pilot482

Пікірлер

@DrEvil-yx4vr 3 күн бұрын

Can you tell me please the takeoff weight? My Lizard with Kingtech K65G4 and 2 Liter Fuel has 7500g

@pilot482 3 күн бұрын

It's 17.22 pounds or 7810g

@DrEvil-yx4vr 3 күн бұрын

@@pilot482 thanks 👍

@very9000 12 күн бұрын

Hello. Do you use V-Bar Neo?

@pilot482 12 күн бұрын

I use a Castle Creations 160HV ESC but it's overkill. My MD-500E uses a 120HV. I use they Futaba CGY755 gyro in all my scale Helicopters. I want to try the Demon Axion but haven't tried it yet.

@very9000 12 күн бұрын

@@pilot482 Thank you. Have you or your friends ever used V-BAR NEO to fly a helicopter like a copy?

@pilot482 12 күн бұрын

No sorry. I don't know anyone that flies Vbar.

@very9000 12 күн бұрын

@@pilot482 Thank you

@very9000 12 күн бұрын

HELLO. TELL ME WHAT KIND OF SPEED CONTROLLER YOU USE?

@brandonaynesmay352 16 күн бұрын

2 idiots using a strap. Should have dolly it over then carried it up.

@ProvectusGroup 18 күн бұрын

Very good throttle management on the final right before touchdown

@very9000 18 күн бұрын

Hello. DID YOU ALREADY BUY A READY HELICOPTER OR DID YOU ONLY BUY THE HELICOPTER FUSELAGE?

@pilot482 18 күн бұрын

It's a Roban 800 size Airwolf kit that came with the fuselage and the mechanics. Bought from MotionRC.

@very9000 18 күн бұрын

@@pilot482 THANK YOU. I UNDERSTAND THAT YOU DID NOT PUT A FUSELAGE INTO A HELICOPTER, FOR EXAMPLE, LOGO 800? IS THAT CORRECT?

@pilot482 18 күн бұрын

That is correct. The mechanics were designed to fit into this fuselage and came with the fuselage.

@very9000 18 күн бұрын

@@pilot482THANK YOU. IS IT SOMEWHERE POSSIBLE TO SEE THIS HELICOPTER FLIGHT FROM THE OUTSIDE IN A NON-FIRST PERSON VIEW?

@pilot482 17 күн бұрын

Yes. There are a few on my channel already. This is the most recent one. kzbin.info/www/bejne/l2m8d5ejrq1mj9E

@very9000 18 күн бұрын

VERY NICE ❤❤❤😎👍🔥🔥🔥

@gatorwing6231 22 күн бұрын

That sounds more like a motor escapement issue in the plane?

@pilot482 22 күн бұрын

Nope. This video was from 3 years ago when the NX10 was just released. It was a issue that Spektrum acknowledged and corrected in a month or 2 after this video. Did not have any further issues with the motors after the update.

@gatorwing6231 22 күн бұрын

@@pilot482 I am glad it worked out for you. I may purchase a NX10 today to replace my old DX8.

@pilot482 21 күн бұрын

It's definitely a good radio. I used it for 3 years. I upgraded my Spektrum to the IX14. Still have my Futaba radios and prefer them. Now the NX10 got better now that they upgraded it to 20 channels.

@mitchilito99 23 күн бұрын

I have one of these and I thought this vid was FUN. I particularly enjoyed watching the wings load and unload. It looked to me like some very competent flying. I really love my MB339.

@yumaplayingcards6345 28 күн бұрын

As someone that uses straps on a daily basis for big fridges, they didn’t squat enough initially. Zero control.

@ElijahHermanski Ай бұрын

Did you buy the helicopter and the remote separately?

@pilot482 Ай бұрын

The helicopter is a kit. All the components have to be bought separately and takes several weeks to build properly.

@ElijahHermanski Ай бұрын

Yellow And Blue Helicopter So Cool!!

@ElijahHermanski Ай бұрын

Did you get a license to fly that helicopter?

@ElijahHermanski Ай бұрын

Wow What A Awesome Helicopter!!

