You have to take measurements on all 6 sides, not just the one, then you can get a better idea of the tolerances, but remember the wrenches are not made with a milling machine.
@stewart81276 күн бұрын
Thank you
@joelthomas382312 күн бұрын
Thank you for the video.👍
@wg764413 күн бұрын
This 34" bracket is so good because it is wide enough to span 3 16" stud spaces so that you can attach it to 3 studs and therefore it becomes an adjustable offset tv mounting bracket. Because of stud placement in my living room when I went with a smaller width bracket I couldn't cheat enough to have the TV centered on the 13'6" wall because in the very center of the wall was a stud. If I had used a bracket that only spanned 2 studs I couldn't cheat or slide the tv towards the center. With the HF 34" wide bracked I didn't have to cheat at all because it spanned across the center stud and attached to the adjacent studs. $21.00 for it and the 65" tv looks fantastic. This is a 30 minute job to 60 min. Have a phillips screwdriver that is 15 or so inches long, a 4ft level helps, mechanical pencil with erasure. 5/32" drill bit. ratchet and socket to screw in lag bolts to the studs. The TV literally hangs on the upper bracket as the bottom philip scres just keep it from coming off the top bracket rail and falling off the wall.
@xephael348521 күн бұрын
You still alive and doing well? Loved your videos when you were posting them...
@liambreuner482129 күн бұрын
Pb Swiss is Swiss, wera is Made in chzech Republic and wiha in Vietnam. At least thats what i think is the Case. doesnt make them worse, but Not quite German.
@ronaldford2369Ай бұрын
Very WELL DONE Video Loved the tool inventory!
@coltgun8762 ай бұрын
Store shine ain't as good as man-made.
@stephengiacobozzi77852 ай бұрын
Black& decker own craftsman Bolt now
@ikkiiiieee2 ай бұрын
Would the smaller HDPE plastic 10933 with the plastic inners be good for thinners/hydrocarbons? As WD40 is like half hydrocarbon/thinner. Worried about evaporation and degrading of the plastic
@MrJasonbusch3 ай бұрын
I did all that and still I'm having problems with my battery charging
@kaden72983 ай бұрын
At the front right of the miter handle adjustment. There is a little switch that move back and forth. It will lock saw in chop saw without having to tighten that knob at back of saw. 😉
@rollinthrulife4 ай бұрын
Thanks for showing me about that stabilizer bar on the back side! I wasn't sure what it was or it went and you're one of the few videos that actually showed that so kudos! 0:11
@desertdweller95484 ай бұрын
Congrats you got much more back drag and probably Chinese parts. Pathetic.
@igormorningstar4 ай бұрын
I understand you didnt know but i grew up in the town where wilde has their factory, its pronounced like "wild e"
@chrisdowell32434 ай бұрын
Good video the white batteries have. Lasted 8 or 9 years. I have 5 a attachments thanks
@PrimeToolbox5 ай бұрын
I usually go with Knipex, but I've taken one of these Western Forge to play with. The USA used to make great stuff (and still do it if you have the money to pay for Snap On tier).
@MyKnifeJourney5 ай бұрын
I like how they look different than other sockets. It is easier to locate and less likely to roll away
@betmon59865 ай бұрын
I have gone there a couple handfuls of times and I have always taken no less than 3 grand to spend there and I tell you brothers I’ve spent it all each time coming out wit a truck load of hand tools and other stuff and equipment
@nothankyou55246 ай бұрын
Anyone watching this, this guy aint no chemist, and he certainly aint no mathematician. Proof that 50/50 is wrong only takes eyeballs. The proof that theres a 2nd reason hes wring takes a pencil and a piece of paper. Good luck..
@akeelshah79046 ай бұрын
Ordered a pair I'll let you know if mapp gas and these pliers removes a bolt that snapped in half for my abs sensor
@tyhust40816 ай бұрын
Why would you want cable driven rather than wire driven and bring the tach module and the gas pedal assembly. I’m no pro but just watched a few videos explaining the pro of the wire over the cable
@FAFO19847 ай бұрын
I'm hoping a coil pack is my issue. My 06 is running like crap. Flashing engine light and all. It started when i goosed or a few days ago and now it just keeps missing. Today is the 3rd day and it's way worse than it was the first 2 days. Just trying to make it to Friday.
