Please screen replace my c dry pump overheat it. Took it apart. The exhaust, too, was not really confident. How it was in what all knew pull it back together. I know that is right, and my boat's still overheat news Army stat to one riser off. Look a little rough, but wasn't blocked. Didn't check manifold. I just wonder if anybody knows about the power steering are the oil core.Do they clog up😅
@retiredboxmanboxmaker69737 күн бұрын
Thanks for sharing nice to have someone share what they go through that is not a pro. I did mine and same problems with side panels 😂 maybe one day the designer will have to install what they come up with 😅. And yep I’m a retired designer. Thanks again!
@AchikSarih12 күн бұрын
Merci beaucoup ❤❤❤❤❤❤❤❤
@jasongarfias165514 күн бұрын
what if the squeaking noise was only there for about 5 miles then went away?
@tonycloud658815 күн бұрын
Did everything else work but the sonar?
@ProWrenching15 күн бұрын
@@tonycloud6588 yes
@tonycloud658815 күн бұрын
@@ProWrenching that's what mine is doing , shows it's 1200ft deep in 4ft of water and black screen but temp and stuff works
@tonycloud658815 күн бұрын
I plugged in my old finder and it worked fine so i know my transducer is ok@@ProWrenching
@ProWrenching15 күн бұрын
@@tonycloud6588 mine is still working great after making that repair. Planning to use it in my kids’ high school fishing tournament this weekend
@tonycloud658814 күн бұрын
Unfortunately that's not my issue, only thing it says is connected is the gps @@ProWrenching
@fvgc454ss16 күн бұрын
Part number on the sending unit?
@ProWrenching16 күн бұрын
sending unit (PAID LINK): amzn.to/3oVW9ty DISCLOSURE: As an Amazon Associate I earn from qualifying purchases.
@day2xs20817 күн бұрын
I have a 1992 ranger 363v. My live wells automatically fill up on me and I don’t want that. Does this help with that?
@ProWrenching17 күн бұрын
@@day2xs208 this livewell setup has 3 positions-auto empty and recirculation. If you turn the valve to recirculation mode before you launch the boat and get on the water then your live wells won’t fill up.
@day2xs20817 күн бұрын
@@ProWrenching thank you I appreciate your help
@Quiet_duck19 күн бұрын
FISH
@seanc.366620 күн бұрын
Not the main fuel lines that connect to fuel bowl, but where does the small lines that go to the front jets connect to? I inherited boat, rebuilt carbs with help of your video but It came with no lines connected to the small barbs.
@augustrobinson81429 күн бұрын
I linked and synced after I rebuilt the carbs off your other video.. Worked perfectly.. The only problem I have now is getting the timing advanced in the correct position when shifting either from forward or into reverse the motor just dies.. It will start and idle perfectly but as soon as I push or pull into gear it stalls out.. Do you know how to set the timing advance to accelerate while shifting gears.. I may have the cam not set correctly on the carburetors.. Mine is a 1988 black max 150hp..
@ProWrenching23 күн бұрын
Adjust the idle up so the RPM's are 750, while in gear.
@eggfueggfuu74829 күн бұрын
Thank man I’m getting ready to the exact same thing kicker included. Great video thanks
@longsword196929 күн бұрын
Who's brilliant idea was it to play that loud cringy music can't understand a word your saying
@20rndzАй бұрын
What size is that bolt? 1 1/16?
@ProWrenching29 күн бұрын
@@20rndz yes
@JulyiersRusАй бұрын
Would this be the same process for the 175?
@ProWrenchingАй бұрын
@@JulyiersRus this is a 1994 motor. As long as it’s around the same vintage, it should be about the same.
@chetchelios3574Ай бұрын
Those plugs were bonded. Lol 😂 good video . Thank you. Have to change my fortrex head. Busted it all too hell.
@banafshemousavi1105Ай бұрын
Heaven❤
@matroxАй бұрын
Looks like its got a bad case of arthritis.😓
@ericlawson5263Ай бұрын
This is so awesome. I have the exact same motor in my 1985 Say Ray Sundancer 260. I'm about to replace my risers and manifolds - and this is invaluable for figuring out how to do it.
