Di Giovanni Racing

Пікірлер

@Fusion_Tranquility_Meditation Ай бұрын

F1 Speed karting sucks the cheese from a dead rats backside. You pay $35 dollars for less then 6 minutes of drive time. And the race monitor has a radio control that gives him control of how fast the karts can go. Complete waste of money. And if your new to kart racing and a bit slower then the pack, you only get maybe six laps, instead of ten like the rest got. So in essence they punish you for not being as fast as the rest. Way, way, way over priced & over rated.

@digiovanniracing Ай бұрын

Thanks for sharing, ciao!

@Fusion_Tranquility_Meditation Ай бұрын

@@digiovanniracing for real kart racing experience, you can go to Infineon Raceway in Sonoma, California. It's a kart track next to a professional race track. The karts are powered by 16 hp, or a 22hp Rotax gas engine. They go 45mph, and 55mph. They have soft compound racing tires and pull about 3Gs through corners. Now that's kart racing.

@Prius_M3 Ай бұрын

Nice work and keep pushing!

@digiovanniracing Ай бұрын

@@Prius_M3 thank you, bro

@davidcho739 Ай бұрын

Will white lithium grease work

@digiovanniracing Ай бұрын

@@davidcho739 no, white lithium grease is like water, and will not survive the heat and pressure of being in the bell-housing.

@davidcho739 Ай бұрын

@@digiovanniracing I already used white lithium grease. Will that damage my car

@digiovanniracing Ай бұрын

@@davidcho739 probably not, but it’s not going to last very long

@Pinkielover 4 ай бұрын

p0171 code could be a bunch of different problems you just got lucky.. my car was a solenoid purge valve for the evap was stuck open... kept throwing a P0 171 code..

@nmartin5551 5 ай бұрын

Anyone know if this applies to a 2010 Toyota Sienna?

@mageedmubarez 5 ай бұрын

Great video👌

@bigpete14 5 ай бұрын

nice driving! what was your best time?

@digiovanniracing 5 ай бұрын

If I recall I think that night was a 21.6xx, but overall best at that location for me is a 21.485

@HiramVelez-p6i 5 ай бұрын

He said..it doesn't much as much? They need to check when they put it in reverse

@jorgehuaman8770 5 ай бұрын

Great job kids..ya make a great team..just one lil advice..for all that work done...shoukd have sprayed at least some brake cleaner inside those intake valves...but no stress..Great Vid

@misconstrued7671 5 ай бұрын

this is cool

@digiovanniracing 5 ай бұрын

I’m glad you think so, thanks!

@gradea1636 6 ай бұрын

Not girlfriend in the background with the corrections 😭

@ghostryder18 7 ай бұрын

yo man, love the video and the glasses! cheers

@milkbones504 7 ай бұрын

I recently got mine done that's why I'm commenting. I bought all 4 mounts took it to my mechanic. Turns out they only changed 1, charged me for 4, kept my new parts they didn't use. I had another mechanic confirm this. I contacted the BBB and filed a suit against the shop. Just be careful and confirm the work. Make sure you tell them to show work as they are doing it

@digiovanniracing 7 ай бұрын

The rear is always a pain but I'm disheartened to hear an established mechanic shop couldn't replace more than one for you when they charged for 4. Good on you for taking legal action.

@0804witt Ай бұрын

I learned the hard way as well but always ask for old parts back in the original box whenever dropping off vehicle for work. If they ask why explain it’s nothing personal with their shop just bad experience in the past.

@sn1p3r. 8 ай бұрын

looked like JakePeralta in the thumbnail lol

@digiovanniracing 8 ай бұрын

Hahaha, no just me sadly

@bigpete14 8 ай бұрын

nice driving! what's your PB?

@digiovanniracing 8 ай бұрын

Currently a 21.412!

