Opel Machine 🦾

Id love to see a decibel reading. I bet it's well over 100db

Did it have any mufflers/resonators and a cat or just a raw piece of pipe all the way to the back?

Full system ?

Hi there just seeing if ya can't. Lost my transmitter for buggy. Not sure what transmitter to bye an how to bond it back to buggy any help would be much appreciated.

Change the inlet pipe for a slightly bigger one, these engines easily do 66+ bhp

Hi. An electric fan: what a clever idea! This is the first electric fan modification that i see on a nitro RC. Normally, we should not have to do that since a good tuning is supposed to provide enough cooling. However, i bash my eb4 in taller grass and the engine has to work substantially harder and therefire gets hotter. Not the best thing to do with a nitro. But a cooling fan modification like yours could help preventing the engine to overheat and cease. In your build, is the electric fan always on or somehow controlled by a temperature switch mounted on the engine? How efficient is the cooling?

The TU is a really good engine. Might blow a headgasket but just replace it without metalwork and you're good to go. Also, a healthy 1.1 is usually >60 hp so probably you gained nothing with the mods.

Nice one Mr, Dont go and bloody crash it....😄 Greetings from Islas Canarias....🌴

One time the mid section had detatched it'self from the backbox and the only thing holding it on was rusty welds so had to take it off so it didn't fall off when driving. It was running from just the front box and by heck it was sounded there was a 3 inch fart cannon underneath me and couldn't take it past 3,000 rpm because it was so loud. Fumes were coming into the cabin too

My tt eb4 2s wont go into gear and the front wheels wont spin with back wheels. Any help???

Oh yes EB4 owns it 😁

Solid effort mate

Hi :) where do you find spares for those? things like hubs, arms, diff gears. Thanks!

Hi, I have a 90 quattro 20v but with the NM engine 1996cc with 160 bhp at 6200rpm and 200nm at 4500rpm, love the sound of it and bought because a few years back I had a Coupe quattro 20v also with that same engine. Did love the engine sound of yours to, I will check your channel.

fun vid

WOT soundcheck 23:04 onwards...

Great video I've just got a thunder tiger eb4 s3 with no engine what do you think would be the best replacement nitro engine the force 28 or the lrp 28 or the Dynamite big red 28

What pull start did you use i searched up the standard but that one is sold out everywhere

Quoi comme ligne

Going for the big red I've got a hpi trophy nitro I upgraded all diffs from the electric flux hardened steel gear's it's got a lrp 30 spec 2 engine it's a beast

Hi I've been into rc nitro and electric I've just been given a thunder tiger eb4 s3 with no engine do you think the force 28 engine would be good or what other engine might be better i put a force 36r and it smashed all transmission this was years ago i don't want a engine thats going to do the diffs etc because of to much power great video

Love it mate, seems well sorted. Had a 90 2.2e 10v with the KV engine for a few months and just tidying it up. The bilsteins: are they B4 or ? Had a couple of T5s in the past and basically bought this for the 5 pot sound and scratch the old school Audi itch😀

Hello Sir, I stopped watching when I jumped off my chair when you dry fired your air rifle. It absolutely amazes me. When you've gone to all the trouble to restore your air rifle, you then go and shoot it without a pellet inside the barrel. The pellet provides a resistance for your piston as it belts through the compression chamber, eventually propelling the pellet, where the piston comes to a stop. No pellet means no resistance for the piston, meaning it will smash against the onside of the transfer port ruining the internals. However, on the bright side, you know how to restore your rifle, it'll just require doing again. One thing you never, ever do if you look after your air rifles, is fire them without a pellet. Good luck for the remainder of your show.

Sounds amazing, I have a couple quattro with the kv engine that's seized ,but I do have a 20v 7a ready to be fitted when I get the time lol . Watching this is motivation me to get my ass in gear. Thanks for the vid👍

I love the thunder tiger make I had s2.5 version but the only flaw was the pullstart that kept breaking which was very frustrating

Where did you get your pipe from mate??

What’s been done to this ?

What dis you do with it?

I bought an EB4 S3 Buggy in PERFECT Condition the other day "Never Used" with Radio Gear for $40.00 Au. It looks amazing in brand new condition. The Original Owner did not know anythng about the Car or how to use it.

what does the breather filter do?

A question I have is this. I thought we could use our sub 12ft air rifles/pistols inside our home if the garden doesn’t qualify. What’s your thoughts on this? Is it allowed?

Hello friend, what diameter are the exhaust tails on the outside?

Would like to upgrade my starter to an e start aswell. Think it would be easier too.

Great vid very very helpful. I too have the same issue with the one way bearing and frightened to have the experiance with buying one that doesn't last. I can't find the pull start king anywhere. Any idea where i could get a good replacement please tyvm.

HI I have a EB4 S2 its running the Pro 21R engine. I am looking for a pull start, my one way bearing is 14mm and fits shaft off 8mm most off the pull starts come with 12mm one way bearings to fit 6mm shaft. Also its flywheel is to far away from the chassis for most starter boxes is there a slightly larger diameter flywheel for this?

hello do you have the reference of the new Launcher you have installed? Thank you for your reply.

the engine broke in does not mater about temp

I heard you say rally car style 😮😂

Ayy up crazey you still running the thunder tiger eb4s captain 👍☝😎

these are the fastest ever stock nitro buggys

I have the same car and I love it I did a few upgrades to it to make it little bit faster but man I love it

Can't find the pull start king on ebay 😪 not that I need one yet but my lad came home with a eb4 s3 yesterday he got a pretty good deal 80 quid works well but does have a fuel leak at the top of the tank where the outlet nipple is ..so will have to seal that somehow...brilliant videos on the cars btw

I have an old car that currently being converted to track car, I'm planning to get this audi 90 IMSA GTO livery. How did you do it?

I have an EB4 S2 with a cracked fuel tank. I cant find a replacement, can you tell me if you think the S3 tank could be fit on the S2?

Nice little car, lucky move. 4efe is the same engine as starlet, glanza etc. E11 3 door just looks pretty cool.

I've just been gifted an eb4 MK1 I think, that needs some TLC. Now thanks to your video I know it's going to be a mission for parts ect. I think I'll do a complete rebuild, already I've noticed the E clip on the A arms are missing. Any chance I can pick your brain if I come across any issues. There doesn't seem to be much on these cars well in depth just little run videos. Would doing an electric conversion be a better option? As I'm not really into nitro.

There both nice thunder tiger eb buggies motors sound good 👍

That's a nice thunder tiger eb sounds good 👍

👍🏽