just follow your steps and made my first one! thanks!

I have a similar looking one to the usb-c with audio one you showed. I soldered it in. I get the temporary light when plugging it into the c. When I put the battery in however it still just flashed the light for a second or two then goes out just like without the battery. Any idea what could be wrong? All of the points appear to be soldered correctly to me.

The Rb still stuck with Rt after sanding 😢

you helped me a lot. thank you very much mate!

Top xplanation of the trimui. Im looking to getting one myself, but looking at your video, i thought the display looked a bit dark and not so bright..so i was wondering, is that the max brightness?

Where can you buy an IPS screen

Great video! Looking to upgrade my SP with a IPS but not sure if it it would fit in the NES version GBA SP or if any modifications to the original shell is needed?

Question does the kit come with that one wire you need to solder or do you need to buy it separately?

For 38 dollars, just below the 41 dollar tax free customs, I had to try one. I'm really into this oddball tech, ordering a new battery is probably the only thing I need to worry about.

i'm going through the possible issues with mine, i noticed last time my game crashed the system was hot as well, so i was wondering if it was due to dust and general ventilation

Fantastic video!

@JoeBleeps can the smart pro handle any ps2 emulations well? Ive been wanting a system that can run nba street games. Curious

Is the brush flux better for gbs instead of the push kind? Also whata the best iron for moding gbas qnd such.

How long is shipping on these parts? Also is the retropixel prebuild gbc the same as the funnyplay gbc kit?

Man that screen looks good, very sharp image.

Its crazy how differnt stuff is now. Kids now got no idea. I remeber when i got the pocket after the dmg and thought it was amazing. Really cant go wrong with the 3 new ones. I found good deal on 2 q5w but kinda wish they had the bigger one to use on og hardware.

The FP looks slightly bigger. I prob should just get the Funnyplay but the tech in me wants to build one myself. Although its hard to find a doner GBC for decent price these days.

This video is awesome I followed this video and I finally fixed the bumper on my controller. Thank you

I tried to do this, but couldnt get the metal part soldered off. Ended up just moving the white little switch underneath it around a little and put the whole thing back together, and that seemes to do the trick (for now).

As a follow up ideally i would like to have the old motherboard in a new shell/housing and a ips screen

This was very helpful. Especially taking apart the potentiometers and bending the contact part. My little tip of anyone reads this; don't bother putting the screws back, because it's just going to happen again in a year and you'll have to take it apart again.😊

What a piece of junk, better to get a PS4 controller or an Xbox style controller, what a defect!

Could you post (or link in some way) directions for how someone who wanted to try soldering on a WiFi dongle permanently onto this thing could do so? I’m crazy enough to give it a shot. lol

Mine just stuck the RB the anolong stick on the right is crap. On 2 of mine they take them self up

Great video was thinking of getting a trimui brick now I think I also need the horizontal one now also 😂

Definitely gonna buy this for factor even though its the same as the trimui smart pro

What model number is the Ikea speaker. Just went on a long search and could not find an example.. thanks

for me its my right bumper the one i use the most and my cousin dropped it twice now it doesn't work at all

If you mark a file as 'hidden' on the SD card, does it still show up in the flashcart menu?

My RB Button is Dead... Does not even register in a Test screen... Can that still be a Mechanical Problem?

I got a question. Can i also remove the frame from the bottom touchscreen without removing the screen from the motherboard??

hello! im mostly new to soldering, but i have all of the parts needed currently for the GBC build i want to do. i have the OLED screen, replacement speaker (the one on my GBC is kinda trashed), and funnyplaying button led kit. i think i should be able to handle the screen, but i just wanted to ask if you had somewhat of a list of soldering equipment required for GBC mods? also, where exactly should i be soldering, on a desk, on a rubber mat, something like that? im gonna do some practicing before doing the GBC definitely, but as im kinda just heading into this myself im not fully sure where to start. the GBC is gonna be my first "big project" once im comfortable with what im doing, and i hope to end up moving onto circuit bending some toy instruments i have. but i figured i would ask just for the GBC requirements/advice, since your video is the most informative and straight-to-the-point of all the other videos ive seen. thanks!

Thank you for this video! Super helpful in my first xbox controller shell change. I ended up switching out the pause, select and share buttons as well as the pairing button, your mistakes were very informative :D looks pretty good with the clear buttons!

Me compré este control y mientras espero que llegue busque varios videos de reseñas sobre este control y tu vídeo fue el mejor explicado, muchas gracias, muy útil la información, saludos desde Tijuana México.

Holy crap! It worked! 😂 I was a little unsure when I got into the part itself, and got a small stress mark in the plastic when I first bent it. But all seems good. 30 minutes in and no more drift. Now I just need to fix the other 3 that have it.

Bought my 8 year old one for Christmas. It's the best thing ever. Sounds great coming through an amp.

Where is the image bigger in GBA games? RG34XX / RG35XXSP

turn it upside down

Hi ! Thanks for the review ! Could you help me ? ;) I have a problem with my Line Doubler (Bitfunx, which was updated without problem on the Kaico site) and my Sony Bravia screen from 2009: every time I launch it with my Nintendo 64 (PAL Eur) , after a few minutes, whatever the game (Goldeneye, Mario Tennis...), the screen starts to bug for only a few seconds (colors, but also sometimes black screen for 2 seconds followed by a return in the game). I absolutely do not have this problem when using a SCART or direct HDMI connection to this TV. Do you have a solution? I don't understand why this problem only happens for a few seconds (if there was a real compatibility issue, wouldn't the problem be constant?). Thank you in advance for your help!

Anyone else a little confused by how easy he got the top off? Mine is stiff as

Not to be too picky, but the original "phat" DS didn't have backlight. Those screens are front-lit TFT Reflective displays, just like the original GBA had. The light is a front LED style just like the original GBA SP. That's why they weren't that bright and why the colors weren't as rich as the TRUE-backlit screens on the DS Lite and future iterations. I don't need my DS screens any brighter, but I DO appreciate the much larger color depth and contrast that true-backlit LED screens give. It's a night-and-day difference in the quality of the game's graphics.

These are going to outsell the ever drives

Just did this now apart from removing the heat sync and and power supply and wa so surprised by how easy and fun it was to do. Cheers

At it for 20 minutes and i cant do it looks SO EaSy HuRrR

how is the felt holding up since it's been a few months?

Thanks for this, grabbed a replacement bumper strip off amazon for £7 (came with the screwdrivers) and used this guide to successfully dis/reassemble my pad

Kurze Frage, sind das um an den Lüfter zu kommen die 8 oder 10 Schrauben T8 oder T9? Weil 3 Bei mir gehen nicht raus mit 8er

Bought a shell and was disappointed at the quality of the top screen shell. It had a manufacturing error.

The problem with my controller is that the RB button is too sensitive, i mean, just by a little touch the RB gets clicked. Could this be the solution too? I don't trust myself to do it. Maybe the clicker broke just the tip making it annoyingly easier to click.

can you do it for my phat ds?