Did it work at all?? Usually it’ll help a little. But def do the baking soda, hydrogen peroxide, and wrap with plastic and put it in the sun for at least 2 hrs for better results (I think I put it in the sun for 4-6 hrs). Let me know how it turns out! I would love to know!

@@HJartistry took me two trys and it work

@@luckykhouphongsy59oooo It worked without any peroxide?!?

@HJartistry yes. But also my shoes weren't that dirty. But I still want to try with peroxide. Just to see.

@luckykhouphongsy59 that is awesome! Thank you for sharing!! Yeah try peroxide in the future and let me know how it goes if you get the chance. Appreciate the feedback!

Oooo that is great advice!!’ Thank you! I’m gonna try to pin this! In your opinion is Angelus the best?

@@HJartistry honestly, i have never used another brand

@@its-the-shoesokay cool. I have done a comparison on Angelus, jacquard, and alphaflex (and found that Angelus is best). But always open to others experiences. Thanks for the feedback!!

So it lasted about 15 wears or so. But it does depend on where you wear them at: so I tried to wear them doing dumb stuff like in the rain and on wet grass. If you wear them in decent weather it lasts longer- just don’t wear them in snow/rain/wet grass since it doesn’t last as long.

@@HJartistry Thank you very much for your response. Wishing you a wonderful day!

Thanks!! If you’d like, I can send you a KZbin link to my full length tutorial on applying the sole protectors? Let me know! 👍

@@HJartistry yes, please

@NIZZEL117 DIY sole protectors for your sneakers kzbin.info/www/bejne/qJLTknmheMuKf6M hopefully this link will help.

So for this I feel like reshoev8r did better but I actually am working on a new video comparing laundry detergent and Castille soap…the laundry detergent won 🤣 So I would say try out some laundry detergent first and then (if it doesn’t work as nicely) go with reshoev8r. Biggest thing is to have good brushes to use. Def use a soft brush for the canvas and the stiff for the sole. Hope that helps! Let me know if you have any other questions! 😊

Unfortunately I didn’t really measure it. But it would be about 2 tablespoons of baking soda and 1 tablespoon hydrogen peroxide. The key is to make sure that the mixture is not too thick or too thin. If it’s too thick it won’t apply nicely to the shoes, if it’s too thin it’ll run off/get all over the upper/leather part. Also since it does depend on the size of your shoes, it is a bit of trial and error..:but you’ll want more baking soda than hydrogen peroxide in the mixture. Best of luck!

Yes, that’s correct. Let me know if you have any questions 👍

Unfortunately you’ll need to spend something to clean them. Hydrogen peroxide and baking soda are pretty common to have. If not, you can use detergent or soap but they won’t get your soles white. The sun is the only free whitening method I can think of tho. Best of luck!

Hey, I got everything on Amazon. I’ll link them: Affiliate Links: Sole Protector Film: 6x84 inch- About 3 pairs - amzn.to/3DrYDDz 12x72 inch- 5-7+ pairs- amzn.to/3DxbynO Grip Tape: Will last for 7+ pairs- amzn.to/454tGAP Heat Gun: Use on lowest setting- amzn.to/3Dtv2cK All Supplies: www.amazon.com/shop/footwearfashionista Hope that helps! Let me know if you have any other questions!

Appreciate it 🙏

Oooo thank you! I did not know that. Assuming I wouldn’t need to leave it on the Shoes as long? Or how many hours would you recommend?

You will be hard pressed to find anything above 3%.

@ginismoja2459 agreed! I think I’ll stick with the 3% and just do it twice 😆 all I see is huge gallons on Amazon with high prices and I’m not doing that .

Aww thanks! I actually just had a baby so I’ve been a little busy 😆

That’s awesome!!! So glad to hear it!!! It’s def worth it in my opinion to get the sole bright too. Feel free to make a video and post it! Love to see them! And thanks a ton for your feedback and experience 🙏

If it’s over $200 I won’t buy 🤣

I am not sure, I believe the way it works is with UV light. But I guess it can’t hurt to experiment!! Good idea 🤔

I ChatGPT it 😂 here is what it said: Whitening your shoes with a baking soda and hydrogen peroxide mixture works best when exposed to direct sunlight. The UV rays from the sun help activate the whitening process. Here's why: - **UV Light Activation**: The hydrogen peroxide breaks down into water and oxygen when exposed to UV light, helping lift stains and whiten fabric. - **Heat**: Sunlight naturally heats up the mixture, allowing it to work more effectively. Using only a hair dryer will provide heat but won't offer the UV light that boosts the whitening process. While the heat from the hair dryer can help dry the mixture and might give some whitening effect, it won’t be as effective as leaving your shoes in the sun. If you can’t access sunlight, you could try using a UV light device, which can mimic the sun's effect. Otherwise, for the best results, letting your shoes dry in the sun is ideal.

