7 ай бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@aslandolatshahi3027 Күн бұрын
What size is that fan
@m10stuff Күн бұрын
The link in the description will give you all the details. quietcoolsystems.com/wp-content/uploads/2024/02/QC-AFG-SMT-ES-3.0-V5.pdf
@normbograham 2 күн бұрын
You need a header above the window for the stud you cut. You cut that vertical support, without any transfer to the other studs. You need one on the top, and one at the bottom to replace the action of the cut stud. Also, you did you put a header above the new entrance
@m10stuff 2 күн бұрын
I didn’t show the detail but I built an all new wall on the inside of the window with supports where the 2x4 was cut for the sheathing attachment. To new wall was framed so that no header was needed. There is a header above the new entrance.
@Peopleareusuallygood 3 күн бұрын
You got lucky. My lightning has gotten stuck in the ajar position and will not close or open. 3 dang times. 1 time when i was on a road trip! Stuck at the dealer for 3 hours until they could take it apart and get it to close completely. 2nd time another dealer took 1.5 hrs to do the same. 3rd time i was at home and several hours later it decided to latch closed with me pushing down. I hope the dealer i take it to will properly diagnose and fix it for good.
@m10stuff 3 күн бұрын
I’ve had that happen. After manually closing it, it was fine though
@jcookin 4 күн бұрын
This product needs to fully cure a minimum of 3 days, I let ours cure for 5 days, showing a bit of wear after 7 years, will use this product again. We did put a small bit of non-slip powder on the bottom of the tub in the first coat.
@m10stuff 4 күн бұрын
Good idea. That’s great that you got 7 years out of it.
@25745056 6 күн бұрын
What was the overall cost. And is it doable understair if there is electrical there
@m10stuff 6 күн бұрын
This was $4550 in materials including the city permit. Under the stairs probably would pass a permit, but it may depending on the configuration.
@mr.nuna916 7 күн бұрын
Can this be sprayed?? Looks like it can but Im unsure.
@m10stuff 7 күн бұрын
It’s not recommended. I’m sure you could but you may never be able to clean the equipment completely afterword.
@dokholladay 8 күн бұрын
I'm a licensed home inspector. Posting a video like this without an upfront disclaimer may not be the best idea. I would politely suggest you explain at the beginning that you are qualified to make these alterations and also explain why your method is safe. Many people will watch this video and falsely think they can cut the trusses in their home and slap a few 2x4s in their place, no big deal. NOT TRUE. I see truss alteration several times a year by average homeowners and it is NEVER done the correct way. The cost to repair it before they can sell the home is usually in the $10,000 - $20,000 range.
@m10stuff 3 күн бұрын
I appreciate the advice. I look into a way to do that
@brewinfusedyeti3798 8 күн бұрын
This is a cool project. My attic feels completely unusuable given the trus design. Im building an addition for more storage but attic will probably be my next area of investment/research.
@ocdog45 11 күн бұрын
What is that device you are using to check if the igniter is receiving power?
@m10stuff 11 күн бұрын
It’s a non contact voltage tester. Like this one amzn.to/4cFwqIr
@Dan.Christy 12 күн бұрын
Thank you 🙏
@chuckmaxon3727 12 күн бұрын
I just ordered some of this, thanks.
@donnale3881 12 күн бұрын
After mixing A & B let it sit for 10 minutes, stir, let it sit an additional 10 to 15 minutes to allow A&B to fully mix.
@stephn.869 12 күн бұрын
Would that be considered an acrylic tub?
@m10stuff 12 күн бұрын
I believe so
@bluearcherx 12 күн бұрын
i certainly hope you got an engineer to stamp cutting all those trusses, but it's pretty damn weird that you didn't mention this or tell people that you can't simply cut trusses..... 😮
@m10stuff 12 күн бұрын
They were al reinforced and rebuilt with proper floor joist and roof joists for the load prior to cutting.
