Barely even looked like a filter with all that build-up on it!
@robertrobinson88724 күн бұрын
What's size bolts are on the rocker cover please.
@mechanicallymindedmike96774 күн бұрын
8mm 10mm or 12mm. Really can't remember. Sry
@matthewsayers54514 күн бұрын
I take it the oil is like that as well.
@mechanicallymindedmike96774 күн бұрын
Even after using stp oil flush. Oil still come out lile syrup. But warm and steamy .. lol
@mechanicallymindedmike96774 күн бұрын
Wish I said ti customer soon it's not worth saving. Cos shortly after driving bottom end knock. Shit load of fresh oil in intercooler, and loads blue smoke
@matthewsayers54514 күн бұрын
@@mechanicallymindedmike9677 Stupid question I'm about to ask. Has this thing ever had an engine oil and filter service in it's life, because how dumb can people really fucking be to neglect a car.
@matthewsayers54513 күн бұрын
@@mechanicallymindedmike9677 I'm calling BS on that. Hasn't been changed for about 30,000 miles I'd recon (just spitballing a number). What year is the car and what was the engine at by this time.
@ianbirch58118 күн бұрын
Are these engines as bad as people say ?
@mechanicallymindedmike96778 күн бұрын
It's hit n miss tbh butt. Some people are really lucky and others are not. Injectors fail, but this is common in any diesel car thou. Maintenance is vital! In any vehicle..
@ianbirch58118 күн бұрын
@@mechanicallymindedmike9677 cheers for the reply , i’ve just bought a 2017 20d XF with 31k , runs great but the reviews on the engine are terrible , on the flip side i had a Volvo 1.6D with the psa engine , had 160k on , oil changed every year & was still champion , when i bought it with 30k on i was told they were terrible engines & would always be forking out , in 7 years i never had any bother
@deiondowds14 күн бұрын
Hiya mate, my reverse cam work fine on my sons 2012 polo, my issue is when he’s finished reversing and goes into 1st or neutral he gets a blank screen with no signal displayed this lasts for 30 secs or so b4 the normal radio/dab comes back on. Any help would be appreciated
@mechanicallymindedmike967714 күн бұрын
How have you wired the camera in? Have you used the reverse switched live from stereo? Or using the reverse light itself?
@deiondowds13 күн бұрын
Hiya mate not sure as a friend wired it in for me, i think he went from the bulb though. Also my factory settings are different to yours are there any secret ones that android have? Is it better to go via rev live switch?
@mechanicallymindedmike967713 күн бұрын
100% use rev line fro. Headunit. Radio controls it then through canbus network so should speed u up a bit m8
@deiondowds13 күн бұрын
Cheers mate, much appreciated. My other question is if i got parking sensors added (aftermarket) it has a lil speaker control box, can this be added to the head unit so they work with the reverse cam lines and the picture of sensors displayed
@mechanicallymindedmike967713 күн бұрын
I'd have to be looking at what was there to figure out best way to integrate them tbh mate. Wouldn't like to advise you with looking first. You can use the switched live from headunit yes. But the sensors themselves need (ideally needs) to be wired in witj relay, switched live and perm live and I'm sure it can be possible to Integrate to speakers yes, but can't coach without seeing it thou (sry mate)
@Matevim120 күн бұрын
🎉🎉🎉🎉
@GhostKing63025 күн бұрын
I have door information on mines but nothing pops up
@PadmaDorjee26 күн бұрын
Hey Mike, thanks for the video my friend. Is that the only way to remove it or can we get it out from the top without the need to dismantle everything?
@mechanicallymindedmike967725 күн бұрын
If u can get it out through the top. Please share. I couldn't see any way possible. But I'm always willing to learn from others.
@mechanicallymindedmike967725 күн бұрын
There's such a long section after the dpf see, I can't see how you'd fish it out through top. Unless u chopped dome off maybe. Really don't think it can mann
@AOG_ETH27 күн бұрын
Will the very bottom black piece. Pop off without removing the entire bumper? I suppose it is the beauty cover at the bottom. There is a small hole covered on it. That should help better describe it.
