Thanks!

@ how much would that unit cost?

@Gacha.Cupcake assembled, tested with 6 month warranty 2.4 Tesla (24,000 Gauss) Board with out the Coil is $950. Pre-Made finished Coil $450 If you want to DIY it will be less. If you want it completely built in the Case with 3 years warranty price is $$2700 + $50 Shipping in USA.

@Gacha.Cupcake if you just need a Board or Coil or other parts or modules just let me know

@ how much for the kit? Thanks How much for the board?

@@Adi-y9n I'm looking into laser engraver, really need one

@@Adi-y9n thank you

@felixaudet5860 you can make PEMF with Audio Amplifier, PWM and Coil but you won't get much out from it. To get strong pulse, you need to store additional energy into the capacitor bank, preferably with high voltage and suddenly release it into the Coil. This will produce high intensity pulse. Audio Amps don't do that.

@@AndreyD I agree 100% with what you said, on an electrical engineering standpoint, but from a medical standpoint, what proves that high intensity pulses are actually better for any given health condition? There are many machines with low power magnetic fields, but few have the medical testing to back their claims.

@felixaudet5860 you have bunch of time to waste, use weak pulsers, if you want to see the results from a single session - go with the strong pulser. I don't use anything below 6,000 Gauss, on average I use 10,000 Gauss to 20,000 Gauss. It doesn't seems to have any negative side effects to use strong Pulsers but results are visible right the way, why mess with weak and waste lots of time to get some results? There are many things you can do with strong one that you can't do with weak one

@Gacha.Cupcake thank you I wish I can help you, I have to buy everything down to the nut then invest time designing, testing, then building, then deal with warranty, plus bunch of other overhead expenses. Things are not easy Good luck

@Gacha.Cupcake if you are handyman you can save $$ by DIY, I'm disclosing everything on my channel here and website bbmpulser.org

@RetroBerner This is PEMF (Pulsed Electromagnetic Field) device, other words Automatic Magnetic Pulser. This device generates strong Magnetic pulses with intensity range from 12,000 Gauss to 24,000 Gauss BBMPulser, stands for Bob Beck Magnetic Pulser, this devices are used per dr. Bob Becks Protocol to deactivate pathogens in lymphatic system (sewer system of the body) also can be used for number of other things, pains injuries and much more. Please research on benefits of PEMF online

just found your other videos, I think that will be all I need to learn for now, thank you!

@dragonmaster391 yes, I have many videos, you can find them on my channel here

@herminator0126 I thought about it. Most of users here in US don't need Voltage Selector Switch. Would you like to see how to wire transformers with out switch for 110VAC only?

@canaldoevangelistaflavio65 this is the latest 2024 circuit with power output of 24,000 Gauss. Here is the web page where you can find more info, I will be updating it soon bbmpulser.org/bbmpulser-5b-2024/

@herminator0126 why not? What kind of applicator your current PEMF have?

@IcybernateCaptCliff PEMF Pulsed Electro Magnetic Field is used for number of things. It will be better if you research yourself on benefits from PEMF. This devices can come with different configuration applicators, the one I'm using here is equivalent to the flashlight with focused beam. This applicator can deliver strong field deeper to recharge cells, to aid with healing injuries, pains and much more

I would like to do it to use it as a transcranial magnetic stimulator and also make a coil in 8, could you guide me to do it?

@74766801 I tried figure 8 Coil with my pulsers. It's won't work. The reason is that my Pulsers produce too long of a pulse 2-3 mS long, this results in coil destroying itself with in 10-20 (10min sessions). I would suggest using angled figure 8 coil with pulsers which work with high voltage 5kV -15kV and small capacitor bank (in nanofarad range) that set up will produce pulses which are high in inductance but short in time, we are talking about nanoseconds long. Thouse pulses will not have energy to twist figure 8 coil and won't destroy it. I like long pulses (0.5-1mS long), they deliver more energy into the tissue and very effective. It's harder to produce them because of the property of Coil. Let me explain. Coil in the beginning will accept energy dumped into it for a very short time with out putting much resistance to it. The more windings, the longer it will take for the Coil to saturate, typically it's in microseconds range. Ones it saturates it will start resonating, if you have large capacitor bank and trying to discharge it all into the Coil, you will make Coil resist, this will result in Coil heating up and stressing Capacitors. Coils do not like DC voltage, that's what you store in the capacitors. Hope I didn't get you lost by now, let me know and I will explain further if you are interested

I'd like to build everything, I need to know what materials I need to start looking for them.

@74766801 here you can find the circuit, parts list and info on PCB If you wait some time, soon I will offer DIY kit which include everything you need to build working 2.4 Tesla pulser. Later I will be adding option to purchase DIY kit with the case Here on my channel you can find info how to build different parts of the pulser, more videos are coming bbmpulser.org/bbmpulser-5b-2024/

@camels9654 thank you

@CapnBob2010 yes, thank you for suggesting this case!

@@AndreyD Sorry it took so long, but (as you well know) there are hundreds and hundreds of cases you've got to sift through to find the ones that are the right dimensions -- a real P.I.T.A. ;-) I finally made a CAD file where I can just plug in the dims and see if they will likely work. A big problem I have found is conflicting dimensions depending on where you look (inside vs outside ?)

@CapnBob2010 finding right fit is not an easy job, takes weeks of research! Thank you for your help

@@esecallum I would like to see it

@esecallum do you have your KZbin channel? I would like to see it. I had similar ideas. It won't be PEMF or mag Pulser anymore, it will be moving Magnetic Field MMF of something alone thouse lines.