@aoteatarai4012 Ай бұрын

Hand trolly would of been better haha

@GheestyGhost. Ай бұрын

As a temco logistics work I can honestly say that it isn’t about the doors or the weight it’s because they weren’t raised high enough that fridge shouldn’t even be touching the steps

@GheestyGhost. Ай бұрын

Another thing is the guy at the bottom didn’t have his arms straight out and locked

@karimgobara1475 Ай бұрын

Oh this is so a sad end of this wonderful rc plane I hope you will just get one better 😮😢🛬👍

@clarencetuan5770 Ай бұрын

seems k85 has nice thrust, whats the temp and altitude of your location when test it , thanks

@pilot482 Ай бұрын

That day it was about 60 degrees F and I am about 850 feet above sea level. I think it says in one of my 2 videos with this engine.

@clarencetuan5770 Ай бұрын

@@pilot482 thank you

@thomassullivan3703 Ай бұрын

Awesome bro 👍 i did alot of the reviews in watching , about to get it in the air soon she's all set-up , i did much of covering all the complex problems, wing brackets, gyro bypass maximum throws for if needed in the settings. Even down to the phone tack glue on the C-clamp for all the wheels an stuff Going to do the throttle calibration when i get on out to get her in the air 😂 my b1 is the first batch 😂😂😂 so i had to double an triple over look everything. Im going with the KM afterburner setup. They have a afterburner there's also a afterburner set-up someone put together just for this jet but it's to ridiculous in the pricing overboard . Again nice work on the flight 👍

@harryhe2589 2 ай бұрын

Would you be able to tell me how you installed your camera?

@pilot482 2 ай бұрын

Yup. It's a Runcam 2 4K (orange one)

@harryhe2589 2 ай бұрын

How did you mount it? Like with Velcro screw it in? Etc

@pilot482 2 ай бұрын

I use foam rubber between the camera and the plane. Then I wrap velcro tight around the fuselage to hold it on. My none foam plane I can use painter tape instead of velcro.

@Jet2holidays_757 2 ай бұрын

Sink rate whoop whoop pull up

@davidmcneill3809 3 ай бұрын

What afterburners are you flying?

@pilot482 3 ай бұрын

The custom B-1 set sold by The RC Geek.

@jkepps 3 ай бұрын

Great video. Could you show what your S.Bus2 port is connected to?

@jkepps 3 ай бұрын

Never mind, I just saw your other video on the topic.

@irwinwka 3 ай бұрын

I’ve just finished watching all of your videos on the H9 MB339. Fantastic videos. I’m just finishing mine and have a few questions. What type of cameras are you using? On the ground and in the air? What type/size of batteries are you using? I see you have Skycandy lights and have a red flashing strobe on the bottom. Mine came with a white non flashing light, what did you add to get it to flash? I’m using a bec to drop voltage for the light down to 5 volts. I’ve been thinking about wiring the lights with a Jst plug to pick up power off one of my 7.4 volt flight batteries. Thanks for your help

@pilot482 3 ай бұрын

Thank you! The onboard camera is a Runcam 2 4K (orange one). The latest video from the ground is my wife's new Canon H70. I use 1 Pulse 3S 3800mah LiFe battery for the turbine and 2 Genace 2S 3500mah Lipo batteries for the RX. 1 of the Rx packs is used to power the lights and gear/brakes. As for the lights.....they are not the sky candy lights. They are lights from Unilight RC. I ordered the lights individually to fit my taste for lights. I am extremely happy with them.

@irwinwka 3 ай бұрын

@@pilot482 thanks for the quick reply. I have a 42% RV-4 that I ordered the unilight system for. Very happy with it.

@travis1190 3 ай бұрын

I do this work. It was the guy in the bottom that caused it to fall. If you notice he tripped on his own foot and it cause the fridge to go sideways. Plus his hands wasn’t even on the side of the fridge to catch it if this did happen…

@TheRealNTSBlol 3 ай бұрын

Official NTSB Report: Written by [REDACTED]: While coming in on either a low pass or a final approach, Delta Flight 37 suffered from a severe wind shear, estimated to be around 5kts, hitting on the starboard side wing. The subsequent reaction: an imbalance in air pressure over the port side aerofoil, causing the wingtip to hit the ground, then causing total structural failure in the wing and engine. Thus, the plane flipped, and ripped apart in a few locations. This is the first and only recorded hull loss of Freewing Delta Airways (ICAO: FDA, IATA: FD). Survivors: 187 Fatalities: 22 Missing Person(s): 1 Case closed as of April 25, 2024.

