@@paulsworkshop4179 I thought the same thing so I tried it out and everything works fine It's too late now but As long as it works its fine
@cgalbany12 күн бұрын
Where did you get the key for the inside? I’m in the neurological rehab ward with my dad and they have a slot machine that needs fixing
@paulsworkshop417912 күн бұрын
The key can be ordered from ebay usually. If you know the brand and name of the machine, a search on eBay will usually come up with something. The switch can also be replaced , but that’s difficult with a machine that’s not really yours
@666lucky1321 күн бұрын
I'm picking up a couple of these today! One works as intended, apparently the second one will not stop so ill have to take a look at the breaking mechanism
@666lucky1321 күн бұрын
So I got to take them both apart and took a look at it and the arms that stop the wheels are not in the right location, so It doesn't grab the timing clock to release the arms. And just spinns the wheel 3:27 I also just noticed on the arm side of your machine near the top it has a spring above the arm near the top! What is that connected too? Neither of mine have that
@maggienunez9221 күн бұрын
Virgin Mary 🙏
@WeekendShedHeadАй бұрын
Hi mate , just subd, look forward to checking you vids, looks cool Cheers Rob
@paulsworkshop4179Ай бұрын
Thanks!
@humbert1010Ай бұрын
Hey man great video and helpful, any idea how to change the quarter bet ? Mine accepts quarters but always 3, can it be play with 1 quarter or 2 ?
@humbert1010Ай бұрын
Hello mine is showing a CP error when I drop the quarter in, any idea
@paulsworkshop4179Ай бұрын
That is most likely an issue with the coin sensor. Clean the mechanism where the coins go through and you should be good.
@Reda-pn5ypАй бұрын
u got it off ebay
@paulsworkshop4179Ай бұрын
From the manufacturer
@OffWhiteComicsАй бұрын
Thanks for the video. I am looking to get one of these types of machines. You seem to have a good amount. Are you a collector?
@CO84truckerАй бұрын
My high school near Cleveland OH had Acme pull stations like that.
@charlesbarton83982 ай бұрын
I just recently purchased a Pachislo slot machine called thunder explosion I don't have any problems with the machine it works fine. My question is under the reset and under the odds switch there is two counters inside a glass shield with a black switch underneath each one by any chance would you happen to know what they are as it's not written in English
@paulsworkshop41792 ай бұрын
One of them forces a Soft Reset after a Big Bonus Round. The other, causes all the Credits to be paid out at the end of a Bonus Round This might help www.pachitalk.com/forums/showthread.php?56831-What-do-these-2-switches-do
@charlesbarton8398Ай бұрын
I tried to check out that link you sent but it really didn't help me your answer was the best help I could get I will just figure out which switch sets constantly paying out instead of saving
@charlesbarton8398Ай бұрын
I will end up selling the machine I bought it because I liked it it was a good conversation piece do you have any clue what they're worth
@paulsworkshop4179Ай бұрын
@@charlesbarton8398 you don’t like it? They’re worth 100-200 tops. Really depends on your area
@TheVertigobutler2 ай бұрын
I can't get the error code Co off of my juggler slot machine. I have tried everything the web has suggested.
@paulsworkshop41792 ай бұрын
Have you cleaned the coin mechanism?
@TheVertigobutler2 ай бұрын
I have the juggler machine and I keep getting the Co error code. I have reset it, checked the hopper and it still gives it to me everytime I put a coin in
@paulsworkshop41792 ай бұрын
Have you tried cleaning the coin mechanism? Also, check all connections in the coin mechanism. There are videos and other resources that go more deeply into the coin mech. Search pachislo coin mechanism issues and you should find some helpful info.
@OldSneelock2 ай бұрын
Hi Paul. Great video. I love the format and having the ice cream break was genius. Ryan has a 3D printer but I have held off on buying one. I'm sure I would find a hundred uses for it but I'm holding out for a milling machine. 😀😎 I haven't been to a show in years. Covid then Lydia getting sick has pretty much killed road trips for me. Someday.
@hareth26692 ай бұрын
Which city is this store in please ?
@paulsworkshop41792 ай бұрын
This is in Essex County NJ.
@paulsworkshop41792 ай бұрын
Your best bet would be to check eBay.
@bhow78992 ай бұрын
Thanks Man I think you might have helped me solve my issue . Very helpful .
@paulsworkshop41792 ай бұрын
Glad it helped
@bhow78992 ай бұрын
do you know if there is a way to get another key ? also need to get skme more tokens .
@3597wolf2 ай бұрын
I would love to get my parking meter restored and mounted but I can’t seem to find anyone near me that does that.