@@AndreyD i do but hardly use it. i build 4 actually. the first is a motor which has a flat ring magnet from a old dvd player about 2 1/2 inches across housed in a plastic lid . the ring magnet has north south north south alternating poles on the same side...the second one has hard drive magnets glued to dvd disc and spun with a motor. 3rd one is a old hard disc drive and ferrite magnets glued to the silver platters. the rpm of all three can be varied. i am sure you with your talents on the magnetic pulsar make these with no problems. its just a motor with magnets glued to a flat disc.. the loudspeaker one is very simple with a flat planer magnet glued to the center bit and a square wave going thru the speaker.

@esecallum why don't you film your work and post it on the KZbin? You are on something new which can start new branch in Magnetic Pulsers I suggested you call it MMF for Moving Magnetic Field. Start working on it by improving your designs. I see a potential in it. It just needs to be safe to use. We are talking about spinning things, if scaled they can potentially cause injuries if not designed with safety in mind

Glad to hear it!

@felixaudet5860 yes soon I will be selling DIY kit which includes everything you will need to build it yourself. In my videos here I'm showing in details how I put together different parts of the pulser My next video will demonstrate how to assemble PCB and video after how to place assembled PCB into the Case

@@AndreyD Thank you. Any idea of the price it'll be sold for? Will there be multiple models?

@felixaudet5860 price for the parts which I pay to aquire them + 30% mark up

@felixaudet5860 bbmpulser is open source, second option is to buy all the parts by yourself, circuit and parts list available for free

@@AndreyD Thank you, do you have a link for a schematic + part list? 30% mark-up, that's really a gift to humanity, considering all the work you've invested into this. I'd be more interested in purchasing a ready-made device though.

@@Lardzor bbmpulser.org/wp-content/uploads/2019/12/document.pdf This 3" applicator is designed to have focused magnetic flux for deep penetration. From Dr. BOB BECKS protocol this type of applicator allows to get to the lymph nodes system to deal with pathogens hiding there. Read document linked above

@Lardzor in addition PEMF is used to recharge cells, to speed up injury recovery, to deal with infections, pains and much more

@felixaudet5860 I do, contact me [email protected] Thanks

I just made a video where I show how to build complete Coil, its a long video, soon will be uploading it

On your PWM, you have red LED, is it blinking when circuit energized?

@@AndreyD Yes, LED is blinking.

​@merneadanfoundation6775 I see you are using different PWM. With your ZKPP2K PWM you should set 4Hz and 50% duty. I'm assuming you are using build in 18V Zener to drop voltage from 30VDC to 12VDC for PWM and for relay, right? I don't know how well this set up will work, the 18V 5Watts zener has just enough power to run PWM module which I suggested. Your PWM maybe consuming more power, may result in zener overheating. Here you can find more info and circuit for this open source silver pulser bbmpulser.org/silver-pulser/

@@AndreyD Yes im the 18V zener. Please tell me whch PWM Module do you use? Thanks for your assistance.

Andrey thanks, ive build a 555 PWM and its working now. Thanks

@@merneadanfoundation6775 2+ years with a daily use

@MP-ls3hm yes you can replace power supply with 3x 9v batteries

Also, wouldn’t you use a 27v Zenner because using a Zenner of lower desired voltage would cap the voltage and act as a voltage regulator??

@MP-ls3hm 18V zener is used to lower Voltage to the 555 PWM module from 30V to 12V. Also to the relay, they both run at 12V. 30V is fed to the relay contacts, so on the output you are receiving full 30V

@@merneadanfoundation6775 kzbin.info/www/bejne/b3-xqXWGfZKLfcksi=IYvDkpxqGXIl-TV4

@merneadanfoundation6775 just look under my videos on my channel, I made a few videos on Silver Pulser

@@merneadanfoundation6775 relay changes polarity basically makes AC from DC around 4Hz

@@AndreyD Thanks

@@merneadanfoundation6775 yes I did

@@AndreyD THANKS

@XenXenOfficial PEMF is used for many things 1. To recharge cells, improves their functionality, low charge cells becoming target for different pathogenic fungi. 2. To shrink tumors 3. To supress pains 4. To deactivate viruses 5. To kill bacteria infections 6. To heal bones Strong PEMF is like your personal doctor . I use it daily for different things. Beautify is that it has almost no negative side effects, yes there are some cases where it's not recommended to use but for the most of the time it can be used anywhere on the body anytime for as much as needed

@domgualtieri8691 it was removed in this new update. Reason is that I don't want 3ms pulse in this set up, in new circuit pulse is much shorter its around 10us

@@AndreyD thanks for the clarification. What benefit is there to making the pulse shorter?

@domgualtieri8691 signal will have higher amplitude which will introduce more microcurrents into the tissue, coil won't be heating up as fast. Another thing I use strip coil with this set up, this type of coil will discharge capacitor bank much faster then coil made of 14AWG wire (older version) In this set up the pulse to the thyristor lasts as long as there is a charge in cap bank. As soon as capacitor bank discharges, the circuit will shut off thyristor.)

@@AndreyD Interesting. I shortened my pulse to 1 ms and noticed a little difference. I'm going to try 10 us next. Thanks

@domgualtieri8691 try removing 33nf from the circuit To get 10uS pulse you need lower resistance coil and capacitor bank connected in parallel, not in series Oh and one more thing, capacitor bank needs to be lower in capacity

@felixaudet5860 DIY kit (PCB, all the components, Including prebuilt coil, no case) price $1k Assembled kit, with out the case $1,200 Comes with 6 month warranty. Assembled complete unit inside the case with 3 years warranty $2.5k

@@JamieBjornson please contact me [email protected]