Not a fan of these "T13" dudes. It's a Dummy 13 (which the design files are completely free to download and 3D print from Printables) modified for injection molding without proper credit to the original creator.
@rachaelb91646 күн бұрын
Informative video but you can kill the background music. It makes it impossible to hear what you’re saying and it’s not necessary. I’m glad to see other i3 Mega owners out there posting their mods.
@zenitram1026 күн бұрын
where can you download the software/ i can only see my mouse on the Logitech software
@TheDasFaust6 күн бұрын
I used this link to download software, support.logi.com/hc/en-us/articles/360024692034--Downloads-G13-Advanced-Gameboard Check your USB port if it isn't being picked up by the software.
@paulafaust53227 күн бұрын
Cool!
@stitchforever2023 күн бұрын
1. Like ❤
@TheDasFaust24 күн бұрын
www.thingiverse.com/thing:3247219
@hed42025 күн бұрын
I have the same issue. I tried gluing the little plastic piece but it kept breaking. Then I tried modifying it but that didn't work. Then one day I had a great idea. I'll just 3d model it and have a 3d printing service print it for me in metal but when I reopened the g13 to get the piece it was soo mangled from all the modifications that I could no longer use it as a reference. I'm looking for someone to take high quality pics of theirs and measurements with a caliper.
@TheDasFaust24 күн бұрын
Try searching Yeggi for it, the creator may have uploaded the STL, as the two I got were 3D printed from Ebay.
@TheDasFaust24 күн бұрын
www.thingiverse.com/thing:3247219
@hed42024 күн бұрын
@@TheDasFaust Nice! Thank you.
@TheDasFaust24 күн бұрын
@@hed420 You are welcome, good luck!
@TheDasFaustАй бұрын
Version 5 printed in orange pla, will reprint in blue PETG when it arrives and post it, but as of right now, any new videos/timelapses posted from the SV01 Pro is using version 5.
@TheDasFaustАй бұрын
Besides the stringing, the top portion of the trunk wasn't printed properly, ruining the whole almost 3 hour print.
@TheDasFaustАй бұрын
Back to the drawing board, I scaled up the camera riser the wrong way and was unable to mount the webcam with the tripod d-ring screw. Additionally, I need to dry the PETG and reprint the whole thing, the surface, even though this was just a "test" part was bumpy, and there was more stringing than should have been.
@paulafaust5322Ай бұрын
Cool!
@paulafaust5322Ай бұрын
Cool!
@chituboxofficial987Ай бұрын
Hi, If you need CHITUBOX Pro license, please let us know! It would be great to have more talented minds joining the resin printing world!
@TheDasFaustАй бұрын
I will let you know once my daughter has purchased my first resin printer for me. Thank you for checking out my short video and commenting, I really appreciate it.
Apparently I do not know how to spell acquired according to this short.
@laurafeher9694Ай бұрын
🧡🍊 Mango 🥭
@user-lf1be1of8fАй бұрын
Mango o nada!!❤❤❤
@paulafaust5322Ай бұрын
Cool 3D flower.... Awesome!
@sparky55432 ай бұрын
Bam!! She's good!! Now, can I borrow it?? LOL
@TheDasFaustАй бұрын
You should come out and visit one day, I know you're normally busy with the paint ball range though.
@Peanutbutterandjelly6452 ай бұрын
i mean now you have an assassin creed hand
@sparky55432 ай бұрын
Important: at 5:10 Cute pupper casually walking by in the top right corner :) We are two of a kind, I don't give up easy!! :)
@TheDasFaust2 ай бұрын
That's old lady Hayzlee
@TheDasFaust2 ай бұрын
I discovered after the fact, that the battery tray can be removed making the removal installation a lot easier, batteries range from $12.00 to $30.00 for this unit.
@sparky55432 ай бұрын
You skipped the part showing putting the gasket between the carb and engine :) You know how detailed I am :)
@TheDasFaust2 ай бұрын
It's an o-ring instead of a gasket, but I will replace it, as I have to remove the carburetor again.
@sparky55432 ай бұрын
@@TheDasFaust Again?? :( I am having some trouble with my tractor engine the last few weeks, but I will give you a call on that to get your expert opinions :)
@sparky55432 ай бұрын
Excellent camera work!! Nice close-ups!!
