14 сағат бұрын
16 сағат бұрын
16 сағат бұрын
Ай бұрын
Ай бұрын
Ай бұрын
Ай бұрын
Ай бұрын
Ай бұрын
Ай бұрын
Ай бұрын
Ай бұрын
Ай бұрын
Ай бұрын
Ай бұрын
Ай бұрын
Пікірлер
@samgibson684 Күн бұрын
I like that rathburn stretcher, very informative video! thanks!
@EntertainYTshorts-o1b 2 күн бұрын
Can you please tell me the name of things that used for joining coin ring
@garyanddoris6022 3 күн бұрын
Nice work 👏 👌 👍 Ive been making coin rings also about 8 years now , just not really pushed the sales of them , I also make quite a few spoon rings 💍, but yeah its not against the law to deface coins, now paper money different story ...
@Ohnochokin 3 күн бұрын
Very nice working video✨✨✨ I enjoyed it🙏
@TannerCarter-h3u 4 күн бұрын
What was the tool you used to cut them with you was spinning in arouns
@lefthanddrummerable 4 күн бұрын
The center that gets punched out, can you mount that on the ring.
@CoinRingMaker 4 күн бұрын
I’ve seen some people solder it on the ring, I make them into keychains. I don’t like how it hides the details on the band.
@lefthanddrummerable 4 күн бұрын
@CoinRingMaker right, i thought of that too. I have one my dad brought back from Germany made of a German nickel, they stamped this crazy lookin eagle out of the center and soldered it on the ring. My dad traded a pack of cigarettes for it
@GodSpeed_HI 4 күн бұрын
What tools are you using? Love this
@CoinRingMaker 4 күн бұрын
coinringmaker.com/recommended-coin-ring-tools/
@The2012SRC 5 күн бұрын
Great but the more ornate side out
@HOLLYHOUSE11 5 күн бұрын
Man wd 40 would change your whole life.
@HOLLYHOUSE11 5 күн бұрын
Dude!! WD40 and the ring will slide off easily.
@robwhitehair8448 10 күн бұрын
Hey love your videos!! But your recommended tools site is down? I wonder what quarter center punch and die you recommend? Thx
@CoinRingMaker 9 күн бұрын
Site is back up now. Sorry about that.
@mumzly1 11 күн бұрын
Did you get that debuting tool at a True Value? I have the same one and it came from there.
@CoinRingMaker 9 күн бұрын
Yeah
@MM-sq5pf 12 күн бұрын
Where do I find that center punch that is specifically for quarters? The little bugger
@CoinRingMaker 12 күн бұрын
www.ebay.com/itm/274313719531?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=VkeSJvKXTIu&sssrc=4429486&ssuid=NEykm3aGTRG&var=&widget_ver=artemis&media=COPY
@MM-sq5pf 12 күн бұрын
@CoinRingMaker thank you! Great videos!
@CoinRingMaker 12 күн бұрын
Thanks for watching! You may find some other things you might want here. Check out this page from coinringmaker www.amazon.com/shop/coinringmaker?ref_=cm_sw_r_apin_aipsfshop_5CWQD7HQQ0R8T6DVDDAJ&language=en_US
@J5productiins 12 күн бұрын
I have a brass punch to push the steel punch
@MM-sq5pf 12 күн бұрын
Would you recommend just buying ball bearings instead of doming kit?
@CoinRingMaker 9 күн бұрын
The doming block is really all you need. That and delrin balls is what I use now. Ball bearings are good but delrin leaves more details. 3/4 inch delrin balls and a doming block and you should be set.
@Chris_on_tiktok 15 күн бұрын
Would you be able to design one that holds 100$ worth of quarters and how much would i have to pay you to buy it off of you?
@CoinRingMaker 9 күн бұрын
I am interested in this idea. Would you mind emailing me so we could discuss it further? [email protected]
@LMde20 15 күн бұрын
Aren't they both rotated about 180 degrees? Or are US coins supposed to be like that?
@CoinRingMaker 15 күн бұрын
The 2nd one is about 10 degrees off.
@Offscript1 15 күн бұрын
Did you have any problems on the kobra 3 with leveling and first layers?
@CoinRingMaker 15 күн бұрын
When I first got it yes. I tried messing with the z-offset. Don’t recommend that approach. I factor reset then updated the firmware and haven’t had any problems since.