@UnlimitedAvationRoblox 3 ай бұрын

Great job 🎉

@Aastan 3 ай бұрын

Beautiful landing

@user-gz8zv9vs3n 3 ай бұрын

Ya boy weak ...I carried one dam fridge 3 floors with zero experience..... I was never the same 😁😁😁and I'm 140 🫣🫣🫣🫣

@unclep8488 4 ай бұрын

Everyone in comments is wrong you supposed to coffin carry something that heavy up steps smh

@keithgreen3257 4 ай бұрын

Before I fly I tell myself real people are on board, that initially makes me fly with more care.😊😊😊

@RicardoLorenzo-E-1207 4 ай бұрын

Emergency landing!

@roymills415 4 ай бұрын

Great flight! Can you post your battery and times please? Thanks. Afterburners look great. Can’t believe how much the wing flexes in flight.

@pilot482 4 ай бұрын

I have my timer set for 3 min. I use Genace 6S 5600mah batteries. The afterburner uses a separate small 2S 600mah lipo.

@roymills415 4 ай бұрын

@@pilot482 Thanks! Good to know, getting ready to maiden mine, did you have to cut relief slots in elevator like some guys? Is there enough travel in the stock set up? Thanks again, I’m planning on using control board only for flaps and retracts, no gyro…..

@pilot482 4 ай бұрын

No relief slots for me. I bypassed the stock gyro as well. Only the flaps and gear are on the board. I installed a standard cortex gyro. I maidened mine with it off. After 3 flights I realized I never turned it on to try it out. It flies great without it.

@fullycharged2268 4 ай бұрын

What camera do you use

@pilot482 4 ай бұрын

Runcam 2 4K (orange one)

@fullycharged2268 4 ай бұрын

@@pilot482 thankyou

@user-fs5ir5eh7q 4 ай бұрын

모터 제품명 ? 판매처 링크

@user-nd6ht3gp2o 4 ай бұрын

where did you get it from

@pilot482 4 ай бұрын

It's a Freewing AL37 from MotionRC. I then custom painted it.

@yf222000 4 ай бұрын

This motor has a bit of residual thrust at idle. Over 1.1 lb. Now that I saw this video, which explain why my AF L-39 has a hard time slowing down on final approach for landing. Is it a good idea to reduce the minimum RPM to maybe 54000? Thx.

@pilot482 4 ай бұрын

I don't think it would be a good idea to reduce the idle rpm. You may end up with problems accelerating if the rpm is below the set stable idle speed.

@yf222000 4 ай бұрын

@@pilot482 Thank you. :)

@51PMustang 4 ай бұрын

Hello, Very nice landing. Do you always use slats and flaps? Do you mix any elevator when using slats and flaps? Where is the CG? Thanks, Stefan

@pilot482 4 ай бұрын

Yup. I always use slats and flaps. I do have a mix for the elevators. I can't remember how much but I believe it's up Elevator when extended. I'll try to check next time I have my radio out. My CG is in the middle of book range about 172mm.

@JohnSmith-mf3dh 5 ай бұрын

It has fire in the turbines!!! 5 stars video!!! Wow a soft landing, other videos have landings that suck, even on real Bell 222A's...

@pilot482 5 ай бұрын

Thank you. It isn't Airwolf without the "Turbo" lights.

@KenricP 5 ай бұрын

Nice flight! What camera are you using ?

@pilot482 5 ай бұрын

It's a Runcam 2 4k. (The orange one)

@brianjebe7797 5 ай бұрын

Perfect. What was the failure in the gear? I got one on the bench currently Im finishing with a k85

@pilot482 5 ай бұрын

Basically it's the poor quality of the stock landing gear.

@StevesRC 5 ай бұрын

Good save. Be curious to know what failed in the retract. Mine have been flawless.

@pilot482 5 ай бұрын

The retract unit is not very precise like other retract like JP Hobby. There was a lot of binding. After cleaning, repeated cycles and lots of lubrication it seems to be functioning well now.

@JohnVHRC 5 ай бұрын

Man, thats beautiful, subbd

@pilot482 5 ай бұрын

Thanks!