MrMaddparkison

Пікірлер

@martymartindale2648 24 күн бұрын

You're doing great man

@chicop8514 2 ай бұрын

I’m not sure but I think you want pin 87-going to your head lights. Unless u using same li e 85 to jump star a relay. 85-supposed to be regular 12volts acc. 87 supposed to le higher current flow. But if it works it works.

@FernandoRamos-k8p 3 ай бұрын

What type of cable did you use to bypass???

@johnjordan9538 5 ай бұрын

Which fuse is running light

@eternalliving2148 10 ай бұрын

hello! i know this video is old and i’m very late but how has this held up for you over the years? has it given you any electrical issues at all?

@kidslostboxed 10 ай бұрын

is it necessary to ground both sides for the high beams and the low beams to run at the same time or can i just do 1 side

@motorguyjp 19 сағат бұрын

I did one side on my 02 Tahoe and it worked fine for both lights

@scotthartman7185 11 ай бұрын

You didnt say if you put the relay back in on the fog lights or drl’s?

@hardyb311 Жыл бұрын

I have a 5 pin connector i can't figure it out just burnt my finger when the paper clip got hot on my last try so i quit 😢

@gpt5002 Жыл бұрын

Good job so you had to add the ground in order to have both headlights? Like the low beam ground?

@Lsanthony1500 Жыл бұрын

Wouldn’t it burn out the headlights faster if I do this?

@Original.soletee98 Жыл бұрын

Will definitely try this out on my 01 Tahoe

@talltimbot Жыл бұрын

Cut your fog lights for oncoming cars

@wkelvin79 Жыл бұрын

What do you have your fog lights wired to. My truck did not come with fog lights but i'm adding them. Are tgey tued in with your headlights

@jjmax3400 Жыл бұрын

Cool mod! Will be trying.

@beardedstoryteller1654 Жыл бұрын

Oh my goodness thank you so much! My fogs wouldn't stay on unless my high beams were on. I tried the jumper, and it works high/low beam. 01 suburban.

@B-Smalls Жыл бұрын

Being able to wire daytimes in w turnsignal would be sweet

@marchomeautorepairs 2 жыл бұрын

Keep up the good work

@RueBaby5150 2 жыл бұрын

You splice the body ground into the oem negative run? Or you cut it and run the negative from the bulb jacket to the body ?

@chazdoyer9640 2 жыл бұрын

Splice a wire into the low beam headlight bulb negetive wire and attach it to a ground point on the body

@frederickbrown7002 2 жыл бұрын

Bro your the best..

@marcello4263 2 жыл бұрын

great video. you should be using diodes so that power can only flow in only one direction.

@Boogergames 2 жыл бұрын

Great Video thank you

@rivermaxwell4618 2 жыл бұрын

It’s really good you helped me a lot Ty

@bigctarr 2 жыл бұрын

Doesn't work. Did this and they will come on for about 30 seconds then shut the headlights off.

@alexbattle7288 2 жыл бұрын

This video is very helpful 👌

@highlive2166 2 жыл бұрын

I have a 09 Sierra has new heads new oil pump so great oil pressure....but is still ticking someone help 😓

@MrMaddparkison 2 жыл бұрын

When it worms up does the ticking stip

@MrMaddparkison 2 жыл бұрын

Also when you had the heads off if you had them off did you check the valves make sure they're seating correctly.

@Crozier4582 2 жыл бұрын

What pump did you use? I also have afm 5.3 just hit 260000 and my o ring is shot. Wanna replace punp but confused on which ones for afm

@MrMaddparkison 2 жыл бұрын

Melling 295hv I'd needs to be a high volume pump. 80psi is what the afm calls for.

@Dudevegaslv 2 жыл бұрын

I put leds on low beams and it worked only a day and they are not working . I put the original bulbs and still doesn’t work . I can’t figure out the problem

@slayershine6220 Ай бұрын

Yea did just what he did and it blew 1 of my new led light out and popped out my 15 amp fuse wont try that shit again 😂

@littlecabininthebigwoods5720 2 жыл бұрын

I replaced my switch, screen, oil pump, o ring, and cleaned my oil lift tube. Still around 40 and have a lot of tick. Any brilliant ideas?

