BIG WILL CAR CARE

Пікірлер

@warbed1 4 сағат бұрын

Nice way to replace a perfectly good bushing.

@walter.bellini 11 сағат бұрын

Good point about the condenser screws breaking, will be getting four new screws from the dealer as I need to replace my 2009 Highlander Radiator today. There is an important video on "The Car Care Nut" that explains the correct process to bleed out all the air from the cooling system when this type of work is done. Thank you

@cougarjimenez4549 Күн бұрын

Hey Friend, The A/C fuse of my 2011 Nissan Rogue , it get burn,I have changed it ,but it gets burned again,what could it be?

@BIGWILLSCARCARE 23 сағат бұрын

Sounds like you have a short . Check the connectors on the compressor make sure nothing isn't broken or the power wire touching the frame

@Myfyrbyrd1 Күн бұрын

What year is this Highlander?

@BIGWILLSCARCARE 23 сағат бұрын

2008

@dannyl2598 Күн бұрын

Thank you.

@BIGWILLSCARCARE 23 сағат бұрын

You're welcome! Thanks for watching please Like, Share and Subscribe if you haven't already

@douglasmanor4427 Күн бұрын

Thank God I only have to do it 4 times,Thanks for the video.

@BIGWILLSCARCARE 23 сағат бұрын

I'm glad it was helpful! Thanks for watching please Like, Share and Subscribe if you haven't already.

@smallkancil 3 күн бұрын

Good idea to have internal view of the tyre while shaking it at 3 9 and 12 6. Keep the videos coming.

@BIGWILLSCARCARE 2 күн бұрын

Thanks for watching, please Like, Share and Subscribe if you haven't already

@Live4nothingordie4something 3 күн бұрын

What do I do if one the pins is broken?

@BIGWILLSCARCARE 3 күн бұрын

If the pin is broken you can order the connectors and cut and splice the wires. You just have to make sure to line up the connector in its original position and splice them one at a time

@supercraig2009 5 күн бұрын

Hello, how difficult was it to remove the lower radiator hose? Sounds like a sly question but appears in a tight spot

@jam1gamingslt280 23 сағат бұрын

Its a little tedious but not that bad

@Toddtoddy78 7 күн бұрын

What are the toque specs for the manifold bolts??

@BIGWILLSCARCARE 23 сағат бұрын

Cant recall but you can find it online or in the dealers service manual. Thanks for watching please Like, Share and Subscribe if you haven't already

@jeremybaity7002 7 күн бұрын

Do you think it would cause any issues if I just disconnected the plug until I can order the part? Just got a 2013 and every time that thing makes that noise (when first driving) it scares the 💩 outta me 😂 Great video.. got this one saved for when I do the repair. 🙏

@BIGWILLSCARCARE 23 сағат бұрын

No problems. You would just be unable to open the door

@eafavela 8 күн бұрын

Part number please??

@BIGWILLSCARCARE 7 күн бұрын

Not sure of the part number but you can find it on Amazon or Ebay just search ignition coil replacement connector and order a few different types

@PattiHarrison-uu2yb 8 күн бұрын

Where is the vsc button on a Toyota Highlander 2006 limited

@BIGWILLSCARCARE 23 сағат бұрын

Never had to do it on that year Highlander. Not sure

@MoisesJimenez-rr1yh 10 күн бұрын

A que llamas drenar el refrigerante? Como lo hago? También puedes decirme que herramientas necesito para hacer todo el proceso de cambiado

@BIGWILLSCARCARE 23 сағат бұрын

Make sure the engine is cold, a regular too kit should do the job. I believe i mentioned the sizes in the video

@Live4nothingordie4something 13 күн бұрын

Extremely intelligent sir. Thanks!

@BIGWILLSCARCARE 23 сағат бұрын

Very welcome

@Toddtoddy78 13 күн бұрын

No one ever tells the torque specs. I can’t find the torque specs for the intake bolts and studs

@Chewy_GarageBandDad 13 күн бұрын

*DRAIN THE COOLANT BEFORE STARTING PROJECT OR RISK LOOKING STUPID LIKE ME.

