Stay away from Husqvarna is my advise . I got a 570 BTS leaf blower and it didn't even get through halve a ltr of oil and petrol mix . which was Husqvarna oil and it started running really rough and not taking the throttle . I'm told by the dealer he is struggling to get it going and it might need a carborator. NOTIMPRRESSED Not a good buy is my opinion as they are now made in China. I have a cheaper blower which I've had for several years and it never gives me any issues year in year out . 1 year for the Husqvarna what was 7 times the price and it doesn't work ? Can anyone advise if they have had this issue with theirs please as I'm told they never give bother which I don't believe.

I have this blower and it is awesome

I just bought a near new 1, However bar oil is a bit weak. Ive drilled out the bar oiling holes as the pump is high volume not pressure it fixes the problem FYI.

Thanks man i just recently bought a used Husky 350bt for 120 before lawn season and was lokinbg a manual video

Can you put both cover on

hi, would you be able to show how to change wiring assembly on your 440?

good stuff

I've just bought a 435 and love it . The anti vibration is excellent, when I think back to when I started with a danarm 110 and how my hands would tingle for days with no anti vibration it's a whole different world now 😊

Great vid. Is this a chainsaw that you could use in a multi day usage just below commercial grade?

Just picked one up off FB marketplace for $100. I inspected all the parts according to the video. I think I got a steal. Thanks!

Hi, one of the 2 bolts in wich the sword has to fit has broken so I need to replace it. I will better replace both but I don't know how to unmount the plate in wich they are fitted from behind. Should you help me with that please?

I have one, it's a head ache with the choak....it does not turn off without shutting machine off. This is brand new and Husqvarna refuses to acknowledge this as an issue

Θέλω τα δόντια που μπορώ να τα παραγγείλω. Ευχαριστώ πολύ.

HOW DO YOU CHANGE THE OIL

🥰🥰🥰🥰

A chainsaw is not a toy sir !!! Shame on you , you’re a bad man !!! Jk merry Xmas .

Hi I have husq 580BTS I’ve noticed the red and black wire from the handle to the engine area is split and everytime I pull in the throttle it dies. Do you sell the wire cable that I can swop it out for. Please

I always use the compression release on my 445. It prolongs the life of the pull rope. Mine starts easily when cold but not so easily when hot. It's a good homeowner grade saw but it does have some issues. The single bar bolt is prone to loosening, the air filter is a little small, and the chain oiler pumps even when the saw is idling and is not adjustable. That makes it prone to clogging.

How do adjust the oil flow?

I'm having a hard time finding a video on KZbin on how to replace the kill switch on a RedMax ebz5150 Backpack Blower

Where can I get a new hd filter?

Excellent project knowledge video!

I have dolmar ps 7300 , from 2008 the best ceinsaws !!!😊❤

I've had several chainsaws but mine ran for an hour and quit, never would start again. I expect the coils are poor quality. At least test it out for a few hours before the store return policy expires.

I am so confused as to why mine wont start. Ive mixed the gas correctly, made sure the kill switch was off, primed it, choked it, and tried starting fluid but i cant for the life of me get it to run.

Nice video. Sparkplug?

Nice presentation and great product knowledge.

Hi👋🏻 can you say what does L and T letters mean on right side which one is gas and air Thanks 🙏🏻

Can you change the spark plug on this one WITHOUT taking the filter casing and all off? I know the 570bts ypu have to removed the air filter casing in order to change the plug, this one looks like maybe you wouldn't have to???

CFM recommendation. I have a half-acre yard. TONS OF PINE TREE(Norway spruce) a a few maple trees. I currently have a corded Toro which I think is 350 cfm and barely Moves Squat well maybe so so ) I’m looking to upgrade but not break the bank( I want under $400, but I’ll Go up Some of for the right one. Looking gas . I need powerful enough to blow entire yard wet leaves, pine needles and my BIGGEST CONCERN is powerful enough for Norway spruce pine cones. They are quite heavy pine cone.. what cfm minimum do you recommend. I saw one that was 765cfm for $349. I like the price but…is that enough. I want job to be easy. I saw another 890cfm, but it’s $479

Love the BTS580 comfortable, powerful, and durable as sh^t I probably have the 1st gen bc mines almost 7 years old and its absolutely beastly. Just change the fuel and air filters and these will last. I'm a handyman and I do a ton of lawns but I've used it in many many applications from cleaning debris off a roof to cleaning my filter on my shop vac. Amazing machine.

great informative video...thanks

Hello guys does anyone know where parts for the DOLMAR PS6400 are still being sold....I do know the manufacture of this particular chainsaw has been discontinued. So if anyone knows where I can get parts, namely the Ignition Coil please do let me know. Thanks.