@paulsworkshop41792 ай бұрын
You need to do all of that stuff on your own I think. Glad you liked our video.
@jefffrye63142 ай бұрын
Paul - LOVE these videos!!! I just purchased a Cyber Dragon, the payline light PCB (5 lights) is bad. The resistors burnt up, broke off, or were missing when i bought the machine. do you know if anyone sells replacement pcbs? also my LCD does not light up, the power leads are getting power so I feel like the LCD is bad, need to replace this as well... thoughts?
@paulsworkshop41792 ай бұрын
Glad you like the videos. There a couple of eBay sellers that have parts, but it’s getting difficult to find parts. Search keep4safety eBay seller.
@jefffrye63142 ай бұрын
@@paulsworkshop4179 Thank you!! i think i found the PCB! still looking for the LCD. my machine will not take a single token bet, you must bet 3 each time... is that a setting ? or maybe a defect in my machine?
@paulsworkshop41792 ай бұрын
Some of the machines do a single token bet, but most of them require 3 coins to operate.
@beck7692 ай бұрын
Today's show brought to you by Crunch `n Munch!
@JennyoftheNorth3 ай бұрын
What an honorable project! You two men worked so well together. She looks absolutely beautiful!
@paulsworkshop41793 ай бұрын
Thank you so much!
@chrisvahey2 ай бұрын
@@paulsworkshop4179 Hi Paul Great Job, What color blue is the valspar season pro? Thanks
@paulsworkshop41792 ай бұрын
@@chrisvahey I wish I could remember.
@carsonmarin62063 ай бұрын
I have the same machine but under the power switch there is no lock cylinder. Just a hole and I can see inside the power supply. What should I do
@carsonmarin62063 ай бұрын
If someone added a toggle switch would it be located anywhere else besides where the key would go? I just have a blank hole but the machine works fine
@paulsworkshop41793 ай бұрын
You need to install a toggle or push button in its place.
@Rebel96683 ай бұрын
I figure if it needs it I can paint the underside with some krylon. I used turtle wax on the bare metal as well, but been wondering if maybe that ceramic coating stuff they have nowadays might not be even better? I think my knives/gouges were a brand called yellow hammer or something like that. Something I am curious about, would it be better to use green wood on it or seasoned wood?
@paulsworkshop41793 ай бұрын
I believe you should use seasoned wood.
@Rebel96683 ай бұрын
I got one of these as a Christmas gift in 2022 and for various reasons just got around to unboxing it last week after I built a cart for it. Also got a set of knives/gouges and picked up a bowl chuck? for it. Still need to get a face shield and a drill chuck before I try firing it up though. My garage is detatched and unheated but I have a torpedo heater that'll make ya wanna work with the door open in about 10 minutes, lol.
@357magdad3 ай бұрын
Young Magdad always wanted a rock tumbler for Christmas! Looks like you had fun at Jacktown!
@paulsworkshop41793 ай бұрын
Yes! Definitely worth the trip.
@ScoutCrafter3 ай бұрын
Paul- You did really good at the show! That rock tumbler was a fantastic buy! I’m so glad you made the show and hope you can make more shows! BTW- The Crunch and Munch is mildly addictive. 😂😂😂👍
@paulsworkshop41793 ай бұрын
I wonder…do you have a rock tumbler?
@OldSneelock2 ай бұрын
@@paulsworkshop4179 Yes I do have one. It is a fun tool and it works perfectly. I have polished rocks and made sea glass with it. The tumbler is rather quiet for what it does but I would suggest running it in the garage rather than a basement. The noise isn't loud but it can get annoying. Getting the extra grit for $5 is great. When you run the tumbler conserve the grit by keeping it in separate jars so it can be reused. I prefer relish jars but if you can find some small Tupperware type and not let the wife know you have them they work better. 😀😎
@BYGT3 ай бұрын
I can’t watch. I know it’s a statute, but the way he grabs Her head!!!
@paulsworkshop41793 ай бұрын
Sorry! Trust me, she made it through safely and is quite happy to watch over our home.
@alaemeram3 ай бұрын
Do restore Mary statue? I have one that’s about 3 feet tall and would like to have it restored. Can you please let me know
@paulsworkshop41793 ай бұрын
We don’t do any work professionally, but it is something you can do yourself.
@WayneBamford-dq9jt3 ай бұрын
Hi do you have a power cable for king pullsar machine or do you no wer I can buy 1 thabks
@paulsworkshop41793 ай бұрын
Do you need a transformer too, or just a power cord? You can use a computer power cord that are available at Best Buy. If you need a transformer shop on eBay.