@ProWrenchingАй бұрын
@@ericlawson5263 that’s good to hear- great boat! I’ve been enjoying mine. I think with maintenance these things will run forever. Thanks for your comment.
@Alexanderbuilds2001Ай бұрын
What about the transmission fluid that drained from the lines?
@ProWrenchingАй бұрын
@@Alexanderbuilds2001 transmission fluid will need to be added
@methods-SEАй бұрын
The commutator on the new motor looks very different than the old motor. I've got a 30 lb, and my armature looks like your old armature. Do you know anything about a change?
@ProWrenchingАй бұрын
No- I don't know about a change. We'll leave this here and maybe one of my viewers will drop a comment if they are aware of a change.
@Alpha1Omega20Ай бұрын
What about the light?
@ProWrenchingАй бұрын
@@Alpha1Omega20 are you asking about the gauge illumination at night?
@cameronleaana1153Ай бұрын
Your anoying music is too loud to hear you
@DrBobcfАй бұрын
Does the seasoning depend on the engine it belongs on?
@advancedwarlord1802Ай бұрын
Yes you want to make sure you use herbs if it's Italian and soy sauce if it's from a Japanese car
@unfittingsteak3-755Ай бұрын
Little creole and you'll be good for most US domestics
@spRas_Ай бұрын
So, is that considered medium or medium rare?
@ProWrenchingАй бұрын
@@spRas_ lol! looking for 450 degrees, well done
@ggggg895hungaryАй бұрын
What if the pads are new and rhe disc too but still have this noise ??
@djl2033Ай бұрын
your's is L bent at float..how did you get that way?
@ProWrenchingАй бұрын
@@djl2033 it came that way
@ursadc7Ай бұрын
Gorgeous super duty. I have a 01 v8 triton f250 myself. How's yours treating you?
@ProWrenchingАй бұрын
@@ursadc7 it has been an awesome truck. It’s a bit thirsty and I had to replace a transmission but other than that it has been great. That’s a solid engine-don’t have to worry about the variable cam issues that they have in the later models
@jamainethomas8760Ай бұрын
Thanks for the video. Gave me the gusto needed to replace my horns on a 2004 f250 due to fuse kept blowing. I didn't take the whole liner apart just near the front and bend it back so I could stick my hand up and pull out the horns. Also have the new horns using the original connector. Thanks again
@ProWrenchingАй бұрын
@@jamainethomas8760 awesome! Glad my video was helpful.
@Supanova70Ай бұрын
thought this was going to be testing the actual resistance on the sender. That`s what i was looking for.
@H20PowashАй бұрын
Very helpful video! But what’s the bracket size did you get? I’m getting mine as well. Same RV and truck
@ProWrenchingАй бұрын
I'll have to ask Pat next time I see him!
@sparkplugtestingkitАй бұрын
Very dangerous!
@ProWrenchingАй бұрын
Videos coming soon- Subscribe!
@BradleyFennukАй бұрын
My mechanic and I followed the Instructions with the exact same parts that you have in the video and once installed back on the boat, the propeller does not spin freely when the gear shifter is in neutral. I believe that it should. I dont want to start the engine and cause damage if something is not working correctly. We checked the shifter on the outdrive and everything seems to be in its proper place. Thank you
@ProWrenchingАй бұрын
@@BradleyFennuk check your cable adjustments and make sure they’re correct. If you are still having issues, I would call SEI. You may be having a problem with the drive.
@FrankC76Ай бұрын
Loved this video. Best one on this topic I have found by far. I recently purchased a 25 year old Searay 190 with a 5.0 Mercruiser and removing and inspecting the risers/manifolds is my first order of business.The stud trick is genius and I would never have thought of that on my own.
@ProWrenchingАй бұрын
@@FrankC76 yes, sir- awesome! Thanks for your comment and good luck with your project
@MrTkoedelАй бұрын
Shouldn't you rotate your tires while greasing to spread evenly in bearing?
@ProWrenchingАй бұрын
@@MrTkoedel it’s not necessary, but it also doesnt hurt if you want to do that.