@mechanicallymindedmike967726 күн бұрын
It's been nearly 3 years since I worked on this sorry butt. Really can't remember. So sorry
@AOG_ETH26 күн бұрын
@mechanicallymindedmike9677 thank you.
@b12jak51Ай бұрын
Body coloured bumpers
@Tune2Race_Ай бұрын
Hi where are you based?
@mechanicallymindedmike9677Ай бұрын
South Wales m8
@adamfaulkner1327Ай бұрын
❤️
@mechanicallymindedmike9677Ай бұрын
Thanks m8
@kunalarora6487Ай бұрын
hi is your camera ahd or not
@mechanicallymindedmike9677Ай бұрын
Not. Just a cheap 1 from ebay m8
@OrlandoAragon-ue6ktАй бұрын
hola, instalé estereo android a ford ranger 2017; canbus RAISE ; pero el indicador de puertas abiertas las pones invertidas, si abro la puerta donde manejo, me indica abierta la puerta trasera; podrás ayudarme por favor ya que PARAMETER SETTINGS no me sale
@pmas27Ай бұрын
I thought we would see what’s behind the metal box
@mechanicallymindedmike9677Ай бұрын
Something magical
@kaimcloughlin89812 ай бұрын
What happens if you dont bleed the caliper?
@hibb14372 ай бұрын
How much does it cost for to replace including labour
@mechanicallymindedmike96772 ай бұрын
Half an hours labour fella. Plus part
@garywinterbottom2 ай бұрын
Looks an old old belt yes they are strong but not indestructible i always did mine on the dot but have now got 1.3 ddis chain and kia sportage also chain drive 😅
@hgvnovice20112 ай бұрын
Just attempted to do mine same car. Not a chance got a friend with a garage cut the square off heat the nut and air gun it off with while was roasting. Terrible design
@mechanicallymindedmike96772 ай бұрын
Horrific design!
@bunti672 ай бұрын
Found your Video, an hour to late. I don't know what genius engineer, got this idea for this mounting mechanism. Tried to change the Bumper in the backyard. Not possible. Next week in will destroy the bolds an cut open the the metall box an change everything. No wonder the hyundai car dealer wanted 900€ for the "simple" change of the rear bumper.
@mechanicallymindedmike96772 ай бұрын
Horrid job init...
@bunti672 ай бұрын
@@mechanicallymindedmike9677 The worst. I wrote an articel in the german hyundai forum, to warn everybody. I asked another hyundai dealer and they told me, that their typical procedurce is to destroy the metal cover of then the nut, if it didn´t worked initialy with the impact wrench.
@bunti672 ай бұрын
@@mechanicallymindedmike9677 Just to be on the safe side. The lower nut also fits on the upper bolt, right? I have just ordered the new bolts for the top and the nuts for the bottom from Hyundai. Two bolts and four nuts together cost €85 in Germany. Here are the part numbers: bolts 55395A and for the nuts 54659.
@mechanicallymindedmike96772 ай бұрын
I was able to reuse that aluminium square bolt. Didn't think to try the nut itself. Tysm for sharing the information. It'll help others tremendously
@bunti672 ай бұрын
So. I finally got it done. The Nuts work for both. So before you start. Just purchase Two Bolts and four Nuts with the Partnumbers i wrote before.
@Fekillix3 ай бұрын
The arrow on the tensioner on mine was about 10mm off when I changed it.
@mechanicallymindedmike96773 ай бұрын
I'd always recommend changing by age or mileage for this exact reason...
@johncarroll9933 ай бұрын
Possibly just a leak off pipe O ring. The diesel really sprays out. I had the same issue with the 1.8 tdci. Very cheap to replace, Lidl my have them. Just make sure to release the clip when pushing the pipe back in.
@НадирШафеев-ж9ы3 ай бұрын
❤❤❤
@Chillguy28203 ай бұрын
Please tell the owner to clean his car
@7rodo3 ай бұрын
Money shifta
@muflah3 ай бұрын
Are you sure it wasn't abused?