@slavedaddy756 13 күн бұрын

Amazing video bro…….100percent knowledge and built a confidence straightway to fix one of my freinds 💪💪🙌🙌🙌😊

@texslife1578 16 күн бұрын

This is the front main seal correct??

@nordinehelassa2373 16 күн бұрын

great video! which fuse exactly do we need to replace to check if that's the issue?

@mguardiola6302 16 күн бұрын

It should say it on that guide or you can take a flash light and see which one looks blown

@nordinehelassa2373 16 күн бұрын

@@mguardiola6302 but how is it labeled on the guide? is it DR LOCK, MODULE 5, ... ?

@mguardiola6302 16 күн бұрын

@@nordinehelassa2373 I’m not sure it might be different for every car. I’m gonna try to fix mine tomorrow and I’ll try to reply to this comment when I see how mine is labeled. I have a 2017 Hyundai Elantra

@tonyapitts6580 16 күн бұрын

This noise started on my 2011 nissan sentra

@ericx7476 17 күн бұрын

The chrome on the engine covers is very thin & will bubble soon.

@BIGWILLSCARCARE 17 күн бұрын

So far so good no problems

@blueyes0528 18 күн бұрын

Thank you this is the best video I've ever seen, you're the best.👍👍👍

@BIGWILLSCARCARE 17 күн бұрын

I'm glad it was helpful! Thanks for watching please Like, Share and Subscribe if you haven't already

@aaronocs 18 күн бұрын

I just broke mine today while checking my spark plugs and ignition coil. I had to put a ziptie for now. I’ll try this method much cheaper. Thank you!!

@BIGWILLSCARCARE 18 күн бұрын

Glad it helped Thanks for watching please Like, Share and Subscribe if you haven't already

@danielgraham1634 19 күн бұрын

I got a 06 accord v6 is the the same for a v6 not sure what engine u working on

@BIGWILLSCARCARE 17 күн бұрын

It should be the same procedure, but I don't remember what engine I was working on for that video.

@huongvu9818 20 күн бұрын

Thanks so much for sharing your video each step very clearly.

@BIGWILLSCARCARE 17 күн бұрын

Glad it was helpful! Thanks for watching please Like, Share and Subscribe if you haven't already

@nyroot 21 күн бұрын

Thanks a million, BIG WILL CAR CARE. Advice on flex head extended ratcheting wrench saved me. For Beginners, a big word of caution, without the right tools it's not easy to get this job done. You will invent new curse words to remove those top rusty nuts.

@BIGWILLSCARCARE 17 күн бұрын

Yep, the right tools make all the difference. Thanks for watching please Like, Share and Subscribe if you haven't already

@chrisconlon 23 күн бұрын

Dude! Worked Perfectly!

@BIGWILLSCARCARE 23 күн бұрын

Thanks for watching please Like, Share and Subscribe if you haven't already

@michaeljutrowski3651 25 күн бұрын

Or you put a 19mm on there and wedge it in there and get in the car and turn it over quick

@BIGWILLSCARCARE 17 күн бұрын

You can do that but I'm not responsible for broken fingers lol. Thanks for watching please Like, Share and Subscribe if you haven't already

@JohnNwadike 26 күн бұрын

Great video, I have got the same issue with my Nissan 2014 qashqai, do you reckon this might work the same?

@BIGWILLSCARCARE 17 күн бұрын

It should. Thanks for watching please Like, share and Subscribe if you haven't already

@dee22212 29 күн бұрын

Are you located in NY? I would like you to work on my car. LMK

@BIGWILLSCARCARE 29 күн бұрын

[email protected]

@82_KID Ай бұрын

What year Subaru is this video on? Im presently trying to do this on a 2002

@BIGWILLSCARCARE 29 күн бұрын

That was a 2012 Subaru

@82_KID 29 күн бұрын

@BIGWILLSCARCARE Thank you so much

@aydendemko9675 Ай бұрын

Thanks gang

@BIGWILLSCARCARE 17 күн бұрын

Thanks for watching please Like, Share and Subscribe if you haven't already

@SSJDMS Ай бұрын

I removed this camshaft pulley but there is no seal behind that i have 2003 honda accord v6 Do I have to take timing belt off to reach it ?

@mikeymike9616 Ай бұрын

Great job! Is it possible to access the crankshaft position sensor from underneath the Frontier?