@electronicsandewastescrapp73842 ай бұрын
said EVERYONE who bought a bambu, actually. It's a new era. tides are turning hard on AI voices you should dump that.
@TheDasFaust2 ай бұрын
This was a flashback to 2017 after purchasing an Anet A8
@TheDasFaust2 ай бұрын
www.printables.com/model/395465-flexi-catfish
@Pup-cx1kd3 ай бұрын
Fun fact: in German dachshund means badger dog
@TheDasFaust3 ай бұрын
I just learned something new, thank you for that. :)
@user-gw2lb4ts9t3 ай бұрын
YMCA , YMCAA
@sunjornmungsungharn873 ай бұрын
Did new location have new boss and monster ?
@TheDasFaust3 ай бұрын
If I remember correctly, they do, but there are only so many, so once you go through all the bosses, they just level the bosses up and you go through each one again.
@sunjornmungsungharn873 ай бұрын
@@TheDasFaust i hate to start from 0 again
@TheDasFaust3 ай бұрын
@@sunjornmungsungharn87 You can bring people and stuff over from your previous town. You can go back and forth as well and get more stuff to bring over if you want.
@sunjornmungsungharn873 ай бұрын
About auto equip should i turn it on or off ?
@TheDasFaust3 ай бұрын
I've seen it recommended to turn it on, but it is going to boil down to personal preference, because I don't think the auto equip is that good.
@sunjornmungsungharn873 ай бұрын
@@TheDasFaust i think so. because of when i turn it on all of my villagers will equip the worse gears.
@anilsonlino70363 ай бұрын
man, please help me, im triyng use with 2206 but doesnt work good
@TheDasFaust3 ай бұрын
I haven't finished the printer yet, so I haven't loaded any firmware or anything yet.
@anilsonlino70363 ай бұрын
@@TheDasFaust I'm giving up on this card. I think I'll try some with more reviews. something like robin nano or skr 1.4
@TheDasFaust3 ай бұрын
@@anilsonlino7036 That would probably be the safest route, I haven't seen this one used on KZbin yet, so I'm going basically from scratch on this project.
@anilsonlino70363 ай бұрын
@@TheDasFaust Yes, when I thought I had managed to configure homing and put it to print for a test, it behaved in an unusual way... abrupt movements. I tried to fix it, but the available firmware version is limited... I wish you good luck
@user-_Conway1_3 ай бұрын
Looks pretty sick
@TheDasFaust3 ай бұрын
I wish these had existed 40 years ago
@Official_GunsMCC3 ай бұрын
Just
@enithmurillo51773 ай бұрын
A dónde venderán estos juguetes😢😢😢😢😢
@TheDasFaust3 ай бұрын
@@enithmurillo5177 Amazon
@pjdava3 ай бұрын
Das Faust, This made me laugh so hard, thanks for sharing!
@lobdaboss3 ай бұрын
Why nozzle size, so low quality
@TheDasFaust3 ай бұрын
0.2 layer height, and I think it has to do with the filament, trying to use up older filament so I can replace it with new.
@user-qj7is8rb8j3 ай бұрын
is it possible to take off the stick cap to replace on a more comfortable one?
@TheDasFaust3 ай бұрын
The cap no, the entire stick, yes. I suppose you could cut the cap off and replace it that way, or see if someone has designed a 3D printed stick with a more comfortable cap.
@@TheDasFaustAh okay, thanks, I have already tried to take the stick off, but I am afraid of it breaking. Any special steps to take it off?
@TheDasFaust3 ай бұрын
@@user-qj7is8rb8j Unfortunately I haven't a clue as to how to do that.
@user-qj7is8rb8j3 ай бұрын
@@TheDasFaustReckon I just try to pull on it?
@EdvinLu3 ай бұрын
IF Return of the Black Prince quest does not pop up (and all prereqs are complete), you can get it in Zuldazar, on the boat on the right when facing the port, by Nathanos Blightcaller and right next to Eitrigg, there is an envelope on the side of the boat just sitting there
@geminilius4 ай бұрын
choose the power tool battery!
@TheDasFaust4 ай бұрын
I think you're seeing the tug boat in black?
@TheDasFaust4 ай бұрын
I'm trying to find the pinout for the Geeetech GT2560 V4.0 board, when I find one I'll share it.