@Offscript1 15 күн бұрын
@ I’ll give that a try thanks!
@CoinRingMaker 15 күн бұрын
Just a heads up, you have to use the mobile app to update the firmware.
@Offscript1 13 күн бұрын
@@CoinRingMaker Got my first layers printing much better thank you. Just got the kobra 3 a week ago and it seems to be pretty good once you get it tuned in. Look forward to seeing more vids on the k3!
@JamesGraham-p5r 16 күн бұрын
Use an opened wrench that matches the ring it hits it flat and won’t destroy your work !
@ShaunAshcraft-z3c 17 күн бұрын
Can I use a ring stretcher/ reducer, hole punch, and a doming cone only to make a ring? Using the reducer / stretcher for the press?
@rathernotsay9188 17 күн бұрын
2 birds with one operation, make a ring and also DIY drain hole in the concrete floor.
@murdermuseum8280 19 күн бұрын
what do you do with the piece you punched out?
@CoinRingMaker 19 күн бұрын
Make them into keychains
@xbigbobsagetx 19 күн бұрын
So Iv been watching this content for about a day. I kinda want to do this with Unpesos (1957-67) they’re cheap. Have a fraction of a bit of silver content and people don’t tend to like them. The coin is pretty big though. I wonder what I would need for something that big?
@CoinRingMaker 19 күн бұрын
Probably a larger sized 17 degree die and a different punch.
@xbigbobsagetx 19 күн бұрын
Been watching your videos all morning. I have a few unpeso coins. (1957-1967) 10 Percent silver and essentially the rest is bronze. Big coin. Would these be ideal to use for rings? Or too big?
@Superb_Owl80 22 күн бұрын
Do you think it can make one as small as a size 7?
@CoinRingMaker 22 күн бұрын
I can get them down to size 4
@Superb_Owl80 22 күн бұрын
Thanks for the quick response! I may need to try this myself
@TheWickkit 24 күн бұрын
Isn't it a federal crime to do stuff like this to money? I know it's a creativity thing but... Just use washers or something else, I mean, I guess I'm just a troll or whatever when it comes to this issue...
@Outdoorballisticsyt 25 күн бұрын
Noooo 😢😢not a Morgan dollar I wouldn’t care for an Eisenhower dollar but that is prob thousands
@fredt.3530 26 күн бұрын
Great video and I appreciate all of your helpful tips. I have a question that no one else has addressed in any of the comments. Where do you sell these and what kind of money do they sell for, maybe some of your commenters could also weigh in on this.
@CoinRingMaker 26 күн бұрын
When I started I sold them for $5 now I charge $30 after 6 years of making them.
@MarkKelly-b5t Ай бұрын
Greetings from Ireland. Can you use the press to punch out the holes instead of hammering? Nice work by the way.
@CoinRingMaker Ай бұрын
You can. It’s tough to do a 1/2 inch punch in a quarter with a 1 ton though. Plastic hammers are like $5. I much prefer using them.
@CoinRingMaker Ай бұрын
Can A 1 Ton Arbor Press Punch A Hole In A Coin? kzbin.info/www/bejne/nnScZHmXoKajbLs
@MarkKelly-b5t Ай бұрын
Great video. Thanks for sharing.
@CoinRingMaker Ай бұрын
Thanks for watching 😎👍
@raymondmartin645 Ай бұрын
Can you make them into horseshoe shape necklace charms?
@Jeffery-w2f Ай бұрын
Greetings from the frozen bank of lake superior i just trudged to the mail box and holy crap xmas came early the wife got me a deburr buddy and my fingers and thumbs are smileing big time thanks man i got really sick of trying to fab one ill be buyin the half doller one shortly thanks again and im the change bender from the frozen twin ports outtie for now thanks for your great content
@CoinRingMaker Ай бұрын
Very happy to here you like my tool. Thanks for watching!
@TheArtisansTouchUK Ай бұрын
Everybody please stay away from this company. Printer works nice for about 30hrs and is getting funny issues. Sovol refuses to help
@JJ2000k Ай бұрын
Nice Video! I have copper .999 fine coins, silver dollar replicas. What size die or additional materials would I need for these copper coins to make rings?
