3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
Пікірлер
@creed55 4 күн бұрын
Just came across this vid accidentally. That is badass. I as well do not like that flimsy plastic piece in the back and i would love to have this body mod. Great job.
@camaroboy383 4 күн бұрын
@@creed55 I appreciate you taking the time to check it out.. and thank you for the compliment.. the front air dam I designed complemented the tail pan nicely IMHO.. The biggest issue with the tail pan was the struts that hold the lower section of quarter panel.. a good hit and they snap off the lower sections.. the front air dams proved to be quite stout though.. 👍
@creed55 4 күн бұрын
@@camaroboy383 I noticed you made a small batch of these front and rear pans and sold them on ebay. The vid was 3 years old and im sure life has been busy. It seems i got back into RC's a bit late and have missed all these great products that folks are making. Ill keep an eye out on your ebay in case you even decide to produce any more. Great job on the prints and stay healthy brother. :)
@djswift8790 Ай бұрын
Super late but want 1 did you ever get things up & going again
@justin83-- Ай бұрын
this is perfect, i would love to purchase one from you. are they for sale?
@Cereal_Killr Ай бұрын
Id be willing to pay for that stl. interested?
@spenn2007 4 ай бұрын
Hold up, that is the spot in Connecticut that Built by Bob Rc Bashes and films at. It appears you're the OG of this spot LOL.
@camaroboy383 4 ай бұрын
@@spenn2007 you are correct..😎.. falcon Field in CT.. 👍.. definitely been going there a very long time.. appreciate you checking it out.. ✌️
@Boogie_the_cat 5 ай бұрын
Nice video. I'm replacing diff and input with GP5 and the Horizon Hobby how-to video has camerawork that would make Bigfoot videos blush. You can't see a damn thing in Horizon's video, pardon my French. Horizon gets an A for effort, Traxxas aint gonna release a video walking you thru how to customize your ride, but the execution is abysmal. Your video actually helped, and i could see enough of the car, and your descriptions of what you were doing. Please note: I'm not slamming your footage. It's gotta be a b*tch and a half to wrench on things with a camera in the way. Very helpful video. Thanks a million. With a few more steps, I'll be running 4 same-sized GRPs on my Felony, and no paying out the ass for rear Hoons that last 2 battery packs.
@camaroboy383 5 ай бұрын
@@Boogie_the_cat I'm glad the video was useful for you.. i always feel i talk to much during the video's, but the info can be extremely helpful.. looking back on this type of footage, i think an above camera angle would have been much better.. i appreciate you taking the time to watch and comment... 🙏 Are you going to use the kraton hubs and stubs to correct the rear offset?
@hellcat64 5 ай бұрын
i have a mono 4k works
@TheAngel07unicorn 5 ай бұрын
Is this project going to be finished? Very keen!
@camaroboy383 5 ай бұрын
Unfortunately, no.. that raminator was converted to electric, and he sold the engine.. so the project was halted.. i still have the casting's, but no engine to mock them to... There were also significant differences in the engine mounts, so those would need to be fabricated as well.. unfortunately this video was as far as it ever went.. sorry to disappoint.. 🙏
@dimitriossalvago8179 6 ай бұрын
Does anyone know if they offer .070 head gasket? I'm in the US. And if anyone has a part number for carbon reed valves. Thanks.
@camaroboy383 6 ай бұрын
The engine is a simple cag 49.. I would Look all over the place for a cag 49 head gasket at your desired thickness.. there are far more options if you word it that way.. these were and are commonly used in pocket bike's..
@dimitriossalvago8179 6 ай бұрын
Very impressive video. Rather than spend over a grand on an engine. Love how you improved the stock engine woth your own hands. Going to attempt myself. Thank you.
@SerialDesignationTOM 6 ай бұрын
I am going to say that suits the Arrma felony much better than the original did. I didn't like the original because of the gaping holes, Polo RC Creations did make lights for it, but I would rather have your custom-made Camaro for the arrma felony if I had one, I have really bad impulsiveness when saving my money, I have been trying to save up, and I have got £57.10 saved up but I might try to save up for the arrma felony. So I can get that bumper, but it's too bad for me because I live in the UK and not the US and my dad doesn't trust the shipping containers, so I might end up losing it at sea, so yeah, by the way, that bumper looks sick as hell.
