Loved this!

How long did it take to do this job if had to guess

you guys forgot a hose. the black vacuum hose with the yellow plug in it

Core memories caught on video, love to see the smiles.

Helmets

Consider showing the seat /hole size and open with liner installed.

Where are you camping at in this video? It looks beautiful

Having the young ones along adds a lot and is part of why we wander. You will never ever regret making these videos.

Wow! We are really ready for an Ozark National Forest ride! Especially after a decent rain shower.

Over Memorial Day we’re in and around Jasper. Very dry, smaller steams were either low or not flowing at all. One Jeep on 40s was even able to cross the Buffalo River near The Narrows.

Glad to see you back on the channel!!!

welcome back!

Cute little guy. Sounds like he likes to splash in the water. It's a lot of fun taking the young ones out.

I just found your channel because you helped out Ozark Overland Adventures with the belt. It is always good to help out anyone on the side of the road even if it means going out of your way to do it. I have a cheaper way to air down and it seems about as fast as yours but I am only running 33's. So if it takes a little longer, like you said it is not a race. We are out to have fun. However, you mentioned airing up with the same set up. When I have a little more time I will see if you have a video of that. My airing up is a lot slower. One tire at a time. But again, it is not a race. I subscribed and look forward to seeing more of your content.

Ans my wife is from yell county

Im looking for groups to try to start riding with, im usually up in thr ozarm national forest up above haggarvile

Great adventure. Side note.. very cool of you to help Ozark Overland with his jeep belt. Good job.

I am here because you rescued a friend in Ozarks! Well that and I love overlanding content.

yes sir great content.

Its been a long time since y'all posted anything new. I miss your videos. Good on ya' helping O.O.A. out.

The talon is awesome. That pioneer would have cleared that hole with 4 wheel or 4 wheel locker. I have one and I know this.

Great, thanks for sharing. If I didn't know better, I would have thought you were in our "neighborhood" 😎

Thanks for the video. I haven't had a chance to explorer that area yet but planning on it soon and hoping for some good footage

Great Video. I have heard that the throttle is a little jumpy with the Pioneer. Have you heard the fix for that is "Throttle Max" ? What do you think?

So I replaced it because it was leaking all my water and very little oil now that I replaced it I can’t keep the oil in it as soon as I turn on the vehicle all the oil leaks out I followed the torque specifications I mean sure and went in there I am wondering if it’s a defective part I thought the aluminum one could you help me out with some suggestions?

So this is so crazy to me. I look for an oil cooling replacement video just as a refresh from the first time I had to do this about 6 months ago. First, mine is also black sheep.. lol looks very much like that one. Almost identical metal tubular fenders. Mine just have slots cut out on top. The first time I changed out the oil cooler was an exact story. Not sure where you boys are from. I’m here in the Carolina’s. Took my freshly bought sheep to a place called uwharrie. Had my stepson with me. He was a Jeep owner long before I bought this one. Looked like it’s never seen mud. That is until I took her to uwharrie. Spend the day on the trails and having a great time. On the way out, omg, the mud hole has a name. I have since forgotten it because the damn thing almost destroyed my Jeep. I was never gonna take it in mud. But I was coaxed into it. I’m not gonna lie, it was fun. But never again! I bought a pressure washer. High pressure washer..I washed it i can’t remember how many times. I laid under the jeep and pressure washed it. I’m still finding mud. NEVER AGAIN! I would say about a month later i had to change out the oil cooler as it started leaking oil. My mistake was trying to go cheap. NEVER AGAIN! I bought a black plastic one. Cost me about 75 bucks. Had to buy the gaskets separate. My first time ever changing out something of this magnitude. Found one really great video where it wasn’t a time lapse. He went slow and showed everything. The kind of bolts what to take off, what I didn’t have to take off, what I could just move to the side. However, no matter where I looked I couldn’t find the torque specs of any of the bolts. So my stupid self thought, ok just tighten em. So I borrowed a Milwaukee battery operated 3/8 ratchet and let er rip. Boy did it. Stripped 2 of the oil cooler bolts. I’ve never been so upset at myself in my life. But there are once in a lifetime lucky moments for me. I took the bolt to Lowe’s and found bolts identical to the originals but just a hair bigger in diameter. When I installed the bolts, I used a manual vintage torque wrench and prayed as I waited to hear the click. When it clicked I almost shed tears. Same thing with the second bolt. Another mistake I made was not putting any thread lock on the bolts. I’m sure you can guess what happened about 4 to 6 months later being on 37’s and knobby tires. I’m guessing the vibration loosened those bolts. Or stripped them back out again. I just assumed it was a big plastic pos oil cooler. So I too bought an all aluminum oil cooler. Even the cap is aluminum. I wasn’t taking any chances. I haven’t put it in yet because I have had a back injury that has prevented me from doing so. Rods and screws in my spine and now SI joint. But I am tired of seeing my baby just sitting there going to waste. I bought this cooler about 6 months ago. Yes, I’m sitting here with it in my lap. Lol I have got everything ready to get to work on it tomorrow. Going to say a huge prayer that the two bolts I stripped out the first time isn’t the issue. But if it is, I’ve come up with a hack to fix it. Hopefully there won’t be any issue and my back will let me get through it. Great video! Love the Jeep! Great job!

Question - how does driving through a hole and not around it affect the Oil Cooler? The reason I ask is I did the same thing in beach dunes but I thought maybe I over tightened the filter cap bc I did an oil change recently.

very delicious burger 🤤

mr david 😂❤

I think i am more inclined to a jeep beach craw! Love Fl. AZ has some great backroads too. Chkout Sedona too.

Maybe you could sell jeep some snippets of this crawl for your retirement stash!

Now you got a JEEP CRAWL! COLORADO is a whole different ball game! Im sure after you rode all day you were tired. Its Intense. We used to top the jeep crawl off with a bowl of chili and some music. Kick up our boot under the stars! Great memories bro. Please be safe.

I wonder if my 2023 Honda pioneer 700 will perform like that? You all have Pioneer 1000s in this video I do believe.

I have a Honda Pioneer 700, it's been an impressive machine so far. (Andrew Caruson Butt hurt over an Confederate flag below) hahah!!!

Did it come with the oil sending unit

Nice people and fun fun fun ❤

Walking those logs across the creeks will make you feel young again!!!

Great video and great job spotting

Blackberry winter. Glad y’all stayed warm. Good video.

Great video!! Glad to see you out enjoying the great outdoors!!

Good video. I'm doing my rig on a budget, too. I get good ideas from watching your channel. Tganks

Your grandson's a doll Tuck! And the videos are done well!

Smart

Nice where is that I am in FL

How bout FJ! I know for sure its a Go!

Enjoy the tunes! Videos are Nice Bro! I would love to do this trip in the Spring! Hah today is first day of Soring 23. Love Arkansas in Spring!!

AWESOME ATTITUDE!

I love your vids. I like your honesty about not needing to buy the most expensive gear, etc. There's definitely a snob factor out there if your gear isn't a certain brand or certain size or a certain amount of this or that. That's all fine but I got into the overlanding hobby because of the independence it offers. Not all of us can afford to put a $20K suspension underneath or a $40K engine under the hood. I've been wheeling since long before it was "a thing" and the best rigs have always been the ones that people figured out for themselves, and built for themselves - on a budget. PS, please post what the list of materials was for your air-down kit. I'm going to build ome just like it!!

Man loved the video! I was just told that y’all live very close to us!

Nice job!