@CoinRingMaker Ай бұрын
This is my recommend tool list. coinringmaker.com/recommended-coin-ring-tools/ I do recommend annealing copper, it can be tough to shape. What size are the rounds. 1/2 oz are much easier to work with than 1 oz. You’d need 17 degree dies.
@mandybrown7758 Ай бұрын
You do sich an incredible job
@CoinRingMaker Ай бұрын
Thank you!
@VitoVisintini Ай бұрын
A Brass Hammer may make your tools last longer. Great Video!
@dawnhoagland2607 20 күн бұрын
Yes and you get a better strike with not as much bounce.
@Dks-q6t Ай бұрын
Very cool, nice ingenuity
@CoinRingMaker Ай бұрын
Thank you
@Lwimmermastermetalart Ай бұрын
Using a brass hammer is much better than nylon. Not that expensive. They also make ones with interchangeable tips. 👍🏼
@CoinRingMaker Ай бұрын
I don’t like how quickly my steal tools mess up brass hammers. The plastic one lasts much longer and works just fine.
@Lwimmermastermetalart Ай бұрын
@ that’s true except it takes a bit more hitting with nylon , brass just packs more of a punch. But what ever is best for you, is the best. It’s very easy for me to resurface brass tips on my lathe and why I prefer it.
@Goodellsam Ай бұрын
Could youvuse a press on the ring stretcher?
@CoinRingMaker Ай бұрын
You could
@nickknight8065 Ай бұрын
Proof coins in 90% silver can be had for any year. No needs to settle for a clad coin for their desired year.
@CoinRingMaker Ай бұрын
They only started making silver proof coins in 1992.
@nickknight8065 Ай бұрын
@CoinRingMaker I stand corrected. There are 40% silver proofs from the 1970s. But as you pointed out, there are none for the 80s. Thank you for clarifying that for me and others.
@epic2000 Ай бұрын
Garbage. Air Doctor is the best
@fredvv44 Ай бұрын
With the background machine running I can't hear anything you say
@CoinRingMaker Ай бұрын
Sorry
@jeffbezos1453 Ай бұрын
Got mine delivering today. I am very excited for my first Core XY printer
@CoinRingMaker Ай бұрын
Let’s go!
@wadeking Ай бұрын
Ok excellent video..... im pretty sure your name is NOT coinringmaker..... you have an excellent brand with that name but please don't disrespect your faithful viewers by not using your REAL NAME, WE WANT TO KNOW YOU!!!! Thanks!!!!::::))))))
@CoinRingMaker Ай бұрын
Some heroes need masks lol
@wadeking Ай бұрын
Whatever dude...... just use your name now and then..... PLEASE@CoinRingMaker
@angelodallas2009 Ай бұрын
😂😂😂LMAO Dude yer so funny.wtf would you use a hammer when you have a 1ton press? No worries... Ive done dumber. But really, lol.... you have a press🤣🤣
@CoinRingMaker Ай бұрын
This is why. Can A 1 Ton Arbor Press Punch A Hole In A Coin? kzbin.info/www/bejne/nnScZHmXoKajbLs
@angelodallas2009 Ай бұрын
😂😂😂LMAO Dude yer so funny.wtf would you use a hammer when you have a 1ton press? No worries... Ive done dumber. But really, lol.... you have a press🤣🤣
@angelodallas2009 Ай бұрын
😂😂😂LMAO Dude yer so funny.wtf would you use a hammer when you have a 1ton press? No worries... Ive done dumber. But really, lol.... you have a press🤣🤣
@angelodallas2009 Ай бұрын
😂😂😂LMAO Dude yer so funny.wtf would you use a hammer when you have a 1ton press? No worries... Ive done dumber. But really, lol.... you have a press🤣🤣
@adamhuffman3354 Ай бұрын
Neat👍
@CoinRingMaker Ай бұрын
Thanks!
@lillianquintana Ай бұрын
I’m sure he did😂😂😂😂
@colinmsmall Ай бұрын
Do you print in anything other than PLA, such as PETG? I’m really curious how well the sv08 handles support removal with PETG. Bambu does it really well and other do not always.. so I’m curious if the supports break away easily and cleanly
@CoinRingMaker Ай бұрын
So far just PLA on this printer but supports have removed just fine.