@FPVRCs 7 ай бұрын
Where did you buy the CNC machine?
@camaroboy383 7 ай бұрын
I built it from scratch, it's a sieg x2 mini mill that I converted to CNC.. harbor freight and grizzly have the same mini mills.. This was before any decent machines hit the market that were full CNC.. there are plenty of machines out there now for around the 2k mark that are decent .👍
@Ericapires12 7 ай бұрын
Nice
@charlesmartin2339 7 ай бұрын
Did you do motor also in tx my 3s don’t run long in summer
@camaroboy383 7 ай бұрын
No sir, I try to lean away from motor fans if at all possible in a basher.. it just makes more broken fans to replace.. they take an absolute beating when coming down from the big jumps.. You can definitely cool the motor, but you should use a larger fan.. either 30mm or 40mm.. if you are going to do it you may as well get the most you can out of it.. 👍
@cbaaaa3667 8 ай бұрын
Waow!!! Amazing work 👏🏻👏🏻👏🏻
@camaroboy383 8 ай бұрын
Thank you, much appreciated..
@snakes301271 8 ай бұрын
its very Death Race💪
@Zental_7 9 ай бұрын
Hey Alden, you still making these by any chance??
@camaroboy383 9 ай бұрын
Hey Chad, definitely appreciate you checking my stuff out, and nice chatting with you today.. 🙏
@Zental_7 9 ай бұрын
Like wise bro n thanks for making the great content! 😊
@timothyallen6207 10 ай бұрын
Is there an STL file available for this??
@camaroboy383 10 ай бұрын
Yes, all tail pan and front air dam files are over on cgtrader.com.. 👍
@timothyallen6207 10 ай бұрын
@@camaroboy383 I found the file. Just bought this Felony..first thing I noticed was the "unfinished" back end.. seems odd they didn't clean it up better. Looked at a few files, your's looks more realistic. Good job!!
@camaroboy383 10 ай бұрын
@@timothyallen6207 Thank you, appreciate that, and I appreciate the support as well.. 🙏
@John-np2bf 10 ай бұрын
Wow! Nice. The way it should have been...
@camaroboy383 10 ай бұрын
Thank you.. much appreciated.. 👍
@SASQUATCH205 10 ай бұрын
Why are you chopping the throttle sooooo much??? That may be the reason it overheats so fast.
@camaroboy383 10 ай бұрын
Lack of rear diff fluid viscosity is the reason for the throttle blips... Without the blips it hooks up on the loaded tire and breaks loose on the unloaded tire.. 👍
@SASQUATCH205 10 ай бұрын
This is why I installed the hand brake off the Infraction. No brakes in thermal shutdown.
@Kittzz 11 ай бұрын
For those that don't have a CNC - Just get 2 X T-Nuts and bolt the SSR to the Aluminum extrusion inside the case. This will keep the SSR substantially cooler and much more reliable.
@jonnyrc339 Жыл бұрын
And that was supposed to say custom work. Not customer.
@jonnyrc339 Жыл бұрын
Dude. What the F. You do customer to your car like nothing I’ve ever seen with your crazy machinist skills. I chatted with you in the past bout your rear bumper. If you ever get bored of it, please let me buy your bumper and grille from you. You have the only Felony I’m jealous of.
@simongowan9845 Жыл бұрын
Port it
@RabbitsFastRc Жыл бұрын
how can i order one or a few of these
@curbasswilliams Жыл бұрын
I would love to see this done with the firebird tailligjts
@69Busa08Nova Жыл бұрын
Cool vid. Curious where you got those Allens. I saw a traxxas set at local hobby shop that came with a 1.5, 2.0, and 2.5 mm along with 3-4 nut driver adapters and a handle for $80 lol.