@calsmith7902 13 күн бұрын
Do they make different diameter fan ... my Gable opening is on the small side.
@m10stuff 12 күн бұрын
Not that I have found. Most of the smaller fans have built in shutters and you cut your own hole. like this. amzn.to/3AEmP7p. Your best may be to cut a larger opening.
@whosteezy5479 13 күн бұрын
Not on the edge😂😅living on a prayer #jovi
@Cracktown 14 күн бұрын
Dude I did this and now my Pro Power needs service. I’m kinda panicking.
@m10stuff 14 күн бұрын
Dang. It’s probably not related. This is the first I’ve heard of any issues like that.
@Cracktown 14 күн бұрын
@@m10stuffLmao must have been the main cord I didnt plug in fully, just in case you see someone say this again, advise them to pop their frunk out and reinstall and then reboot the truck by holding seek right and volume down for 20 seconds or so
@sophialee771 22 күн бұрын
Whyyy can I not get the bolts undone? What did you use? Mine might have a little more lip than yours so I can't get a tool in easily.
@m10stuff 22 күн бұрын
Shoot. I’m sorry. These were just small bolts so I used the nut driver on my multi tool screwdriver.
@r.becerra3182 23 күн бұрын
Very cool
@johnkim1043 25 күн бұрын
this is an amazing transformation
@m10stuff 25 күн бұрын
Thank you!
@ProvoBeastAudio 26 күн бұрын
That spider wasted no time moving into it's new bathroom.
@knutbk 28 күн бұрын
My truck's back seat makes similar noises in any direction.
@mikemotorbike4283 29 күн бұрын
You would be better off placing it in a new purpose-built opening opposite that huge vent. That beautiful oversize vent compromises attic air passthrough by allowing bypass air in, and the large horizontal metal louvre slats and wood structures impede flow. This is effectively a sabotaged job.
@m10stuff 29 күн бұрын
You’re right. But nobody makes attic vents with a purpose-built opening for a fan. That’s why there are universal fans like this that still help increase airflow in an attic. This is how it was made to be installed. Nothing sabotaged about it. It still draws air in from other vents and blows it out the attic. Mission accomplished!
@user-fb3td6cl9d 29 күн бұрын
Is this a mere colour restoration product or can be used in place of re-enameling also?
@m10stuff 29 күн бұрын
It’s an epoxy acrylic paint that can be used on any hard surface
@user-fb3td6cl9d 29 күн бұрын
Does it work on all types of tubs? Ceramic, cast iron, fibreglass, acrylic etc?
@m10stuff 29 күн бұрын
Yes
@r.powerborn8026 Ай бұрын
Great video, thanks.
@thomo74 Ай бұрын
Very cool. I’m going to have a crack at my place and you’ve inspired me. Thanks
@ThePretect Ай бұрын
Dayum!!!!!
@maxhexen Ай бұрын
Is it 12 or 24V? We would like to plug a louder backup alarm for construction site and I was thinking of using that plug. Thanks!
@m10stuff Ай бұрын
12
@maxhexen Ай бұрын
@@m10stuff great thanks!
@VinceM797 Ай бұрын
Did the customer notice a difference?
@m10stuff 29 күн бұрын
He said he seems like he’s used his AC less this summer. But I don’t have any hard data
@JesseWORKPC Ай бұрын
How did you do that finish on the interior walls of the Bath? Or rather what is that finish called lol? @M10 Stuff
@m10stuff Ай бұрын
Knockdown spray texture. Lots of videos out there showing how.
@JesseWORKPC Ай бұрын
@@m10stuff Thanks!
@Epicfunk Ай бұрын
You got paid before, during and after working on that house! They know what they are doing.
@krakenunbound Ай бұрын
Pro tip, if you have vents on both ends of the attic, you can buy two of these, or other attic fans, and disassemble it to reverse the direction the fan blows and then put it back together. Then have one push while the other pulls.
