Пікірлер
@Uppimusa
@Uppimusa 17 сағат бұрын
Mau belajar juga❤❤
@audioware1
@audioware1 23 сағат бұрын
Not so clever, What about ESR ???
@SwapkillProject863
@SwapkillProject863 Күн бұрын
Honestly I was thinking about this method because people say reviving battery like that is bad but if I’m not mistaken doesn’t that basically normal when your battery are connected like that in some powerbanks😅
@10minutefix
@10minutefix Күн бұрын
Yes
@user-milad72valikhani
@user-milad72valikhani Күн бұрын
Beautiful
@10minutefix
@10minutefix Күн бұрын
Thank you.
@herobrine6514
@herobrine6514 2 күн бұрын
You have connected the battery in series not in parallel
@PieterWillemse-j7t
@PieterWillemse-j7t 2 күн бұрын
Good morning sir i have a problem with my motorcycle
@kucingganteng3148
@kucingganteng3148 2 күн бұрын
So there are 2 tricks then? 1. Manually push down throtle with lever switched ON while kneeling down the saw. 2. And yours with half choke lever only. I think you're the first one mentioning it, very nice, way simpler than trick 1.
@10minutefix
@10minutefix Күн бұрын
Thank you and by the way the first one is dangerous if you are not careful.
@kucingganteng3148
@kucingganteng3148 6 сағат бұрын
​@@10minutefixcan it start if i use only half choke lever on cold start?
@muyundamuyunda3304
@muyundamuyunda3304 3 күн бұрын
Sir I wanted to find out why my generator does not supply power needed to operate portable welding machine the power coming out it small that i need to adjust at low for me to weld?
@adriancowell6850
@adriancowell6850 3 күн бұрын
That's the easy part. Then it's good luck navigating Briggs & Stratton's web site.
@10minutefix
@10minutefix Күн бұрын
Thats true
@nakinajay
@nakinajay 4 күн бұрын
Then why not use the known good battery?
@aliaskong1723
@aliaskong1723 5 күн бұрын
👍
@ianrokeby400
@ianrokeby400 5 күн бұрын
just bought a new machine with this trimmer head. Replacing the trimmer line has proved exceptionally difficult, even with KZbin help. larger sizes will not feed straight across at all after repeated attempts. Finally went and bought some .065" line and finally got it to work. I was on the verge of returning the unit!
@AbimelethFlores
@AbimelethFlores 6 күн бұрын
🤝🏼
@MiniBikeNoob
@MiniBikeNoob 6 күн бұрын
Thank you! 🙏🏽
@10minutefix
@10minutefix 5 күн бұрын
Any time!
@jimmoravec1326
@jimmoravec1326 6 күн бұрын
First make sure your spark plug is good
@10minutefix
@10minutefix 5 күн бұрын
Always
@anthonyleon795
@anthonyleon795 7 күн бұрын
Be smart. Use a proper resistor to discharge your capacitor. Not a screwdriver.
@10minutefix
@10minutefix 7 күн бұрын
It’s ok to use a screwdriver.
@donmiller4885
@donmiller4885 7 күн бұрын
I was told to hold the throttle wide open in the run position while pulling the cord.
@10minutefix
@10minutefix 7 күн бұрын
This is the safest way to start it. Running it with the throttle wide open is really unsafe.
@donmiller4885
@donmiller4885 7 күн бұрын
@@10minutefix with the brake on of course
@donmiller4885
@donmiller4885 7 күн бұрын
@@10minutefix it dries the plug and starts real soon I've been successful doing it that way many times
@johndunbar4660
@johndunbar4660 7 күн бұрын
Heading says how to test the solenoid so you try to bypass it,witch you did not,....conect 1 solenoid to another one and don't even test the solenoid. Weeds?
@10minutefix
@10minutefix 7 күн бұрын
What?
@JonathanJones-m7d
@JonathanJones-m7d 8 күн бұрын
Thanks boss!!!!!!!!!!!
@10minutefix
@10minutefix 8 күн бұрын
Thanks for watching
@bigindydaddy
@bigindydaddy 9 күн бұрын
That worked. Gracias 🙏🏼
@dozog
@dozog 11 күн бұрын
Clever way to test a capacitor... Test the capacitor.
@bve7397
@bve7397 11 күн бұрын
This is wrong? If your ignition coil is within spec and you still have no spark, it could be your cdi
@10minutefix
@10minutefix 10 күн бұрын
No. You’re wrong. First of all saying “it could be” means you are unsure and it could be something else. Second of all, this is an engine that does not have a cdi.
@andrewbeveridge3006
@andrewbeveridge3006 11 күн бұрын
Doesn't mean it's good.... starter under a load is far different from starter motor with no load.
@Mark-vd8oi
@Mark-vd8oi 11 күн бұрын
THEN U WIND UP WITH TWO CRAPOLA BATTS. BEST TO BUY A NEW ONE EVERY YEAR
@10minutefix
@10minutefix 11 күн бұрын
Never happened
@afshinzand220
@afshinzand220 11 күн бұрын
Brief and informative. Thanks 🙏🏼
@10minutefix
@10minutefix 11 күн бұрын
Thanks for watching
@ethansengineering911
@ethansengineering911 12 күн бұрын
If your battery voltage is too low to charge your battery, just get a nice old battery charger that puts out 14 straight volts, no matter what
@Raffuentes030999
@Raffuentes030999 13 күн бұрын
Ohms in the rotor is that a bad rotor?