@scottburrows70897 ай бұрын
Too many Shits & Fucks in this. I can say it too - but have a bit of class if you’re gonna duck around with this shit
@loganwork70247 ай бұрын
It makes me sad seeing everyone talk about how these were $25 and sold by lots of bands. Only 6 years and theyve doubled in price, sold by wilde or channel lock
@ccolagio_7 ай бұрын
For what its worth - I just measured my 2mm bondhus standard issue hex L with my mitutoyo cd-6 asx digital calipers and i got dead nuts 2.00mm on each of the 6 sides. accuracy of size alone is likely not the way to test for best hex.
@twilliamrafferty5228 ай бұрын
What brand & year car is that? I’m trying to identify the connector on my toyota matrix 2005.
@USAPLAYCOP8 ай бұрын
Very informative
@gregoryderosa80458 ай бұрын
Does the pb Swiss have a jacket or is it paint.. get into a lot of tight spaces
@johnspitzig64948 ай бұрын
Awesome video to the point direct easy thank you thank you
@Dj-ve2hx8 ай бұрын
What size is the ratcheting end ?
@nkoch818 ай бұрын
I have a 41” masterforce at home and a us general at work..masterforce is better quality
@user-ve4mn8ji3v9 ай бұрын
My glove box is connected on the bottom.......2012. Doesn't just pull off .....help need to replace blower motor
@dylanhinkel48689 ай бұрын
Appreciate you fine sirs
@andystoolbox10 ай бұрын
Your candor is inspirational. Great haul they got your a$$ good.
@rubenmorales752910 ай бұрын
Thanks for Your. Video Good job. 👏👍👍👍👍👍
@carlvaneck278311 ай бұрын
Thanks . That was a fight.
@allenblevins743011 ай бұрын
The O ring in that little can will only work once in this.
@qualityreno9689 Жыл бұрын
Thank you for taking the time to post this video. The engineer who designed the car was a genius, I see
@paulmanhart4481 Жыл бұрын
The pump handle on my Reilang is stiff. When I finally get it squeezed down, the oil shoots out in a 6’ stream. Do you know if this can be adjusted? Thanks, Paul
@johnmac3931 Жыл бұрын
cant see anything with your arms in the way
@jimmywells33 Жыл бұрын
They're all way higher now. If people hold off and don't agree to the raised prices they will return to a more sane level again.
@flamecranium7787 Жыл бұрын
Had the craftsman in 2014. Tried giving it a shot. Dropped it 2 ft and it broke at the handle. Garbage
@HardKnocksForge Жыл бұрын
Most things aren’t made to be dropped. They’ve gotten better with actually drop testing production tools today before they release them. It took them a while to finger out that they weren’t always getting the same build quality, and even materials the companies would specify, back from china to sell in store. It took them some time to learn and we all paid the price for it. I wouldn’t recommend most tools to anyone because I don’t know how people use them. I have called straight junk ass tools junk before, but even junk tools will work for certain people. It’s why most of my videos have gone into just showing people what I buy and maybe giving the thought process of why I chose those tools. I live old tools but sometimes the new shit is leaps and bounds better than the old tools.
@Ttw1976 Жыл бұрын
Why was there no stress test to see which ones stood up
@HardKnocksForge Жыл бұрын
I wasn’t really into testing the warranties these companies provide…
@Ttw1976 Жыл бұрын
🤣🤣👍
@Ttw1976 Жыл бұрын
@@HardKnocksForge which ones would you say are more durable
@HardKnocksForge Жыл бұрын
@@Ttw1976 I do like the PB Swiss ones…
@Ttw1976 Жыл бұрын
K ty
@teresaallen3045 Жыл бұрын
I hate grays green blue red Menards need keep there color in there tool chests
@OldSchoolNoe Жыл бұрын
Will buy!
@renatoperez8392 Жыл бұрын
Love this content
@snipermitchell6373 Жыл бұрын
I got one of these RPT101 sets how do you know which years vehicles it’s good for?
@mrbreezeet1 Жыл бұрын
Can we still get these anymore. If so, where at?
@HardKnocksForge Жыл бұрын
I doubt you can find them anywhere, anymore. You might try HJE or Clark’s tool‘s in Kansas City. You might also get lucky at Granger. I would check eBay because that would probably be about your best option if you can’t find them any of those other places.