@frmdablockboi3436 2 жыл бұрын

If you’re entire oiling system has been replaced and you still have tick then something in your valvetrain is most likely stuck and/or loose (stuck lifter, loose rocker arm… etc)

@jeremyhuntington1 Жыл бұрын

Exhaust leak. Either from valve cover gasket or manifold.

@garylcarrier 2 жыл бұрын

Good job!

@danielcoleman3111 2 жыл бұрын

The relays work by grounding. See videos by South Main Auto Repair.

@alvinmaholmes5255 2 жыл бұрын

My drls didn’t come on and I wired it to my 10 amp fuse and they came on. I also wired to my fog lights & they worked. I tried turning them off but they stayed on. Should I add a toggle switch to power it on & off?

@MrMaddparkison 2 жыл бұрын

I would if they aren't turning off with the system. Also I've found the little sensor on the dash for the drls has been an issue to. I've cut mine out all together. But I've got a few friends that have just fixed it an ran the modded set-up.

@alvinmaholmes5255 2 жыл бұрын

@@MrMaddparkison I’ve thought about it for the longest bc mine have an electrical issue with the lights. The headlamp relay is good but the fuses weren’t getting fire that’s what made me try it

@justbeingme9730 2 жыл бұрын

My guy a hero

@MrMaddparkison 2 жыл бұрын

Thanks I've done a few vids on weird stuff I find but KZbin keeps pulling stuff for one reason or another

@ronaldcrenfro4637 2 жыл бұрын

i JUST DID MY 2000 Tahoe LT 85-87 with a 20amp fuse between

@Dave-bn3ku 3 жыл бұрын

Great job on the video. I have a 1995 Chevrolet S-10 LS that I bought new. It now has 344,000 miles on it. It also has the OBD II plug. Pin 4 and 6 did not work on mine but Pin 5 and 6 did the trick. Mine is the 2.2l, that may be the dfference between 4.3l i don't know. Just wanted to put that out there so it may help someone else. Great video on sharing good information on these bastard years.

@codys9601 2 жыл бұрын

I have a 95 s10 as well.. thank yoy will try that aswell

@JoseCastillo-on5zq 3 жыл бұрын

I have the same problem with a 2004 4.8 replaced o ring oil pump oil pressure sensor did fined filter under sensor or maybe I did not look good enough I'm at 20 on pressure goes down to zero when oil gets hot no nock on motor only low oil pressure flashing

@MrMaddparkison 3 жыл бұрын

Ya use a pick an pull the filter from under the pressure switch. I understand it protects the switch from junk getting in there. But if you do regular oil change you should be ok. At least that's what I'm hoping lol

@MrMaddparkison 3 жыл бұрын

Update video tomorrow. Problem solved days ago lol.

@edwardthacher1622 3 жыл бұрын

These newer Chevys are a headache.

@MrMaddparkison 3 жыл бұрын

I agree.

@Tbolt1000TForLife 3 жыл бұрын

My 95 Blazer also has an intermittent starting issue were every 2 to 3 weeks it will fire up then die then it just cranks but will not start. Whenever that happens I have to spray brake cleaner down the throttle opening then it starts and runs just fine on its own for 2 to 3 weeks then it happens all over again. I took it in and the mechanic told me it's an electrical problem having to do with the signal from the pcm to the fuel injector. The service engine soon light will occasionally come on when I drive it sometimes it will flash and sometimes it won't then it will go out after a couple of minuets. It also shifts too early at wide open throttle where it shifts at 3,000 to 3,500 rpms when it should be shifting between 5,000 and 6,000 rpms. It also idles high after sitting overnight, depending on the temperature outside it idles between 1,500 and 2,000 rpms and when its warmed up you have to shut off the engine, let it sit for a couple of minuets and then start it up again and the idle will go back to normal. Someone please help me I'm stumped!!!