@mechanicallymindedmike96773 ай бұрын
2 owners current owner says they've had problems with clucth since they bought it (was 17ish k when bought)
@nakibislam18013 ай бұрын
What route did the customer end up going with
@mechanicallymindedmike967728 күн бұрын
Come back for further diag. Refitted oem maf- went back to normal. Further diag showed a stuck turbo actuator also
@ricowswave13243 ай бұрын
You have to do all that process just to replace that module? Hyundai and Kia made that really awkward tbh
@mechanicallymindedmike96773 ай бұрын
Someone below has mentioned about removing rear subframe (dropping it down) the issue I find then is rear subframe bolts are rotten
@ryancrichton89103 ай бұрын
Lad 4 bolts lower the subframe can pull it out from the back lot easier
@mechanicallymindedmike96773 ай бұрын
You've seen these subframe bolts yeah... wish it was that easy. Hate these rust buckets
@Philip-dp6cy4 ай бұрын
get it back out of permanent ignition mode
@mechanicallymindedmike96774 ай бұрын
I'm sure it was just press once and it tuned off. If not press and hold for about 10 seconds
@Philip-dp6cy4 ай бұрын
Hi how do i get the ignition lights out of permanent ON
@mechanicallymindedmike96774 ай бұрын
Not sure what lights you're referring too. If you mean the DRL, then they're on permanently and dim when side lights or dipped light's are turned on. If you want to get out of permenant ignition on aka, out of diagnostics mode. Then you just press the start button once more and it'll switch off.
@aciddiver19784 ай бұрын
Easypeasy😊
@djdemon92674 ай бұрын
Love it, keep up good work
@trackattic4 ай бұрын
Thanks
@mechanicallymindedmike96774 ай бұрын
Glad it helped
@TheJohnson8614 ай бұрын
What happens if it snaps/slips???
@mechanicallymindedmike96774 ай бұрын
Engine will have a catastrophic failure.
@simbob3215 ай бұрын
Just drill it out or use vice grips
@justinholmes56145 ай бұрын
My father in law gave me one of these, it’s awesome
@mechanicallymindedmike96775 ай бұрын
I agree mann..
@swms96795 ай бұрын
This tool never works, just rounds off the screw
@justinholmes56145 ай бұрын
Works every time for me
@HaraDayaful5 ай бұрын
Really gotta make sure the bit seats correctly and deep.
@mechanicallymindedmike96775 ай бұрын
If u use the right head, you get some decent results 80% of the time
@ACSharkey5 ай бұрын
Impact driver
@mechanicallymindedmike96775 ай бұрын
Thanks butt.
@trevorlahey14875 ай бұрын
cheers mate appreciated for the info
@davem41315 ай бұрын
What point were you referring to?
@tonykast19736 ай бұрын
Thank you for your quick reply and information, you have been a great help, many thanks to you
@tonykast19736 ай бұрын
Thanks Mike, that was really bugging me, I've had a look but I can't see how to turn of the reversing camera, mine comes on due to the canbus decoder, do you how to do it please.
@mechanicallymindedmike96776 ай бұрын
So the newer models come with a same coloired wire pre cut and bridging them together turns it off. Others you'll need to use a multimeter. Find the wire that goes 12v feed positive when you go into reverse. Then chop that wire. Should sort you out mate.
@fatehranks6 ай бұрын
Which wire do i need to disconnect on canbus for radio draining battery. Is it red and yellow ones
@mrlister20006 ай бұрын
I'm a mobile tyre fitter, and those pin design locking wheel nuts are the bain of my life, as you can guarantee the garage monkey with his new F1 Airgun he got for Christmas will have used all the newtons available in his new toy to put those things back on. He will have also rounded the pins, making it useless. A friend of mine makes a living travelling the country removing those, and other typres of locking wheel nuts
@mechanicallymindedmike96776 ай бұрын
That comment made me cry for you and also lol at same time. Don't envy you having to do that regularly mate. You're dead on thou!!
@seemaabАй бұрын
@@mechanicallymindedmike9677 Great video! Quick question what sticks did you use and what voltage? Thanks
@Ruslans786 ай бұрын
Is it worth it to do that by itself or it’s better bring to main dealer?
@mechanicallymindedmike96776 ай бұрын
Depends how much money you got to spend fella.
@PeterGormanEnnis6 ай бұрын
Thanks Mike. I like your comment at the very end. Hope you cooled off! I had to do this a good few years ago and I have to do it again. Like you said, you may have to swear, cry, get hurt etc.