I found the OEM for around 160$ while the NGK was like 50$ , so the question is how was the quality and performance of the NGK wires ? is it perfect length (like not a bit long here and there as some of the other aftermarket wires) ? and so far how good is it running ?

just buy one or 2 of those brown paper rolls from Lowes or home depot $12. a roll 100 ft long, and tear your paper from that. I did my concrete floors 20 years ago and they still look great. I do not use elmers glue, I used FLOOR polyurethane from lowes for the glue, then after it dried, rolled on 2 more coats. very easy to do

Wow! Yes. It does look gorgeous. What's it like now?

Hello mate just wondering after more time what are your thoughts on the b15 batch is it one of your favourites

Hint. Stop talking while shaking can. Hard to hear. Other videos show good texture. Raptor is better, but costs twice as much, so bends on budget

The switch at 3:00 is definitely not stock, someone added that for a under hood light, thanks for the video, I was trying to find out where the firewall ground connected.

What year raptor grill is ths

Meguiars hot shine foam when I detail cars on the outside it’s a great product

Shake them cans!

You could polish those scratches out with mother’s mag polish and microfiber.

Nothing is as good as wolfman polish and fit and finish, and I’ve had probably 20 different high end razors. Now I just buy Wolfman razors to be perfectly honest.

Did that make any changes in the starting problem you were having? Thanks for the video

Nice input on the razor! Just wondering, did you reach out to Paradigm regarding the scratch on the razor? If so, what came of it?

Sweet I'm glad I just don't go by the reviews I see I actually have to watch about 5 to 10 reviews before I buy something for myself that I think will be a good product

Raptor wins, hands-down in this demonstration

My God this looks hard. And just to change out a headlight! Guess this is something I am going to have to do every few years. I’ll do it manana….

better to do it from underneath . only have to remove a few screws

How you put the letters The screws that came with it are too short

underrated channel David! I'd love to chat with you btw. where can I message you?

Excellent video.

？？？🤔

David, my first view of your channel. I ordered the DB recently and it will be out in about 3-4 months. You mentioned the WR2 1.55. Do you find that plate to be very aggressive and uncomfortable? I am trying to decide between the .95 and the 1.55.

This guy shakes a can for 3 minutes before doing anything at all. Fast forward to 3 minutes

Good advice...looks quite time consuming though?

Thanks for the review!

And yeah you gone eventually polish that copper

The knot needs more density it's not ad dense and high lofted at least it doesn't seem to be that dense

I use the 2K shutz gun sprayed U-POL.. Comes in screw on container that you mix in hardener..Need mask, face covering , paint suit but Raptor is a hard , hard finish , like POR-15 .. Going to do it once and the best i can do..Just sayin..

Great video David, Diamondback is shining:) Greetings from Turkey.

Thank you for showing your Rocnel. I started wetshaving many many years ago using Straight razors, and it's only been a couple of years since i tried DE safety razors, and so far i like using them. I have a Muhle R41 Grande Stainless Steel, and i've had others, but they were too mild for me. After scouring the internel and YT for efficient razors, i've decided to get a Rocnel, so i've pre-ordered a Rocnel Sailor 2024, and expect to get it some time in June. 😃

Jesus christ that pause brother.

This video isn't even valid because of you got the wrong kind of spray herculiner percolator

There are two different kinds of herculiner spray in the cans, look at the white label where your left thumb is in this video. There is another can that has a black label and is very textured

Nice Wolfman. I have that same handle on mine.

Can you give a updated on the 10th gen 👌🏼

My one and only razor is the Karve Overlander - aluminum. I absolutely love it. Great shave 🪒 brother.

glad to see your back posting; its been awhile

What the hell was that 😂

You sprayed herculiner too close

So Raptor liner for sure. I need to touch up a few spots in the bed of my truck. Also where is that Rv park your at? Looks really familiar.

You need to torque those plugs or they will fly back out

Thought it was the same front end as the expedition but the expedition it a little wider unfortunately 😢

Wetting the frame as you go with some Windex would have made it easier to work the rubber over the lip, it was good to see the frame out of the vehicle though 👍

Of all the diy videos...this should be my fix. I refuse to spend hundreds more to fix mine.

Have you ever attempted this on a concrete slab? Great informative video by the way. Not many videos on these types of projects and you sharing this is appreciated!

Nice second video on the cables!

Great points. I’m a huge fan of PAA soaps and splashes. Both rabid banana and clown fruit are two of my favorites so I can only imagine how’s good that mashup must be. I have said before, PAA makes shaving fun. They’re masters at scenting too. I honestly don’t know how they do it sometimes. Their CK base is pretty much my go to base for face shaves. For my head shaves I’ve honestly been preferring Stirling soaps, using mainly their Sheep (mutton tallow) soap in the winter which my freshly shaved head seems to love 👍🏻

Good raw video, thanks helped a lot.

Raptor liner is undisputedly the best DIY kit out there everything else is gummy trash.Raptor liner has established itself as the new standard it even compares to linex which is something like 600-700$+.It does have strong durability uv protection and good texture just be sure to prep your bed like sand and prime for hardener its all in the instructions.

Link doesn't work.