@ScoutCrafter3 ай бұрын
I found it! Outstanding job!!! Great grind! 😃👍
@paulsworkshop41793 ай бұрын
I was worried about the grind!
@CanuckRuby3 ай бұрын
Beautiful!
@paulsworkshop41793 ай бұрын
Thanks!
@hayleetaylor33483 ай бұрын
This looks great! I just picked up one of these in olive green from a nice old lady on facebook marketplace. Thank you for showing the plastic rotary plate removal - I couldn’t find the little hole at first 😂
@paulsworkshop41793 ай бұрын
The green phones are nice. Good score!
@Resto-Rob3 ай бұрын
Awesome! Loved the video. Can you get me a drink or something? - 😂
@paulsworkshop41793 ай бұрын
He’s a real comedian. 😂
@rawbacon4 ай бұрын
Fun project, great job guys!
@FunnyHaHa4204 ай бұрын
Or just use a butterknife.
@paulsworkshop41794 ай бұрын
?
@ToolsandTime4 ай бұрын
Wow nice work guys! That chop saw is a beast and sounds like you guys got a smokin hot deal on it.
@paulsworkshop41794 ай бұрын
We did! Overkill for this job, but great for angle!
@bobuncle69624 ай бұрын
Excellent job.
@toolscarriagesmodellbauand72464 ай бұрын
Its looking good. Congratulations.
@rollerbald4 ай бұрын
Looks good to me! I love how you used the Handy Andy tools to make the screwdriver. You will have fun with the little lathe. That chop saw is pretty awesome. Best regards, Bill.
@paulsworkshop41794 ай бұрын
Thanks! I love the Handy Andy tools.
@357magdad4 ай бұрын
Great father and son project!
@paulsworkshop41794 ай бұрын
It really was! We had fun.
@bigvicsworkshop4 ай бұрын
Nice Job! I like the handy andy tools! Perfect father and son project! Gooder than good stuff Mr. Paul!!
@paulsworkshop41794 ай бұрын
Thanks!
@Bigfoot140004 ай бұрын
Excellent start, thanks for posting.
@Ragingnsweet4 ай бұрын
I still get the HE error code. Did I miss something?
@paulsworkshop41794 ай бұрын
If your hopper is full and still ejecting coins, it is most likely something to do with the sensor.
@Ragingnsweet4 ай бұрын
@@paulsworkshop4179 sensor on the Hopper itself?
@paulsworkshop41794 ай бұрын
@@Ragingnsweet yes
@ScoutCrafter5 ай бұрын
Great stuff Paul, except for that Mini Mag. Those flashlights make the batteries swell and corrode everytime. They use a bulb that’s rated fora couple hours! I loath those flashlights! On the other hand both of the other flashlights are great! 😂👍
@paulsworkshop41795 ай бұрын
It’s been a while since I’ve messed with one of those mini maglites. As soon as I realized that cover was stuck, it all came back to me. 😂
@OldSneelock5 ай бұрын
I have 3 of the older ones and one of the older actual BD 150. Not too bad for light work. I bought a cheap knockoff. Not BD at all and I used it for 3 or 4 years. The wood deck got wet and it crumbled. The original BD that my Dad gave me is still going strong. Except for the wood. The particle board was bad when Dad got it in trade for some work.. It has a die cast frame. Stronger than the steel tube and sheet metal ones.
@paulsworkshop41795 ай бұрын
The older ones were much better.
@OldSneelock5 ай бұрын
I have had Mini Mag that the batteries leaked. I ended up tossing it. The aluminum shell just decomposed and filled the inside with smut. Not a bad deal on the drivers. I have a couple sets. Neither one has a hollow shank. That would be handy sometimes. Nice pick with the fake BS light. Still a handy design for letting you clip in to your belt or stand it up. I store flashlights empty except for some of the HF lights that look like blue bars of soap. They were free with a purchase so I have many of them. Takes too long to put a battery in them so I just change the AA batteries when they start going dim. Good Will is a fun trip. Glad you did so well. 😁😎
@bobuncle69625 ай бұрын
Goodwill flashlights always need to be tested before you leave the store! Too bad the green one is not BSA
@paulsworkshop41795 ай бұрын
Live and learn! I did it more the fun of making a video.
@markowens25775 ай бұрын
U give a.good AND honest review/research. It's nice to see. Instead of saying just trying to sell the stuff. 😎🔋
@bobsoft5 ай бұрын
OMG the low voices to the blasting music when drilling as I am listening with ear buds!