet? If so how do you like it
@steffdiesel4433 3 ай бұрын
Link to my GOFUNDME: gofund.me/6bf5cc25
@steffdiesel4433 3 ай бұрын
Link to my GOFUNDME: gofund.me/6bf5cc25
@DonaldMang 4 ай бұрын
The new Briggs & Stratton plastic carburetors, are the worst, for having too small a main jet holes!!! I broke off 2 bits (the one's with colors). Just last night I got a set of bits & vice just like yours. Comes with color bits and 3 bags of bits for the vice. The bag with the thinnest bits is just what you need. Bring on the plastic carbs, I can do it now!!
@steffdiesel4433 3 ай бұрын
@@DonaldMang it’s extremely easy to break those tiny bits. I touch one and the tip broke off in my finger. I also bro one off in a different carburetor I was working on and had to drill it a little bigger that I wanted to get it out.
@Krypton48911 4 ай бұрын
Thank you that was so helpful, even though we had a different fan (A Goodwill special with no instructions).
@steffdiesel4433 3 ай бұрын
@@Krypton48911 Thanks for watching and happy it was helpful for you. My favorite stores goodwill and habitat for humanity. Love them. Thanks again
@dangrimes5078 4 ай бұрын
I guess you can't expect much for $150. I just bought it for a one time use.
@steffdiesel4433 3 ай бұрын
@@dangrimes5078 What happened?
@dangrimes5078 3 ай бұрын
@@steffdiesel4433The fence angled toward the blade. When I tried to rip a piece of window trim I could barely push it through. It was burnt on the cut edge from all the heat from the side of the blade rubbing. Besides that it was so loud It sounded like it was going to explode. I took it back and I bought a DeWalt 8 1/2" table saw. I happy with it.
@steffdiesel4433 3 ай бұрын
@@dangrimes5078 you might have just inspired me to get one and try it out. Look forward to a video coming soon. Thanks.
@dangrimes5078 3 ай бұрын
@@steffdiesel4433 The Skil 10" is less money and very good from everything I heard. I knew about the Skil but bought DeWalt anyway. I'm not sure why.
@steffdiesel4433 3 ай бұрын
@@dangrimes5078 I want to try the dewalt too
@wchamp223 4 ай бұрын
Thanks bro. I appreciate you going through all the steps to show us how to use this table saw.
@steffdiesel4433 3 ай бұрын
@@wchamp223 Thanks for watching and happy it was helpful for you
@LesterBricks 4 ай бұрын
Keep it up man! Gotta start somewhere.
@steffdiesel4433 3 ай бұрын
@@LesterBricks Thanks for watching and the inspiration man ❤️
@thebrokeway9838 4 ай бұрын
Thanks mate
@steffdiesel4433 3 ай бұрын
@@thebrokeway9838 Thanks for watching.
@danalevy7793 4 ай бұрын
Great video! Very helpful! I just bought and have the same situation but I’m close enough to an outlet I don’t have to install one.
@steffdiesel4433 2 ай бұрын
@@danalevy7793 Thanks for watching and commenting. I’m happy it was helpful for you. Your good to go. I think they sell like a power extension cord specifically for the light if that would be a better install than using a traditional extension cord as I have. Thanks again and keep me informed how your install go.
@morenito0530 4 ай бұрын
This Video is for The EZ - Brace 101 or not. The bracket is for a electrical box that is plastic. You already have a metal box . You won’t be able to screw it in metal box.