@digiovanniracing 8 ай бұрын

Also thank you! :)

@eyyo2561 8 ай бұрын

How many km on your Corolla…hi from Prince George, BC

@digiovanniracing 8 ай бұрын

Ciao from Halton Hills, ON! Currently sitting at just over 185,000 and working to fix a power steering line leak

@hunterhryciuk3964 8 ай бұрын

Air box hose not necessarily to remove

@mathxsilentgameplay 9 ай бұрын

Got the FT-speed headers too catted and wondering how it could sound with that catback so thanks a lot for the video :D Is there a lot of drone in the car with that setup ?

@digiovanniracing 9 ай бұрын

This cat-back does exhibit a considerable amount of drone around 3000 rpm

@mathxsilentgameplay 9 ай бұрын

@@digiovanniracing did you already changed it back or still using it ?

@digiovanniracing 9 ай бұрын

@@mathxsilentgameplay still on the car the exact same way after all these years

@bsquaredmotorsports 9 ай бұрын

YESS TALK TO ME BROTHER

@bsquaredmotorsports 9 ай бұрын

That 'fuck' whisper when the oil filter wouldn't come off when you stacked the gloves on 😂😂😂

@digiovanniracing 9 ай бұрын

🤣🤣🤣❤️ the struggle of lack of preparation

@GameFlife 10 ай бұрын

spend my friday night watching you guys work and freeze to dead, veggie burger sound nc

@NicheGreens 10 ай бұрын

107. Keep at it

@digiovanniracing 10 ай бұрын

Thank you!

@fichonn 10 ай бұрын

Is this Corolla 2005?

@digiovanniracing 10 ай бұрын

Yes it is

@fichonn 10 ай бұрын

@@digiovanniracing nice.. Did you have any symptoms before the gasket went? Was idle rpm fluctuating or too high rpm on a cold start?

@digiovanniracing 10 ай бұрын

@@fichonn yes these were the exact symptoma

@fichonn 10 ай бұрын

@@digiovanniracing OK thanks

@plscuh 10 ай бұрын

Congrats!❤

@digiovanniracing 10 ай бұрын

Thank you!

@DeltaBravoOpr8r 10 ай бұрын

Camera Angle… Needs to come up

@digiovanniracing 10 ай бұрын

If you watched past the first race it looks pretty good to me! Maybe you can come be my camera man next time ❤

@EricGallant24 11 ай бұрын

Lol tf was bro doing with the brake check at 5:34

@digiovanniracing 11 ай бұрын

He was with us, he over-reacted to the blue flag because it was his first time in a kart.

@Kadenplayz1 11 ай бұрын

Yo I’m ur 100th subscriber

@digiovanniracing 11 ай бұрын

Oh on God? 👀♥️

@lindseyolsen7130 11 ай бұрын

Bro he has 99 subs 1 more till 100

@digiovanniracing 11 ай бұрын

100 subscriber special ideas? 👀

@liangfengrui1990 Жыл бұрын

I tried it at first, then I realized it was the fork and the bearing underneath the rubber boot. I had to spray grease inside there to get rid of the squeaky noise.

@Palmtop_User Жыл бұрын

Yeah same thing happened to my valve on mine as well yesterday

@digiovanniracing Жыл бұрын

A tear shed for the loss of another bleeder screw 😢

@Yosue787 Жыл бұрын

Mine is just really dim but i am trying to seek for an awnser to fix it my self or just replace it

@digiovanniracing Жыл бұрын

Before attempting this, have you tried using the interior light dimmer wheel to make it brighter?

@Yosue787 Жыл бұрын

@@digiovanniracing yes i have but the situation is that when i start the car the clock is dimmer from one side to to the other (the left side is easy to read the minute mark its harder) I am gonna attempt this if it doesn’t work then ill just buy a new one it shouldn’t be too expensive but hopefully it works

@drdelirious8899 Жыл бұрын

holy shit blow your nose

@aaroncordeiro1599 Жыл бұрын

Good stuff 👍

@digiovanniracing Жыл бұрын

Thank you, brother 💪🏁 we gotta get you out here

@joanethtigse6302 Жыл бұрын

Side by side on the chicane is Ludacris

@louis84100 Жыл бұрын

great video. i believe the gasket is the throttle body gasket. I just purchased one and it looks identical 👍

@digiovanniracing Жыл бұрын

I wanted to replace that as well, but Hot Spot parts were insistent on telling me that doesn’t exist lol

@Pinoy_runner_and_hooper Жыл бұрын

Hey there. Nice content. But which boot did you peel back? and which side as well? thanks!