Jim, I have several T540xp saws. Question is there a carb that will work on the 540xp that is not auto tune. I can’t keep the saw running at idle, it continuously dies in between cuts. Thank you for your expertise

Not impressed and Husqvarna Tec support, NOT GOOD. Owned 5 saw over 40 years, so I do know something about saws. The manual shows you to grease, oil the clutch needle bearing by turning it on its side and dripping oil around the shaft with the clutch installed? Got ahold of Tec support asking them about this, even the Tec guy was not sure, and sent me the videos on how to adjust the chain and grease the bar sprocket! Nothing about the needle bearing, Tried putting a pin in the center shaft to see in this is a grease port, but seems to be solid. Also the saw is very touchy on the chain adjustment, no oiler adjustment, cheap carbutator, not a good saw in my mind, no wonder you can pick them up all day long on eBay re built.

Great content thanks

I know this is old but I thought I would try . I am getting a makita ea3500 which I think is the same saw but first I need to know it the oiler is clutch/chain driven of crank driven which I do not want . Info hard to find on this saw . Strange looking oiler set up . Thanks

Just bought one used for $175.00 looks like new the guy got it from took great care of it very happy with it love my Husqvarna 55 an Husqvarna 150bt blower

μπορώ να προμυθευτο το πακέτο air filters. Greece 🇬🇷

Well what a waste of fking time asking a question as all of the questions are yet to be answered.

Hi Jim my brother bought me a 435 a few years back it was my first brand new chainsaw so I babied the hell out of it cleaned it after every use regular maintenance and one day oh about 6 months after I got it I was running it just fine I shut it down and havent been able to get it running since. I pulled the cord until I broke it put in a new one and broke that one to. I got a carb rebuild kit changed everything out made sure the jets were clean checked hoses they were fine bought new spark plug air filter put it all back together and pulled the damn cord on that thing until i wore it down and broke it again. So I put it on the shelf and left without hurtling the damn thing at a tree. So finally I said screw it and ordered a brand new carburetor hoses the works and put it all in and still nothing, when i pulled the plug it was dry as a bone, i cant even get it to start with starting fluid and it doesn't seem like fuel is getting to the chamber, when I push the primer bulb it fills with gas but then its like theres a clog on the line because after 3 pumps the bulb gets really hard to pump and gas starts squirting out from behind the bulb if i try and push it. So i tore it all again and manually inspected the lines blew air threw them and the carb and they were fine, put it back together and the same thing no gas to the chamber. Im at my witts end here and if i pull that damn cord one more time im going to lose it and take a sledgehammer to it.

Recommend running husqvarna bar and chain oil. This saw does not do well with cheap bar oil. I use vp racing fuels 50:1 gas. This saw is a beast. Cut up several trees over 7 years of owning it.

As an owner I highly recommend that you get the torque bit and check all bolts you can reach. You might be surprised how many are loose. Aside from that this has been a very dependable and well performing machine.

Great video. Thanks for sharing New subscriber here

Excellent and informative video, thank you

Acorns, I live in an oak forest with lots of acorns can it suck them up without damaging the impeller?

Nice video. What do you think the parts situation will be for the Makita/Dolmar saws in the next 5-10 years since Makita is pulling the plug on gas saws at the end of March 2022?

Will the older style crank assembly fit the newer 440

Try figuring out how to stop so much bar oil coming out....good luck. Pours the stuff nnooooo ADJUSTMENT.

I have a 435 but If it has any sort of decompression device on it, then it doesn't appear to work as this thing is extremely hard to pull considering it's size. I had a much larger Husky saw prior to this one and it was much easier to pull even though it was about twice the size.