I saved both calibration files. The 90 deg file is for home theater with mic facing up. You should measure individually as the adjustments are separate for each channel.

@@Hifihobby Ok, merci !

And price are not too expensive considering the quality too 👍🏼

Agreed, i live in UK but i do shopping from amazon jp as these cables are also available online. Here it is crazy expensive, 3 times more easily….

The big number is the price including tax. Just below and left of it is the price before tax. If I’m not mistaken the top right is the price when new.

The built in Eversolo room correction is easier to use but doesn’t allow you to upload the target curve and has limited range. I have another video on using the built in system

@@Hifihobby Merci, je vais essayer la différence avec REW ! 😉

Let us know how it goes 👍🏼

@@Hifihobby Ok ! 😉

✌️😁

Thanks for watching 😁

You are welcome. Thanks for subscribing to my channel

Warranty is supposed to be void if you open it. There is no warranty seal on the unit though.

@@Hifihobby Ils ont peut être un autre moyen de savoir si l'appareil a été ouvert, ce serait très simple à réaliser ! 😉

Many people have upgraded the LPS for the A6 and this is rather new for the A8. There’s no need for the upgrade if you are not comfortable with it.

@@Hifihobby C'est les doigts dans le nez, et les yeux fermés que je peux faire cette manip, ma question ne porte que sur l'hypothèse de la garantie !

👍🏼

You can try connect the mic to the Eversolo and phone see if it appears?

is there any driver for the umik-1 to install on the DMP-A8 ?

There’s no driver for the microphone.

@@Hifihobby My phone microphone appears (on my phone Eversolo app) but not on the DMP-A8 itself .. And the umik-1 does not appear on my phone or on my DMP-A8. On my dmp-A8, a message appears "no microphone found"

Does it work when you connect to the phone and you use the Eversolo app? Did you connect to the correct USB input ? Is there light on the mic to indicate it’s connected?

You’re welcome. Share your findings after trying out the Eversolo Room Correction. I got better results using REW (video guide on my channel) so you might want to give that a try as well

@@Hifihobby Used the room correction to set up four settings: 1) full frequency at listening chair, 2) low frequency at listening chair, 3) full frequency at desk, and 4) low frequency at desk. The listening chair was sort of optimized by randomly moving around the speakers. But the room correction helped bring out details. Didn't really like the full-range room correction, changed the feel of the speakers too much. But the low-frequency correction was really eye (or ear) opening. Like you say, it's sort of hard to see on the Eversolo screen, but there were big 10db bumps in the bass response before correction. The room correction smoothed them out quite a bit. At the desk (which is not in an optimized position), it was like night and day before and after correction. Really thankful for that as I sit more often at the desk than in the dedicated listening chair. It sounds so much clearer. It was surprising how the "flat" frequency response sounds off. I had always thought that was the holy grail. Applying a bit of the bass boost like you showed helped. Instead of +4db, I went with +2.5db. But it's only been a day, I'll keep playing around with it in the coming weeks. For sure have watched your helpful REW video already. Will give that a shot in a few weeks. But for now going to try experimenting with the Eversolo built-in capabilities. I also like how it's easy to toggle the DSP on and off and if I'm moving from the desk to the listening chair, it's easy just to hit one button. After being in this hobby for over thirty years, and spending hours moving things around, researching capacitor or speaker wire upgrades, I don't believe that I didn't give DSP a try earlier!! This is a huge tool. Thanks again for the video, I would have been lost without it. Without it I would have probably used the room correction to flatten everything and thought it was broken because the flat curve really sounds wrong for some reason.

@edwinwong9547 Great to hear that you found the video helpful. My preference is to optimize the speaker placement first then the room correction to just for final correction of bass. You can also give a try for the REW as well, it gives far more information and you can upload the target curves. Let me know how it goes 👍🏼

Have not had a chance to do a side by side comparison with the A10 yet

Hmmm so far I don’t get this issue: any idea what caused it?

Update: I did the factory reset. Ran a straight spectrum using only my main speakers. Worked fine. When I added my Subs back in it started crashing again. So it's fine I can run without the subs included and then do the freq spectrums on them individually.

@@Hifihobby I do now :)

Kinda strange how running the sub causes it to crash tho

It was output from the preamp output from Eversolo.

@ what frequency are they crossed over at ?

Yes you can connect the computer to the USB input on the Eversolo

That is the Davone Studio speakers

@@Hifihobby Thank you so much, I found them online. They look awesome.

@itslessfunincanada No worries! Thanks for subscribing 👍

It’s a messy job because you basically have to remove all the circuit boards. I’m now using isolation feet below the Eversolo and it woking well

The feet are screwn from the inside of the A8? No way to remove the rubber layer underneath the feet? That's a pity. I don't understand why manufactures don't spend these 3-5 € more to install proper aluminum feet...

@KurtKugler-f2x I tried to remove the rubber part of the feet but was not able to do so easily and was afraid of damaging it.

Good point! Do check before purchase.

Thanks for watching 👍🏼

Thanks for watching 👍🏼

Thanks for subscribing but who’s Kenrick?

Thanks for supporting my channel. 😀

@Hifihobby no worries You are very welcome 😊

I have an updated video coming up next week. Subscribe to be notified when it’s out!

the thinf about these hifi fever is. equalizing them thru these scientific equipments. but you can achieve all these thru EQUALIZER AND PROCESSORS.

If you want to do that way you can run DSP like REW and adjust the frequency response to your preference.

😆

Thanks for subscribing 👍🏼

Yes Acoustic Energy speaker was very good sound for the money and I think it was made in Malaysia if I’m not mistaken. You can drop by and visit the store again soon don’t need to wait for 30 years 😆 Thanks for subscribing and supporting my channel

Hey there. There’s no DSP chip in the A6 so it can’t perform the built in Eversolo Room Correction. You can use REW with the A6 and adjust the PEQ manually. Let us know how it goes 👍🏼

@@Hifihobby I finally decided to get an A8 :) It just fits in my shelf. I already ordered an UMIK-1 mic and hopefully the measurement for the bass domain will work out as smoothly as you showed it in your great video. I will give it a try with REW :)

@KurtKugler-k8h 👍🏼 how are you liking the A8 so far?

Thanks for sharing. You are probably right about the rental cost and Audio Salon does have by far the widest selection.

It had nice music playing but I had to remove it due to KZbin copyright block

Absolutely! Thanks for subscribing ❤️

It’s mentioned as Made in Japan.

Why not? Have you had personal bad experiences with the quality?

Have fun! 🤩

I’ve got a couple of videos on Yodobashi Camera on my channel as well. It’s the geek heaven 😁

It’s what it is. I don’t set the prices. Thanks for watching 👍🏼

Interesting! Thanks for sharing 👍🏼

Thanks for sharing, I forgot to mention it. But Yodobashi and Bic Camera won’t assemble the cable for you right?

so it is a nice shop for DIYers😃

Or if you want to mix and match different connectors and cables

Yes you are correct. They sound great too 👍

I overestimated my mental ability to video and perform multi currency conversion. 🤦‍♂️

Address is in the video description

Thanks for watching 😁👍🏼

Super 👍 Thanks for your support

Thanks for your watching 👍🏼 Check out more videos on my channel

Japan have high standards of cleanliness and consideration for others.

You’re welcome ! Check out my other videos as well 👌🏼

Thanks for subscribing 👍🏼

I didn’t happen to see this model when I was there.