@m10stuff Ай бұрын
That is a good idea. Especially for bigger attics
@bathroomenthusiast5949 Ай бұрын
M10 Stuff, Was the old circular fan a model with double lights or was the old fan a non-lighted model? I'm just curious.
@m10stuff Ай бұрын
No light. Just a fan
@virgilpalmer2427 Ай бұрын
That is so gross 🤮🤮🤮🤮🤮
@ErnestinaMoya-x5v Ай бұрын
Do you travel to WA? Kitsap County? Could you provide your contact info please?
@m10stuff Ай бұрын
We are located in northern California and only service the local area.
@drdrew3 Ай бұрын
When you need a medicine cabinet in your truck to organize your OCD meds
@m10stuff Ай бұрын
Facts
@wolfpackleader7923 Ай бұрын
🤣🤣🤣
@heathcwalker Ай бұрын
Were the 3 coats all done out of that one can?
@m10stuff Ай бұрын
They were. I should have waited longer between coats and used a new kit for the last coat. But they were drying quick in the heat and ready for another quote before the product was unusable.
@MariaFernandez-px7ts Ай бұрын
I've installed one attic fan on the north side of the house. It's working okay. I'm thinking of adding another fan on the south side for extra cooling. My attic is 1,000 sq ft. Are there any drawbacks to doing this?
@m10stuff Ай бұрын
They will work against each other
@MariaFernandez-px7ts Ай бұрын
The instructions say the attic fan needs to be installed in front of a vent. My house is old with slits instead of vents. Is the vent necessary? The way I see it, the fan will blow out hot air whether there is a vent of not.
@m10stuff Ай бұрын
If it’s not installed at a vent, it will simply recirculate the air in the attic and not blow it out.
@susanfleming920 Ай бұрын
What if you only have access from the bottom lol
@m10stuff Ай бұрын
It is still possibly to do, just more complicated. You’ll have to dislodge the old one and pull the wiring and exhaust ducti down to connect to a new fan
@williamkent2446 Ай бұрын
Without the fan "sealed" onto the gable vent, would it just draw air from outside through the frames around it rather than from the other end of the attic? My old fan is dead, and its just mounted in space behind a large triangular gable vent. I need to get a new fan, and im kinda rhinking i need to board up the rest if the gable vent around the fan. Is that necessary/advisable?
@m10stuff Ай бұрын
It would be better to seal it up. That’s what the shields are for.
@MrBubyV Ай бұрын
Absolutely better than before. One more coat would definitely spiff it up. 👍🏽
@bmcdonald7303 Ай бұрын
Awesome. Thank you.
@thepubliceye Ай бұрын
My Vevor controller has Rev leads,
@elvag3787 Ай бұрын
Can it hold 350lbs?
@m10stuff Ай бұрын
I can’t find anything specifically on weight. But we have had 3 adults on it and it did fine.
@13ghosts50 2 ай бұрын
I’m not crazy about it having an app to operate it. Apps always fail after a few years.
@m10stuff Ай бұрын
Most attic fans don’t have any controls at all. They work strictly off of temperature settings. This is no different. The app just lets you change those setting without climbing into the attic and changing them manually.
@13ghosts50 Ай бұрын
@@m10stuff gotcha.
@13ghosts50 Ай бұрын
@@m10stuff but apps have to be updated frequently to be able to run on whatever operating system you are using. If the company stops updating the app, and you get a newer system, that app may no longer work. It will happen eventually. A mechanical thermostat stops working, you go by a new one cause they operate the same way.
@johnnybcool2906 2 ай бұрын
whats wrong with ryobi?
@m10stuff Ай бұрын
Nothing. It’s just something contractors make fun of because they are low cost entry level tools.
@TK-ri5eg 2 ай бұрын
adding a outlet doesn't make it a dedicated circuit by any means...you would need to go straight to the panel
@m10stuff Ай бұрын
@@TK-ri5eg a dedicated circuit is not needed for these. I was referring to the furnace