@X.x.X369
@X.x.X369 13 күн бұрын
So we calling them black and red now?
@10minutefix
@10minutefix 13 күн бұрын
Always.
@Hackinggaming-420
@Hackinggaming-420 14 күн бұрын
kzbin.infoM3SbZwTPxps?si=e5h2m605vvXShbgk
@Hackinggaming-420
@Hackinggaming-420 14 күн бұрын
kzbin.infoM3SbZwTPxps?si=e5h2m605vvXShbgk😊
@marioflores9450
@marioflores9450 14 күн бұрын
What if the test are all good? And still no power?
@10minutefix
@10minutefix 13 күн бұрын
Then the issue is the lines from the stator to the outlets. Maybe the breakers.
@phillyboyrealtalkvideos943
@phillyboyrealtalkvideos943 14 күн бұрын
Don't
@10minutefix
@10minutefix 14 күн бұрын
Do
@phillyboyrealtalkvideos943
@phillyboyrealtalkvideos943 14 күн бұрын
Just take it to auto zone and charge for free
@10minutefix
@10minutefix 14 күн бұрын
If it’s too low to charge then they can’t charge it. That’s why you should do it this way.
@236vic
@236vic 14 күн бұрын
When does a capacity release its load and is that load controlled?
@ziachild
@ziachild 14 күн бұрын
Took me 3 minutes to do this although I did have to remove the outside ring to press the black wheel down to get the string exactly right through the other side. It was susper simple and easy cause of this video thank you!
@SerlanSadiasa
@SerlanSadiasa 15 күн бұрын
How much isa
@mhnjhbjnokl5904
@mhnjhbjnokl5904 15 күн бұрын
..or the cdi is bad, or the battery, or the stator or the ecu. You oversimplify things
@10minutefix
@10minutefix 15 күн бұрын
It is simple. You complicate things. It’s not the stator or the battery, or the cdi or the ecu.
@peytonkingsley2691
@peytonkingsley2691 16 күн бұрын
Its way faster and works better if you just hold the throttle and start it that way
@10minutefix
@10minutefix 15 күн бұрын
I’m not trying to show how someone can hold the throttle and have the chain running while potentially cutting their leg off.
@rockyrocko300
@rockyrocko300 16 күн бұрын
What to do if my battery is voltage is too high 14.85+ while car is on ?? It’s a new battery and alternator also ! 2015 Ford Fusion titanium.
@AungKhitthit-u4u
@AungKhitthit-u4u 17 күн бұрын
How Mart
@PyricDemon
@PyricDemon 17 күн бұрын
I need an explanation for how and why this would be fine. My knowledge on batteries (granted only 18650's), say never connect 2 batteries like this unless they are very close to the same voltage because they would equalize as fast as possible causing immense heat and possibly destroying the batteries. There's missing info in this short, I'm assuming both batteries are dead while the "good" one is still visible by the charger and not just a full battery being plugged into a totally dead one, right?
@10minutefix
@10minutefix 16 күн бұрын
The good battery is fully charged. I have worked on units that have 4 batteries connected together and I’ve had to find the one dead one. I have never had an issue connecting two batteries in series or in parallel.
@dwmcever
@dwmcever 18 күн бұрын
First learn what the terms you are discussing actually mean. Especially resister, ohm, watt and uf.
@CharlesTereka-g7d
@CharlesTereka-g7d 18 күн бұрын
Generator RG6700K typeof AVR
@Iqraansari-hg5bh
@Iqraansari-hg5bh 18 күн бұрын
Price kya hai
@markbanana5775
@markbanana5775 18 күн бұрын
The engine still runs right?
@10minutefix
@10minutefix 16 күн бұрын
Of course
@afshinzand220
@afshinzand220 18 күн бұрын
What if the voltage is fluctuating?
@10minutefix
@10minutefix 16 күн бұрын
I have a video on testing the stator and rotor. If that passes the. It has to be the avr.
@HVACR_LIFE
@HVACR_LIFE 19 күн бұрын
Is this direct or gear reduction
@christophervarela7699
@christophervarela7699 20 күн бұрын
I'm sore from trying to start my echo cs-310 chainsaw. I finally got it started and tuned it up with the high and low screws.
@10minutefix
@10minutefix 16 күн бұрын
That’s good. Hope you adjusted them properly.
@CalvintheterribleIbarkateveryo
@CalvintheterribleIbarkateveryo 20 күн бұрын
I ran mine and it got hot with the shipping plug. Lower pressure then before, fixable or get a new pump?
@10minutefix
@10minutefix 16 күн бұрын
Anything in this world is repairable. Is it worth it? That’s another question you probably blew the seals and they need to be replaced.
@ryanconneway402
@ryanconneway402 20 күн бұрын
Why are people so terrible when it comes to making these videos?
@10minutefix
@10minutefix 20 күн бұрын
Instead of talking crap don’t watch moron.