@camaroboy383 Жыл бұрын
The driver tips in the video are mip, pricey, but well worth it.. they are machine ground so they are perfect in size.. they will be the last ones you ever buy if you don't physically snap them.. worth the loot for sure.. I'm not familiar with the Traxxas one's, so can't say how they are.. Appreciate you stopping in to check out the video..👍
@69Busa08Nova Жыл бұрын
@@camaroboy383 thanks man!! I don’t mind investing the cabbage as long as it’s high quality. Keep having fun!
@rogerboyce5544 Жыл бұрын
Thx for this 1 MIne decided to see how hot it could get last night. Found your vid and have checked the SSR and yup hanging off exactly the same but you could tell it was burnt out by the smell Lol you saved me a lot of time hassle and worry Thank You. Have ordered an SSR the same as you have used dont have the ability to make a heat sink the same as yours but ill get hold of some aluminium plate at some point once i have it up and running again. Once again Thank You :)
@jonnyrc339 Жыл бұрын
Okay. I gotta have one for my felony. How do I find your eBay store? 15:01
@camaroboy383 Жыл бұрын
Appreciate you stopping in to check it out.. do you have access to a 3d printer? I have not sold these in a very long time.. I stopped production to gear up for vacuum forming the parts.. life proceeded to get in the way of the project reaching its end goal unfortunately..
@jonnyrc339 Жыл бұрын
@@camaroboy383 I don’t have a 3d printer. I checked out your video and was floored by how cool that rear end piece is. Obviously I’m years behind. That’s a bummer. I 100% would have ordered one. I just got my Felony a couple months ago. Thanks for your response. I’m always a day late.😂
@camaroboy383 Жыл бұрын
@@jonnyrc339 gotcha, the reason I asked if you had a printer is because the files are still available over on cgtrader.com The main reason is stopped production to vacuum form them was to increase durability.. 3d printed stuff is great, but being rigid plastic it can and will break in a crash.. not a big problem for those with printers that can just print another.. Vac formed polycarbonate was definitely the answer, i just couldn't make it happen with life getting in the way..
@fonqstarr3636 3 ай бұрын
I need a 3d printer. This is awesome work. Thank you for at least making it available to print
@marshallellis6222 Жыл бұрын
You have absolutely saved my sanity. My photon has been doing this for the last few days. I honestly can’t thank you enough
@troyhooper6896 Жыл бұрын
You ever end up making kits to buy , i really like this .
@jgrc73 Жыл бұрын
Hoping you come back with more wrenching videos!
@camaroboy383 Жыл бұрын
I very much appreciate you buddy...🙏.. I hope to be able to come back to it as well.. 👍
@jgrc73 Жыл бұрын
Extremely helpful thank you
@this.is.virginia Жыл бұрын
Looks so good !!! 🔥 awesome to see this thing backflip 😮🤩
@camaroboy383 Жыл бұрын
They sound crazy when they hit the ground..😱.. but one heck of a good time..😎
@this.is.virginia Жыл бұрын
At some point I’m gonna need one of those! 😁🔥🔥🔥
@camaroboy383 Жыл бұрын
😂😂😂.. yeah they are a blast! But I love me some crawling as well..😎Thanks for stopping by and checking it out.. ✌️
@aidendavis3086 Жыл бұрын
Do you think cutting out the front grille and putting wire mesh in would be just as effective?
@resdawgs Жыл бұрын
😮
@dr45678 Жыл бұрын
Hi. I found this video recently and want to say Thank you! for it. I have a question or two when choosing the replacement ssr. On the original it says: DC-12:40A 220VDC 3V~32VDC I found an ssr like this: DC to DC Input 3-32VDC To Output 5-240VDC 100A Single Phase. Is this possible to use? Is it dependant of the voltage of the power outlet? In my country we have AC 220V. The printer worked with the original one just fine for three years. I have no clue about the values and voltages... I understood it is needed to be dc-dc and higher amps. But for the rest I m just blank. I ve already ordered a mosfet module - I hope I will use some instructions on how to connect that I found also here but wanted to have an alternative with the ssr. Whichever comes first... If you have an advice - Thank you again!
