I think you may have solved an issue for me. I bought 700 dollars worth of these lights. 1st contractor was going to put them in but have a new one now. Anyways, the orange 2 prong obviously not adaptable to the white 3 prong. Where do you get the junction box from? I wish I could show you what I have. I went to Home Depot they couldn’t help. However this seems to be the resolution. I do believe the electrician will have to rewire all the recess lights for that junction box.

Does this still work for you? I got one used and it did the exact same thing with the solar cover but it never made it past the first blinking light and will not charge anymore even from the wall. I've been back and forth with customer service for weeks and they want me to buy a new fan unit but I took it apart myself and had the battery pack rebuilt and it still won't recognize that it's charged or charge the new battery. It's infuriating.

Next time use a cutoff disk instead of a grinding disk. I was wondering why it took you so long to cut through that thin plate.

I have 2 x f3800 + extra battery for each with their smart home panel connected to my home panel that also has 17.22kWh of solar connected to one Powerwall 3 and backup gateway 2 for whole home backup. The Anker is set for time of use via the home power panel and charges up during peak solar and feeds my internal home loads. Even though I have a critical loads panel running off of the Anker smart home panel, no circuits are in the sub panel. The Anker smart panel uses an algorithm and voltage/frequency to back feed into the main panel. When it does this, my Tesla Powerwall sees 0 draw from my home and either recharges the Powerwall or feeds the energy back to the grid. I originally ordered the Anker F3800s during their kick starter campaign before we decided to get solar and a Powerwall 3. Both system works well together and I only pull from the grid if both the f3800s and powerwalls are empty with no sun or if the overall power draw exceeds the 6kW of the Anker and what solar and powerwall 3 are providing at the time. (Even though 2 f3800 should be able to provide up to 12kW, it will only do so to loads in the critical loads back up panel). you have to go to both Tesla and Anker app to see the whole picture. It is a whole lot easier to add additional capacity to the Anker vs going through a Tesla Powerwall installer to expand our Powerwall capacity.

Never stated I am using a wired backhaul this is a comparison of wireless backhauls

With a wired backhaul to the satellite, you should be getting your full ISP speed. I have the older version of this mesh system with a 1gig internet connection, wired backhaul to all my satellites and when I connect my computer via LAN to a satellite, I get same exact speed as the router sees directly from the modem - close to 1gig. The 50% drop in video tells me that you are using wireless backhaul, not wired as you stated.

What Time is this Storm?

EXCELLENT VIDEO Thank You for sharing

AND... it is ETL and NSF

The reason I am thinking about buying this is ONE Reason It runs Quiet ...

Update, got one on eBay delivered from Japan, total cost 280. Well worth it.

Thank you! Great video ❤

I prefer the Samsung jet bot+

I just bought this, LOVE IT! I'm always carrying plastic bins, but they take up so much room. This is perfect for groceries, recycling, a million things! And it folds so small. Thanks for the video because I couldn't remember how to fold it.😂

That’s a lot of $ for charging your car…

Where’s the finger guard go?

how can you remove the light without damaging the ceiling if the springs are holding it?

Anyone try to place a battery one on top of the wires of the old wired unit?

How long did it last since you shoot the video and is it reliable after 5 years of using it

If you just need a vacuum or just have carpet and don't need to mop, we also reviewed the Jet Bot AI+ vacuum: kzbin.info/www/bejne/jYK2gnypiKqMq5Ysi=vBDUHLsOlum9myRK

Guess, what, 3 years after getting the 2.0 this version is still going strong!

Thanks for the great video. Ours asks for a cleaning cycle once a week. If I use white vinegar, I get white hard water scale flakes rinsing out. Never see anything when I use bleach.

how in the world do the fan blades attach to the top ? ? ? ?

Why not add the Anker home power panel to se your ac coupled rooftop solar to charge at 3800w/hr and it has smart TOU and Self Consumption modes?

Great video! I'd be curious to see the comparison of the philips hue with the govee recessed lights. They are much cheaper and govee typically puts out good products.

Do you find that the mop pads still touch the carpet when they are lifted? It looks like they do in the video.

I have had the opal 2.0 for 2 years. My side tank has gunk built up in the side tank where the parts are put together, like the top to the middle and the bottom to the middle. Can you take it apart to clean that?

Thanks for sharing this. Did you choose this over a Delta Pro Ultra system?

Check out our review and demonstration of the new Samsung Bespoke Jet Bot AI Combo Mop & Vacuum: kzbin.info/www/bejne/sIOzk4ymjsSXf5Y

One correction is that, like the Jet Bot AI, it still features JetLive+ Remote Monitoring, which allows you to view your pets at home remotely through the robot's cameras. We don't have pets, so we would not use this feature.

We upgraded to Orbi Wifi 7's and DO recommend them! See our review and demonstration here: kzbin.info/www/bejne/Zp_TYnaFnMaNnbMsi=4TioKtZu9pcrYWfR

The 852 is trash, but only because it’s not an upgrade over the 700 series. They have 1 incoming 2.5 but all the outputs are only 1Gbps……. So guess what speed your capped at? Making this completing pointless. This also means that even if you have a wired back haul……. Guess what that satellite will only receive and output 1Gbps. It almost feels like a scam. In no measurable metric will you get over 1gps.

Thanks so much! Built a small shed with roof nails poking through. I'll puchase these #7 corks & save my head!!

Get an old 90s japanese gocco riso and create your own designs if your really trying to do custom screen printing on paper without the emulsion burning screens mess, this is just a dressed up stamp. Its cool you get to build it for kids etc but for artist and print enthusiasts this probably isnt what you're looking for.

So what about how to use the spiralizer? Not such a good product for dicing in general. I got one for a present...had I bought it I would be disappointed trying to dice some squash. If I have ti use a Knife to prepare the food I might as well just dice it by hand...takes just a few minutes and NO CLEANUP!

FILMMAKER MODE isn't "old school" nor does it "slow the image down". It presents it in the frame rate and color that's intended for it to be seen.

Steak DOES work... let it cool down first! Mandolins have been around for a long time. I just bought one that chops as well.

Dirty shoe bin? Lmao its for a swamp cooler

😂😂😂😂😂😂😂sorry

I AMM GETTING THAT THING NOW

𖣘 🪰 💩 🪰

You're dulling the blade each time you bang it against something

They sell these for $5 on Temu

Perfect soundtrack to it. That crappy piano and you slowly loosing your mind smashing vegetables.

Trend on tick-tock is it? Used to be a trend on the shopping channel. Back then it was called the nicer dicer.

will this get stuck in the skimmer ?

Would it be possible to create your own custom little print out stamping designs for this?

Just want to add, for anyone looking at getting one of these,,,, during Amazon Prime days it was discounted $200. Of course we bought one a month earlier, but am completely happy with it.

How long the battery last?

Hi . Do you know what else.you could do with it? Iam making a English chips, but of course you guys need to use right size potatoes to fit in to that container or you could.use the chopper with deeper bowl, if you want longer chips 😊