@@mariemouradjallian1651 do you mean to clean suede? Or if the upper is suede, but the soles have yellowed?

Def don’t use use water on suede. Only use a suede eraser and suede brush. Water can damage the suede so be super careful

Yes, agreed! My updated video has that now. Wish the original video I watched mentioned it before 😭

It doesn’t work as well but if you have a hair dryer and do it in the hottest setting and the lowest speed. Hopefully that’ll help! It does take a bit longer tho.

@@HJartistry does a lron work if it has stem

@@kingdomgames512 I wouldn’t recommend using an iron with steam to apply sole protectors. Sole protectors typically require a strong adhesive bond to ensure they stick properly to the sole of your shoes, and applying steam could introduce moisture, weakening the adhesive and causing the protector to peel off more easily. Instead, it's better to use (a heat gun) or hair dryer to warm the adhesive on the sole protector before applying it. This method helps to activate the adhesive without introducing moisture, ensuring a better bond. Hope that helps! Good luck!

Thanks! Did you shake up the 4coat prior to using it? Do you mean it turned white on the shoes? Or just in the bottle?

@@HJartistry I shook it! But I was left with what looked like white debris on the surface after I applied it.

@@BSHOWHotToysChannel hmmm so I do try to strain all my paints (I haven’t run into this problem) but I am assuming some of the top coat dried inside the bottle and left you with those clumps of debris. I honestly am not sure what to do. As removing the topcoat from the shoes would pull up the design that you painted. If you just did a simple design like a basic color way, I would probably use just a little bit of alcohol on it to remove the topcoat debris. Try a 70 or 90% alcohol to remove the topcoat, then repaint if needed, and then strain the topcoat before applying it to remove any debris. But probably the best advice would be to contact Angelus on what they would recommend. Sorry to hear about the issues 😢

@@HJartistry That was very helpful. Thanks for the answer. I will try to ask the manufacturer and other artists.

@@BSHOWHotToysChannel yes please do! So sorry to hear of the issue! Let me know the best advice! I always appreciate learning too! Hope you have a nice weekend!

Oh no! Which number of salon care did you use? Did you put it outside in the sun too?

40 strength I left it out in the sun the whole day 100 degrees weather didn’t work I did it twice. No results

Dang! That’s crazy cause I thought based on all the comments it would have worked! Thanks for sharing your experience!! Sorry tho! Try the baking soda and peroxide method but leave in the sun. Works pretty well. I’d probably recommend at least 2 sessions in the sun tho.

I was trying to find the exact combo I used. But it’s very similar to Midnight green from Angelus. I know I added a bit of Angelus mist to it also and I think it was a tad bit of turquoise. But majority was midnite green from Angelus (and only a few drops of mist and turquoise). It was a few years back so don’t quote me on it. The midnight green Angelus is really similar so you won’t be disappointed if you just use that one (and any touch ups will be easier too).

@@WheelerRiches true! Can’t argue there. And only lasts for a few dozen wears 😢

@@LosDoyerss ooo that works to unyellow the soles too?

@@HJartistry yup, white shoes only.

How does the nail polish work ?

@@juwonsamuel8859so here is what I found out: Nail polish remover contains acetone (or if you use it, check the ingredients list to make sure you get a nail polish remover with acetone-if you have to buy one I would just get regular acetone at your local Walmart or hardware store), which can act as a solvent and remove stains or discoloration on the soles of your shoes. However, there are some important considerations: 1. **Effectiveness**: Nail polish remover can help whiten rubber soles, especially if they have dirt or yellowing. It works best on white rubber or synthetic materials. 2. **Potential Damage**: Acetone is strong and can potentially damage certain materials, especially if your soles are made of anything other than rubber. It might cause discoloration or degradation of the material over time. 3. **Application Tips**: - Use a cotton ball or cloth with a small amount of nail polish remover and gently rub the affected area. - Test a small, inconspicuous spot first to make sure it doesn’t damage the material. For a safer alternative, you could try using a magic eraser or a mixture of baking soda and peroxide like I did in this video here: kzbin.info/www/bejne/jZK2gKx4j7KBqM0

@@Arqade206 personally I wouldn’t recommend it since there could be some issues (I mean it could work, or it could fail). I would probably say try to get a paint brush or a sponge at Michael’s when they have a 40% off coupon or when there is some type of deal. I’m gonna link this video too: kzbin.info/www/bejne/g6nQY2SKipaMjJI It might be helpful as well.

No problem! Glad it was helpful! Check out the update in the description or let me know if you’d like me to link it 😊

Awww really appreciate it! I should try some new tests! Any suggestions?!