@MrTuskahomaАй бұрын
Ford....WHY not have them behind the grill!!!!
@ProWrenchingАй бұрын
@@MrTuskahoma absolutely. It is a strange place to put a horn.
@ProWrenchingАй бұрын
switch (PAID LINK): www.ebay.com/itm/301714319517?mkcid=1&mkrid=711-53200-19255-0&siteid=0&campid=5338769118&customid=&toolid=10001&mkevt=1 DISCLOSURE: If you choose to purchase through the provided link, I will earn a small commission at no extra charge to you.
@CitedFujitsu2 ай бұрын
3 years on and your video is still helping people. Cheers mate, you made my life easier 👏
@ProWrenching2 ай бұрын
@@CitedFujitsu Heck yeah- thank you! Glad people are still finding my video useful.
@Xandertank20102 ай бұрын
and does it sound even when you are not breaking?
@adamalander75152 ай бұрын
I have a vintage 70's Merc Thunderbolt 50HP 2 stroke 4 cylinder that I rebuilt and got running, but it idles very high in neutral!. Anyone know what I need to adjust to get it to idle like this one does in neutral?. I was thinking it could maybe be the cable that comes from the Mercontrol/throttle and choke, and maybe I need to adjust one of the stop screws on the side?, and I know one does timing so I just need to know which one to adjust so I don't accidentally end up screwing up the timing!?. Any advice would be very much appreciated!. I want to go on the water, but I can't because I know if I put it in gear with it idling that high that it'll be bad news bear! lol
@walkertonheights2 ай бұрын
When you are disassembly , I seen the very large silver washer behind the diaphragm (merc 16496) was stuck in there pretty good. Do you think that is why your poppet valve was failed?
@ProWrenching2 ай бұрын
@@walkertonheights The poppet valve didn’t fail on me, luckily. I was doing preventative maintenance b/c the engine is 30 years old. Thanks for watching the video- I appreciate your comment!
@jasonfujioka2 ай бұрын
Thank you so much for sharing your videos! I’m new to a used Merc 135HP and rebuilt my own carburetors thanks to you, great to link and sync also. It wasn’t my issue for high end, I replaced the power packs and just hit 49MPH today before I was maxing out at 31MPH
@ProWrenching2 ай бұрын
@@jasonfujioka Awesome improvement! It’s cool to hear the real world feedback. Glad you found the videos useful.
@ashtonhenderson87412 ай бұрын
How do I find the double flow rite panel? I can’t find it anywhere on the internet
@ProWrenching2 ай бұрын
@@ashtonhenderson8741 I bought it from Ranger parts dept.
@ProWrenching2 ай бұрын
PAID LINK: amzn.to/3SpbsX5 DISCLOSURE: As an Amazon Associate I earn from qualifying purchases.
@dannyw30202 ай бұрын
Where did you get that replacement switch from?
@ProWrenching2 ай бұрын
PAID LINK: amzn.to/3SpbsX5 DISCLOSURE: As an Amazon Associate I earn from qualifying purchases.
@johnscholl83912 ай бұрын
Nice man, thank you
@stewpeterson33312 ай бұрын
Greetings again PW! -- Pulled my poppet valve and doing the rebuild. Did you ever find a function for the thick black washer/ring you are holding at 14:44? I have the same piece and not sure where it's needed. Thanks, Stew
@ProWrenching2 ай бұрын
Hi Stew- that ring is the carrier. I ordered all the parts for the job, but after I inspected the existing carrier, I decided that was in good condition and decided not to replace it. The carrier sits inside the engine block.
@christopherhealy15542 ай бұрын
Your original roller was probably smaller when first made, overtime rubber cracks and can expand with heat. I bet if your old one wasn't cracked, it may be a lot closer in size to that new one.
@exquisitehomes2 ай бұрын
Hi, Can I just replace just the Gimbal and not the seal? or is i recommended to replace both?
@ProWrenching2 ай бұрын
I would check the seal and if it's in good condition, I wouldn't mess with it. If the seal is in poor condition, I would change it out
@exquisitehomes2 ай бұрын
@@ProWrenching Appreciate it. Thanks for the reply