@MrMaddparkison 3 жыл бұрын

Wow. I'd replace the throttle. My auto would shift at 3 3.5 normal driving then straight floor was around 4500. In the winter 1.5 sounds right for the idle but after it warms up it shou be 500 to 700. I would grab a salvage yard throttle an swap it out an see if that fixes you problems.

@MrMaddparkison 3 жыл бұрын

I had a 94 do that an the throttle swap kinda fixed it. Summer time ran dam good winter was a tad sketchy but it was good to run

@Tbolt1000TForLife 3 жыл бұрын

@@MrMaddparkison What does the throttle have to do with it?

@Tbolt1000TForLife 3 жыл бұрын

@@MrMaddparkison Also your talking about the whole upper plenum.

@Tbolt1000TForLife 3 жыл бұрын

My '95 Blazer(manufactured in April '95) has the pcm under the hood, has the same obd2 plug, it has a pin in 2,4,5,9,13,16. No pin in 6. So what do I do for mine?

@MrMaddparkison 3 жыл бұрын

Have you tried a OBD2 scanner.

@Tbolt1000TForLife 3 жыл бұрын

@@MrMaddparkison Yes and it didn't work. It's ibd 1.5 just like yours you know. It's just that the pins are different then yours. It says obd 1 on the under hood lable.

@garyebendorf4479 3 жыл бұрын

Very informative and thorough. Thank you.

@michaelbrooks9852 3 жыл бұрын

Are your lowbeam lights running all day?

@Marky_Rhino Жыл бұрын

Yeah they do

@ravenmoonchild7036 3 жыл бұрын

I have a 2002 Chevy Burban and when I grounded my passenger side low to the frame, I lost the low for the passenger side but the truck worked for my driver side Hi/Low stay on together. Which is so weird, What do I need to do to fix this issue ? Bottom line, Passenger low doesn't work but high works, driver side both hi and low work.

@MrMaddparkison 3 жыл бұрын

I would check fuses an see if it has a separate fuse for driver an pass side. But it should have worked asking an you got the ground. Did the bulb blow

@Specialedes 3 жыл бұрын

You have to leave the factory ground intact strip the rubber off the ground and add a wire to it and ground that wire

@ap1s2kguy 3 жыл бұрын

Has anyone got a clue to run DRLs with fogs ? I had it once before but forgot what wire i jump to where

@Irontrucker 3 жыл бұрын

Thank you . I did pin 85 from the headlight to pin 87 on the fogs . Works ☺️. 2001 Tahoe

@brokeboyent 2 жыл бұрын

That’s to have the fogs running with the headlights right? I don’t really care about the turn signals

@Irontrucker 2 жыл бұрын

@@brokeboyent yes

@brokeboyent 2 жыл бұрын

@@Irontrucker Ok thank you! I didn’t really expect to get an answer since it’s been over a year lol but I definitely want to do this with my truck

@CinematicTouchProductions 3 жыл бұрын

Thank you for video, what Guage wire did you use 16,18, and do you think it will work on 07 chevytrailblazer?

@MrMaddparkison 3 жыл бұрын

Not to sure of the wire size it was just a piece I had laying around an a 07 im not sure. But I would use a multi meter first

@royduron6969 3 жыл бұрын

Very helpful! I'm tired of not knowing what the heck is going on with these lights not coming on even after replacing all bulbs and housing.

@michaelbrooks9852 3 жыл бұрын

Did you try to connect your lights in this manner? If so are your low beam on all the time?

@peppercombs 3 жыл бұрын

09 Silverado 5.3 here. I’ve replaced the O ring, sensor switch twice (thought one may be faulty) and changed the oil filter. Still showing low pressure. Should I just replace the oil pump now?

@MrMaddparkison 3 жыл бұрын

Ya it the pump

@joshbeck289 3 жыл бұрын

Ether the pump or the cam bearings