What if thief connect directly to computer

Just a generic seat cover with ST embroidered to make them look official, don’t even fit properly.

Nice one buddy 👍

Thanks!

Thanks for this video. Wish I saw before replacing my fuel pump, I was getting P0087 and P0089 and was advised pump then rail replacement. I replaced fuel pressure sensor and had no issues since 👍🏻

Might be worth spending some more time taking the trim off and hiding the old one better also if it was mine I’d take the petrol pump fuse out every night

It won’t be fully hard as cable ties are soft different plastic ,

Awesome video, I’ll be trying this this summer

What program do you use on the computer?

I got these for the recaros in my fiesta van they’ve been on a few years now and still look decent. On the drivers seat I fitted a sheepskin cover over the seat first then fitted the st custom cover over that. It just makes the st seat cover fit a bit tighter

My fiesta didn’t have keyless and was still taken, howd they do it?

Hi I’m having fuel issues with my 2014 st. I had a fuel injector problem before n I replaced that and it cured it. But 4 weeks later I’m having similar problems. I’ve changed fuel rail sensor. I’ve changed all plugs. Surely can’t be another injector? I’ve had them tested and there all 175 but port 3 is spiking just over that. So I’m sure that has to be it…

Hi I’m having fuel issues with my 2014 st. I had a fuel injector problem before n I replaced that and it cured it. But 4 weeks later I’m having similar problems. I’ve changed fuel rail sensor. I’ve changed all plugs. Surely can’t be another injector? I’ve had them tested and there all 175 but port 3 is spiking just over that. So I’m sure that has to be it… any suggestions? Cheers

Hi I’m having fuel issues with my 2014 st. I had a fuel injector problem before n I replaced that and it cured it. But 4 weeks later I’m having similar problems. I’ve changed fuel rail sensor. I’ve changed all plugs. Surely can’t be another injector? I’ve had them tested and there all 175 but port 3 is spiking just over that. So I’m sure that has to be it… any suggestions? Thanks mate

Hi I’m having fuel issues with my 2014 st. I had a fuel injector problem before n I replaced that and it cured it. But 4 weeks later I’m having similar problems. I’ve changed fuel rail sensor. I’ve changed all plugs. Surely can’t be another injector? I’ve had them tested and there all 175 but port 3 is spiking just over that. So I’m sure that has to be it… any suggestions? Thanks mate

Hi. what could be the problem with my fiesta 1,6 2013. It lacks power when accelerating from gear 1 an 2?

Thanks for video! I'm chasing the P00CF code and my low range sensor is currently sitting in the 3v's... is that an indication I have a faulty sensor? Stays the same (up and down fast of course) while reving the engine.. I smell fresh fuel almost every time I start the engine.. 2014 Fiesta ST 143000km thanks!

Cheers for this, just did mine following your video and had almost nothing left of the bushes 😂

My kit didn't come with the spacers. Are they necessary and if so where did you get them? TIA

Hi could you please help I can’t find anywhere to get this part

This is a 1 million dolar tip ..... thanks . I have used the same technic on my Ford camper car .... thanks for sharing :)

Literally the only place on the internet I could find where it actually showed where the hell the sensor actually is. Thank you

About time you made a comeback bro! Miss the videos

Thanks for the video brother!

Mine is showing on the DTC's also but when I run the live data, it stays around 0.08v and doesn't move, whatever revs you sit at.

Thank you! Same exact thing with my car did the test you showed and sure enough that’s what it was!

Any recommendations for a decent OBD extender?

Do you need to program the new pressure sensor?

im having the exact same issue with my 2016 fiesta st, 88k on it. i just ordered a high pressure fuel pump and it comes in tomorrow but after seeing this video im going to pick up this sensor tomorrow. exact same issues, thank you so much.

To make it even more difficult, insert a blank OBD port back into the original socket with 12v attached to the data pins on the socket, so when the criminal attempts to connect to the OBD port, it fries their unlocking gadget! 👍🏻‍

Hi im from Canada and my fiesta st when i put gaz right after the idle go up and down and the car shut off by it self any idea what that can be !?!

Had same problem here in Germany. Car was build in 2016 with 91000km. A Guy from the German FiestaSt Forum told me that, because he saw this video. Now i am happy :). Failure Code was P0089

Hi mate, having code P2636 showing up and heard this sensor can be the cause. Where did you get yours from? Can't seem to find any anywhere, thanks

Massive problem in North America too

Are these easy to do? I’m debating weather to do mine this weekend I think the garage put standard rear springs on my fiesta and it sits higher than normal I’ve been told there’s 2 types of springs ones with standard suspension and ones for sport suspension so I’ve took the gamble and ordered ones with sport springs 🤣

Massively helpful vid this - cheers!

Do you still have the ST?

Are both sensors the same?

Did you have problems filling your tank when you were having this issue

Nice post Jack but really not sure about your thoughts and feelings over the torque. Maybe you have something different . My son has the same as you say and the peron remap totally changed the car on every level.. it’s an awesome upgrade., if you want a smile from ear to ear. But be careful, it will bite you. I have zero bias to say this other than maybe jacks other car is a Lamborghini. The peron can be driven gently, don’t floor it in 1st 2nd , apply the gas progressively in 3rd and 4th 5th 6th you can nail it. Anything else and you will wriggle down the road like a snake .. highly recommend the Peron . But also the correct insurance, it’s costly but essential

Great, informative video. Thanks for sharing!..

thank you, my fist was diying and I replace the high pressure sensor 🤦🏻‍♀️ thinking it was the code P018C now I notice there was another fuel pressure sensor.. I checked out and the wiring its getting burn by the downpipe 😅 time to fix it greetings bro!!!

Glad it worked out for you. Found the colour match on mine was dreadful pretty much ruined my rear bumper

I hope this fix’s mine :( changed everything apart from that, when mine dies if I get someone to tap on the fuel pump regulator controller in the boot at the same time as turning it on it will start again after a few tries

You must’ve made a very busy road or a carriageway.

I’m having the same problem in my 2016 fiesta ST this has helped me a lot thank you so much for doing this video I just bought this car used with 58,000 miles and it’s idling so low it’s cutting itself off and just stalling in my driveway. Thanks again for this video I’m going to go purchase the part and hopefully this will fix my issue as well

Anyone know if this will work on Bmw 320d

Thank you!

Thank goodness I saw this before buying an st as my daily in the process of looking for low miles example 👌

I had one of them and sent it back due to the poor fitment over the strut towers. Summit one was only an extra 50, and required no hammering 😂