Nic3, got any in the uk?

Any advice for calibration? It seems that option is no longer in the drivers. Mine does not have the settings tab.

Can I get access to the files for each individual piece instead of them all as one file?

What is this for?????

I wasn't exactly looking for this but your video has helped me solve a drift problem in the slider, so new subscriber

Do I need to put the detent magnets or is that optional

I would break it if I tried doing this.

Could I install two sets of indent magnets? one for 50% and one for 75%?

I printed the frame and the spacers out, brought some cheap bearings, and assembled it. Well now it is not just sticky but also very loud and also has some vibration caused by the spring break. I understand now why this is sold as a kit. :D If you try to get the bearings and print out the parts by yourself, be sure the print quality is good and you buy quality bearings or it will be worse. I also greased the rods with silicone spray before hoping for less stickiness, but that also seemed to made it worse and also I didn't clean the rods before installing this upgrade thinking it will be fine. It wasn't.

I received my parts kit yesterday, 6 Jan 24, and this video does not explain with sufficient detail how to assemble the (new?) parts kit. I had to use screws from the TWCS to assemble the parts. I have parts that I could not install because there was no explanation. I was able to complete assembly and the TWCS works better, but I'm unhappy with this video. Are text with photos or drawings available that correspond to the new parts kit?

Can I buy only STL?

waiting on my throttle, does it already come with linear rods/shaft?

How many cm should it be?

just use transparent tape on all surfaces- fixed for almost free...

just did this mod with my 3d printer. thanks!

Why we are using that 70% Whats problem? Sry, im dont have that device and cant understand how its important or not

fantastic work! what is the "spacer_5mm"?

Hey whats those magnets doing there?

Are the detent magnets optional? Because I fly multiple aircraft in DCS including helicopters and and it to be as flexible as possible.

for what is the "stop" at 30%?

This is sick! I am going to pick this HOTAS up and I am not going to wait for the internals to wear out to pick up this upgrade.

What's the difference between the Hybrid 2pl + 2 LM8LUU and the normal 2 LM8LUU if I use the stock friction bar?

Hi I was wondering what are the yellow things that are straight and are used right next to the blade and I know the one on the top is but what's the other one that's connected like or that stopping one thing on the circle thank you

Just printed this, installed it with 4 polymer bearings and the difference is night and day. Really fine throttle control is finally available. Thank you so much for making this available to us.

Why detect magnet are not in the exact middle?

Hola, I installed it according to the tutorial but unfortunately the screw that holds the bridge of the potentiometer rubs against the plastic of the base and the stripe, I have to tighten it very hard but even so if I press the base in the center it rubs against the slider with said screw. Was there an error in printing?

Can't buy this anymore?

I appreciate its a while ago but the link isnt finding this iterm which \i really would like. Have you any ideas as to who to contact about this item? Cheers

Where can I buy this as iv just bought one and noticed the problem straight away Website please.

Any chance you'll be making more soon?

The final test does not look so stable.

anyone got any idea where to source this upgrade for australia? the etsy link is no longer active and ive searched amazon and ebay and cant find this (so far) available anywhere atm :(

I used that design and it does'nt work very well. The gear is made in 2 parts for no reason which makes it easy to break apart.

No longer making it? :/

this still avaliable???

Hi! Would you guys re available for this mod on the website? thanks!

Posted 3rd Nov and arrived 26th Nov, (Canada->UK). Works so much better than stock item. Great video to thanks.

What sping do you use?

I just installed bearings in my controller. In fact, the movement seems a bit smoother, but unlike the stock item, it is much louder, and when moving the throttle forward and backward, the bearings seem to run "dry". Have you also experienced such problems? I'm wondering if my bearings are just poor quality, or maybe some thick grease should be applied there.

I bought this part with polymer sliders for Elite Dangerous. This is an awesome vid and good to follow up to the point where the calibration screen is shown. I have windows 11 and did not see this option. Solution: I reconnected the plug show @0:48 and started the game. I launched a ship into the black and set the throttle to the zero point. Do make sure you have not set a "dead-zone" in the options/control settings. In doing so I was able to put the detent magnets in the correct spot. I haven't even set a dead-zone after assembling. It goes perfectly to zero on the magnet. When putting the slider on, I could already feel the smooth sliding action. I chose the polymer, because ball-bearing might put wear on the slider rod. So far it feels great. It does not stick as the original slider. Quite happy with it so far.

This upgrade turned my TWCS from a disappointing waste of potential, to the best throttle for precision control there is. I used the metal bearings in combination with a very generous amount of Nyogel 767A, and this gives me the stable fine control I need for hovering and landing helicopters. Some people say they get problems with the Nyogel grease- if that's the case, it's probably due to not using enough. I added the Nyogel until it would not take any more, now it moves smoothly and precisely through the whole range of motion, like the dampened motion of a microscope dial, only linear rather than rotational.

Absolutely amazing mod. Throttle no longer sticks and moves very smoothly. Polymer bearings were a perfect choice and are extremely quiet. Thank you!

Kind Sir :) I've received my order, which was very well packaged btw, watched your instruction vid and replaced the component in my Throttle ... Buttery smooth throttle and all i can do is convey my gratitude for your solution as the default component was a drag to play with. Again, Thank You! o7

Never used a throttle before, which detent option should I go for?

Which clearance size is recommended for 70% detents? Or is that size only dependent on the thickness of double sided tape?

I got it today and installed it with help of this guide. Works great, thanks! One small remark: at 2:41 you are showing the TWCS Throttle Properties, but these properties are from the standard windows drivers. If you have the drivers installed from the thrustmaster support site, you get a different interface without the calibration options. I had these drivers installed and I removed them by downloading the executable from the page in this post and running the installer. Then I got the options like shown in 2:41.

Just installed this mod. Turns what would normally be a POS into a usable product. Stiction is completely gone, Went to split throttle with a 50% detent. I can increase/decrease the throttle in very small increments. Great upgrade.

I'm in desperate need of this mod! Any idea of when these will be available again?

Can I get a quick rundown on the diff types available?

omg i just got my throttle today and it's just as bad as everyone is describing. I thought people were exaggerating how sticky the slide is, but it really significant force to move it a small amount of force. Ordered my slide the other day, really looking forward to replacing it with your product :D