@digiovanniracing Жыл бұрын

So this boot is on the top of the bell-housing you should be able to see it with a flashlight, it’s right behind the slave cylinder for the clutch actuation on too of the transmission

@Pinoy_runner_and_hooper Жыл бұрын

@@digiovanniracing gotcha! thanks brother. will def look into this later. more power to you and to your contents! much love from Philippines!

@XxTheIOSGAMERxX Жыл бұрын

so this is only for pre 2017?

@North305 Жыл бұрын

7:08 nice

@digiovanniracing Жыл бұрын

Thank you!

@IJustAccidentallyThe Жыл бұрын

Nice one mate

@digiovanniracing Жыл бұрын

Thank you! Glad you enjoyed the video

@IJustAccidentallyThe Жыл бұрын

@@digiovanniracingI'm looking at all oiling solutions after I spun a rod for the second time on track in my 86. Considering a similar accusump setup, and this is the clearest video I've seen on it 👍

@1Solace Жыл бұрын

Hi, can I have an update please? How well did it work on track?

@digiovanniracing Жыл бұрын

It works as intended I’ve had this on m summer daily/ racecar for the last 2 years with no issues. I have since upgraded to an electronic valve instead of the manual ball-valve so it sits in the engine bay instead of the passenger compartment.

@1Solace Жыл бұрын

@@digiovanniracing Thanks, I was wondering if it would be a viable option for my fa24 brz

@digiovanniracing Жыл бұрын

@@1Solace more likely than not yes. You probably have the same crank galley port as an FA20 block would to utilize for this purpose

@1Solace Жыл бұрын

@@digiovanniracingThanks for the info. I really appreciate it. Someone was saying that you would only use it in a track dedicated car running at 2k rpm with a tune idle as the pressure in the accumulator is more than the fa24 at idle. I'm no expert but I don't know how true that is

@lesterli3043 Жыл бұрын

Link to the electronic valve please? Also do you offer installation for FA24 and where are you located 😂 Thanks dude

@amenserm949 Жыл бұрын

Didn't you had to use a jack to support the engine?

@digiovanniracing Жыл бұрын

At somepoint yes

@arashsanei6406 Жыл бұрын

Tried it and my clutch is still squeaking 😢

@Adnan_Abdullah Жыл бұрын

Where is the light of the clock located? The clock is working, but the light is not working.??

@digiovanniracing Жыл бұрын

My understanding is the clock memory is on a separate circuit from the display lighting

@Adnan_Abdullah Жыл бұрын

Where is the light of the clock located? The clock is working, but the light is not working.??

@gamingwitchutuu429 Жыл бұрын

I have same code and issue and my smog due 26th. I pray this fix it, if it’s the fuel pump I’m done lol

@digiovanniracing Жыл бұрын

I haven’t done the fuel pump on my Corolla personally, but if it’s anything like how my FR-S is, you can just access it by removing the rear seat cushions!

@Ben-Hawy Жыл бұрын

She laughed when you said remove your dipstick 😂

@Rk-ku5jn Жыл бұрын

What's the clicking sound when you press on the clutch at 1:00

@digiovanniracing Жыл бұрын

Probably the clutch switch or the spring mechanism bottoming out. Cheap cars make funny noises

@nabilking4611 Жыл бұрын

It’s happened to me too u need to fire up before bleeding

@Warkid1993 Жыл бұрын

Thanks this fixed my squeaky pedal. I had my throw out bearing replaced recently and they left the rubber boot peeled back and exposed to the elements which required cleaning and relubrication

@tannerhamilton6096 Жыл бұрын

Ahaha I’m in the black gti good driving man!

@digiovanniracing Жыл бұрын

Amen brother, same to you!

Ең жақсы KZbin

Пікірлер