Sure thing! Affiliate Links: Sole Protector Film: 6x84 inch- About 3 pairs - amzn.to/3DrYDDz 12x72 inch- 5-7+ pairs- amzn.to/3DxbynO Grip Tape: Will last for 7+ pairs- amzn.to/454tGAP Heat Gun: Use on lowest setting- amzn.to/3Dtv2cK All Supplies: www.amazon.com/shop/footwearfashionista

@@cactucoterses9074 sorry I don’t understand what that means 🥲

@@plushyoshi5192 sorry not sure I understand. You need to measure your own shoes for all measurements.

I am hesitant to adjust the viscosity of Alphaflex because adding a thinner could significantly compromise the integrity of its composition- any alterations might degrade Alphaflex. Additionally, there are numerous methods to thin it, but I am unsure if any would be ideal. However, I am open to suggestions on potential additives for thinning. Let me know what you suggest!

@@HJartistry I only ask because I think I saw something where they recommend their thinner for leather since the paint is thicker to start with. I'm curious how it would work then because I am considering buying some to try on high end shoes where the Angelus is just too glossy, and the duller makes it look milky. Seems Alphaflex is way more expensive, and the price to buy a small sample (with shipping) makes the cost per ounce even more expensive. I think a lot of people won't be forking out just to try it.. shame they don't offer smaller sample sizes to get new customers.

@llimo4382 I realize now this is my video for paints (I was thinking it was for the topcoats 🤣). I believe alpha has a paint additive to help it adhere where Angelus has it built into their paints. What color are you trying to do? Angelus has flat white and black. Usually with their duller I use a super tiny amount or use a different topcoat so it isn’t so shiny. Personally I would use Angelus and then LK topcoat in Matte (or flat is another option). LK topcoats are very expensive but they really do hold up best. Pricing is def steep but see if they have any discounts for the 4th of July so it isn’t so terrible. I’d recommend reaching out to the companies with any questions. All brands seem pretty good and their knowledge and insights. Hope that helps!

@@HJartistry Thanks. That is very helpful. I'm working on two pairs of Chanel ballet flats, one powder blue and the other tan. I'm mostly concerned with the finish matching. I'll check for 4th of July specials.

Hey! I think it was right around 4hours. If I did it again I would recommend doing it for 4 hours in the sun, and then removing it under water, and then doing it one more time in the sun for about 4 hours. But you might find just 1x is enough. If you try it def let me know! I want to hear how it turns out! Just try not to get any peroxide/baking soda on the upper.

Hi ​@@HJartistry! Thanks for the quick reply. I think we might be talking about different things, as I was actually asking how long did it take for the shoes to turn yellowish again 😅 sorry if it was confusing. Thanks for the tips though! I'm currently making an ice box and would like to try the hydrogen peroxide and baking soda combo as well.

@gabby.alcantara ooooo haha! Gotcha. Well right now I am actually customizing them again so I haven’t been outside with them. Most people say it’ll be a few weeks. If it’s in the house tho it’s been like 3 months and they still look fine. But here is the long answer: The time it takes for the soles of an old pair of white Air Force Ones to turn yellow after cleaning can vary based on several factors: 1. **Exposure to Light and Air**: If the shoes are exposed to direct sunlight or air, the oxidation process, which causes yellowing, can happen more quickly. This can occur within a few days to a couple of weeks. 2. **Cleaning Products Used**: Some cleaning agents might accelerate yellowing, especially if they leave residues that react with light or air. Improperly rinsed cleaning products can lead to yellowing within a few days. 3. **Storage Conditions**: Shoes stored in a damp or humid environment are more likely to yellow faster. In contrast, shoes kept in a cool, dark, and dry place may take longer to show signs of yellowing. 4. **Age and Material of the Shoes**: Older shoes or those with specific materials may naturally yellow faster due to the breakdown of materials over time. Typically, you might notice yellowing anywhere from a few days to several weeks after cleaning, depending on these factors. Proper cleaning, thorough rinsing, and careful storage can help delay the yellowing process. But I would prob plan on it being a few weeks.

And good luck on the ice box! I try to cut costs in the summer time with the sun if it’s safe to put outside-but def ice box is the way to go (and then you don’t have to worry about people swiping them off your porch/deck) 🤣 😵‍💫🥲

​@@HJartistryHahahaha that's true! It's actually the rainy season in our area that's why I can't rely on the sun. Thanks for the info regarding the yellowing! I'll try to update how long my AF1 would last before they start yellowing again when I'm able to deoxidize the sole. Good luck on customizing the shoe and have a good day HJ!

Oooo I didn’t know that! Thanks for the info 🙏 Although I did learn that my big mistake was that I didn’t put it in the sun 😭 I did an updated video here: kzbin.info/www/bejne/jZK2gKx4j7KBqM0si=xzWCjiuwu2P0kHqc feel free to check it out and give me some critiques! Always open to advice and suggestions!

Thanks so much with the feedback! Totally agree. Sometimes to have it stick better I use rubbing alcohol on the soles and then let it dry and then apply it (still might not work as well tho).