@camaroboy383 Жыл бұрын
Thanks for checking out the video and stopping in to leave a comment..👍 The supplied voltage to the printer has no affect on which ssr to use .. the determining factor is the output of the power supply, which In these cases they are DC to DC... so the one you found will work..
@dr45678 Жыл бұрын
@@camaroboy383 yay! I was hoping for this. I really miss playing in the 3d printed reality.
@BigChuck_1 Жыл бұрын
You still Making Videos??
@camaroboy383 Жыл бұрын
Chuck! How the hell are ya buddy?.. hope all is well with you and family...🙏 Man, I've been away from the KZbin thing for a while now.. so much going on with life.. been restoring my father's truck as a surprise for him, been at it for 5 months now , frame up resto type deal.. Hope to upload a video of all the pics and the unveiling.. been alot of work man..
@Acornejo02 Жыл бұрын
Are you still selling the brackets ??
@camaroboy383 Жыл бұрын
I am not.. my design was stolen and now they are being manufactured in china far cheaper... Keep in mind, the material, and finish is much worse than mine were.. They can still be found on ebay, even with the pictures they stole from me.. The design is solid.. just be very careful with the threads.. The material is like butter..
@Acornejo02 Жыл бұрын
@@camaroboy383 but could you make it still ? 🤫👀
@camaroboy383 Жыл бұрын
@@Acornejo02 I'm sure I could fire up the machine and whip one up.. I'm swamped right now though so it would probably be a week before I get to it.. completely up to you sir..let me know and I can get the ball rolling for you if you want..👍
@camaroboy383 Жыл бұрын
@@Acornejo02 how many would you need?
@Acornejo02 Жыл бұрын
I got a Felony, and infraction 3s and a big rock 3s I really don't know what I need so let me figure that out first but so far I could use at least 2.
@jeffreyflonury4090 Жыл бұрын
Wanted to know where I can buy one didn’t see it on eBay 🤷🏾♂️
@chrismiller1689 Жыл бұрын
Thanks man for helping me out.
@donslick8464 Жыл бұрын
That was badass. Great job!
@camaroboy383 Жыл бұрын
Thank you sir.. greatly appreciate that..🙏
@realtalkwithreese9331 Жыл бұрын
Thank you sooooo much for taking the time to shoot this video and share. There I was balls deep removing all of the wrong screws until I ran across your video lol. Thank you sir 🙏🏾!!
@camaroboy383 Жыл бұрын
Your very welcome man.. thanks for checking it out and dropping a comment...🙏... Have fun with that thing..😎
@klebersilva751 Жыл бұрын
awesome work dude!!! are you still selling this incredible kit?? I´m from Brazil, would buy them from eBay, if you have them. Congratulations bro
@mikelester5524 Жыл бұрын
Nice job bro I need those for my infraction 6s I'm out here in California
@camaroboy383 Жыл бұрын
Thanks, appreciate that..👍..
@mikelester5524 Жыл бұрын
Im all so running the 20 tooth in my in fraction 6s it gets a little hot I do want to upgrade the fans have you ran the speed pinon gear yet 27 tooth??🎮🏎️😜
@camaroboy383 Жыл бұрын
I prefer the 20t for street bashing for sure... good balance of torque and speed.. 😎 I have run the 27t, car ran about 83mph in about 400ft with a pair of cheapo zeee lipo's.. 👍 If your not speed running I'd suggest lowering the motor timing in the esc, the factory set 20+ degree's creates a lot of heat for very little real world gains.. I personally wouldn't run anymore than 15* of timing on that combo..
@mikelester5524 Жыл бұрын
@@camaroboy383 I agree I ran the 27 yesterday and hit 92 mph
@camaroboy383 Жыл бұрын
@@mikelester5524 killer..💪
@horacecormier4277 Жыл бұрын
Have you built the bell housing and will you sell it for the 71cc Rovan?
@kingling1825 Жыл бұрын
Hey Alden. Could you maybe share your design file of that heatsink? My SSR also broke down and want to not happen this again. Cheers!
@JohnPopeye Жыл бұрын
By any chance, do you know the button head screw size for the sliding motor mount? Thank you