@BIGWILLSCARCARE 17 күн бұрын

You have to remove the wheel and inner fender shield. Thanks for watching please Like, Share and Subscribe if you haven't already

@yomomsbigpimp Ай бұрын

Thank man!!! 🙏 Great vid

@jamesrichardson771 Ай бұрын

Should you dis connect the sway bar links, " at least the top of them ???

@jamesrichardson771 Ай бұрын

Very Nice 💥 🛠

@rudyleplane727 Ай бұрын

You are an artist my friend! 😊

@parales03 Ай бұрын

Will this be the same for a 99 accord v6.?

@BIGWILLSCARCARE Ай бұрын

Yes it should be the same procedure

@cinderellie8 Ай бұрын

Very thurough. thank you

@BIGWILLSCARCARE Ай бұрын

Glad it was helpful! Thanks for watching please Like, Share and Subscribe if you haven't already

@sanelatutaris15 Ай бұрын

Great video!!! Thank you so much!!!

@BIGWILLSCARCARE Ай бұрын

Glad it was helpful! Thanks for watching please Like, Share and Subscribe if you haven't already

@BadCompany410 Ай бұрын

no way dude ! i’ve been pulling that temtioner all day and the belt is way to small. how the heck did that work? i was using the center bolt on the temtioner. maybe using that little nub will give me the little bit i need? thanks man. most of these videos the peope are scooping past the part we need and that’s actually getting the belt on.

@BIGWILLSCARCARE Ай бұрын

Glad it helped. Thanks for watching please Like, Share and Subscribe if you haven't already

@BadCompany410 Ай бұрын

@ dude it took me 3 days! i bret got it now. see i became disabled (100% handicapped).. 10 years bedridden and only up a little over year. what you showed helped more than you could imagine. here’s the kicker! “it was the wrong dang part this whole time!”.. they gave me the v6.. ahhhh…. i got it though. thanks again! 👌🏽

@thelthrythquezada8397 Ай бұрын

Just to be clear, when I leaded on the connector the whole body broke leaving behind the stems in place on the coil packs. I wasn't even mad, I was so tired (physically tired) I thought "aaaaannd this is a great stopping point for today!!!

@BIGWILLSCARCARE Ай бұрын

That happens sometimes, just take pictures from different angles so you know what pins goes where. Good luck. Thanks for watching please Like, Share and Subscribe if you haven't already

@thelthrythquezada8397 Ай бұрын

I was leaning on them (2006 so its OLD) and must have cracked it clean off. I have been working on my for since the end of Sept over the weekends and I am so over it, but I just need to wait for a power steering hose, and these new connectors, fill her up with coolant and fire her up. I am just worried that one of my ground wires are not in the right place and will cause a car wide short. I am so very mad that I did NOT take a before picture. I surely have learned my lesson!

@mountainbiker4450 Ай бұрын

If the ones from dealer already have wires, I assume you can use the same technique to remove the new wires first, and then go from there?

@BIGWILLSCARCARE Ай бұрын

Yes you can. Thanks for watching please Like, Share and Subscribe if you haven't already

@kyonglee90 Ай бұрын

thank you so much......😊

@BIGWILLSCARCARE Ай бұрын

You're welcome. Thanks for watching please Like, Share and Subscribe if you haven't already

@jefferylon Ай бұрын

I come to this video every time it comes on ur the best just do what he says and ur good !!!🎉🎉🍺🥹🥹🥹🥹🙏🏾🙏🏾🙏🏾

@Anthony-rv3hr Ай бұрын

I'm about to do this job this weekend. This video helps a lot. I wish I didn't have to mess with the belt.

@BIGWILLSCARCARE 17 күн бұрын

Glad it helped. Thanks for watching please Like, Share and Subscribe if you haven't already

@850CANE Ай бұрын

Hey what year sonata is this? Thank you. I have a 2008 and it says I have two catalytic converters I don't know which one is bad. Possibly both i suppose

@BIGWILLSCARCARE Ай бұрын

This is a 2011/2012. You can have a shop check it out and tell you which one is bad then you can change it yourself. Thanks for watching please Like, Share and Subscribe if you haven't already

Ең жақсы KZbin

Пікірлер