Thanks so much! Do you do any customs? Love to see it if you do!

@@HJartistry Just starting out.

@@MackieJackCreations awesome! Stay at it and keep practicing! You’ll be a pro in no time!

@@HJartistry Thank you!

Ohhh noooo! See if you can remove the gum with the ice cube method. Sometimes that’ll help. Aww so sorry!

@HJartistry I used goo gone bro. Took it off in a matter of seconds!

@@SneakerShetgood deal! That’s perfect! Sorry it messed up the sole protectors tho 😢

@HJartistry it's all good bro I ordered some actual protectors from Amazon got 6 pairs coming in.

@@SneakerShetgood! What brand/kind did you get? Def let me know how they compare if you get the chance!

Yep the beginning part didn’t work but I left out a crucial step! If you want to see where I learned that I need to put the baking soda and peroxide in the SUN!! Check out this video-kzbin.info/www/bejne/jZK2gKx4j7KBqM0si=kC5D-QrTOgytlcgp

Reach out to @saviourkicks on IG this is from him

Personally, I would not recommend it since doing the upper. Let’s just say it’s leather, can actually eat away at the material causing damage, so I would only put salon care 40 on the midsole and sole. I will add that the one step that I forgot to do because I was not told was to put it in the sun, so here’s an updated video using hydrogen peroxide and baking soda and then putting it in the sun. kzbin.info/www/bejne/jZK2gKx4j7KBqM0si=-g9lZBprBxsbqH-g I personally would use acetone on the leather upper if you are working on Air Force ones or air max 90s etc. and then after you remove the factory finish, I would paint it white with Angelus flat white . Let me know what Shoes you were thinking of doing the whitening too, and I can give you better advice .

@@HJartistry thanks for all the info!!! I just did the salon 40 and it worked ! Heels are white again … I wrapped and let the sun do the job !!! Once the Air Forces are a little older I’ll try restoring the upper leather with your tips ! Thx .. earned yourself a new sub.. ps: you should do a video on restoring the upper part of the shoe for the future

Glad to hear it worked out well! Appreciate it!!! I am actually working on a video now. I just cleaned up a pair of dirty white AJ1 lows…I’ll work on decreasing it (and doing some painting since you recommended it!) Any other ideas or details of what you all would like to see are welcomed!

Yesss! I am glad I finally realized I needed to use the sun! Always love the fact we can use things around the house rather than expensive cleaners…I am about to do a sneaker cleaning video with household items to see how it compares!!

@@HJartistrywhat if you don’t have plastic wrap

@@laurarosas7753 see if you can use a plastic bag or anything plastic. Main thing is the longer you can keep it on the shoes ( baking soda and peroxide) without it flaking off, the better. A plastic grocery bag would work or you can see if it still is okay without it, might just not work quite as well, but it will help it whiten a bit better than nothing at all. Let me know how it works out! I would love to hear!

😅😅😅😅😅😅😅😅😅😅😅😅😊😊😅p😅00😅😅 pp😅😅😅0😅😅p

@@HJartistry lol sun isnt good enough you need to make a icebox lil bro come on now😂

No, not after a week or so…that’s more if you un-crease them. But I would recommend using hydrogen peroxide, baking soda, and the SUN (I didn’t know to do that in this video 😭 ). This video does explain it since I redid it : kzbin.info/www/bejne/jZK2gKx4j7KBqM0si=5GCpdemfRKXI3rLE If you want to check it out. I still have them and they haven’t turned yellow yet. But yes over time it’ll go back to yellow…usually more like a few months instead of a few weeks tho. At least that has been my experience. Let me know if you try it and your results!

Yea mines turned back to yellow

@@602Stateaww man! How quickly did it turn back to yellow after cleaning?

@@HJartistry like 2 weeks

Haha you didn’t see my newest video: kzbin.info/www/bejne/jZK2gKx4j7KBqM0si=NVVuJLshglsaV36B The other video never said to put it in the sun with baking soda and peroxide. Just watch the video and you can see I finally did it right. I def recommend using baking soda and peroxide and the SUN! Wish the other video I watched gave accurate info and didn’t leave out that vital step. If I was misleading people I wouldn’t do that video 😂 and no I am not sponsored- I wish 😂 thanks tho!

Maybe but to be fair I saw the peroxide trick but never anything about the sun either. Whereas with solebright I guess they say on box to put in sun. Obv buying raw ingredients dont have shoe instructions

@@Hshjshshjsj72727 thanks! Yeah always tough finding good advice that has all the info needed 😢

Thanks! Appreciate it! Any suggestions for the next video I do? I was thinking maybe a sneaker cleaning comparison or how to remove creases from the toe box? Any suggestions?

Great info! Always appreciate the feedback!

Thanks for the feedback. What is the expensive way? Always open to suggestions