That's annoying. I feel sorry for you. I really wanted to see it run with the wide wheel base.
@danielbowen293515 сағат бұрын
@@RCBirds I have more parts on the way and one ragtag part I can use till they come in.. I just want to go fast!
@JoevsRcКүн бұрын
Sorry for your bad luck today
@poorboysrcКүн бұрын
You're on the board! Hope the damage wasn't too bad!
@danielbowen2935Күн бұрын
@@poorboysrc trashed gears.. then popping the esc trying to set the mesh🤦♂️
@TeamJunkYardDog4 күн бұрын
Faster than my 24! This car is tricky.
@danielbowen29354 күн бұрын
@@TeamJunkYardDog i agree! Everyone has a different take on this it is awesome to see everyone’s approach to a solution.😎🤙
@JoevsRc4 күн бұрын
Hope there is not too much damage.
@danielbowen29354 күн бұрын
@@JoevsRc all that seems to be happening is I lose my mesh.. my motor keeps moving🤷
@JoevsRc4 күн бұрын
@danielbowen2935 are you using the aluminum cross brace that came with the kit? It kind locks the screws in better
@danielbowen29354 күн бұрын
@@JoevsRc I will see if I can cram that in there too!😜 the thread length is lacking with the bolts I am currently using 🤷 I will try some longer ones and the brace too! Thanks 🙏
@jack-o-trades4 күн бұрын
Thanks for joining the challenge! The gear mesh doesn’t sound right. It sounds like either your mesh is too tight or you’re running a 48 dp pinion with the mod 0.6 tamiya gears. What pinion are you running?
@danielbowen29354 күн бұрын
I am sure I am using the wrong pinion. I have a 40t on a steel main gear. I think it is 48p. Any recommendations on a pinion?
@jack-o-trades4 күн бұрын
@@danielbowen2935 Anything that is mod 0.6. I would grab 23T-26T. You can find these on Amazon.
@danielbowen29354 күн бұрын
@@jack-o-trades I will get some thanks!
@RCBirds16 күн бұрын
Very cool. Have fun with this event and best wishes for your results.
@danielbowen293516 күн бұрын
@@RCBirds thanks I am going to need it! There is tough competition!
@JoevsRc19 күн бұрын
Sweet! See you at the finish line. Good luck . Just subbed
@danielbowen293516 күн бұрын
@@JoevsRc I hope I get there!🥵fried a gear.. waiting on parts🥶🔜 soon for the parts I hope!🤞
@bradkalman235319 күн бұрын
Thanks for the sub.
@danielbowen293516 күн бұрын
@@bradkalman2353 hope to see more!
@leaningtoofarwillmakeyoufa724420 күн бұрын
Did you have to cut the body to make the widemaxx kit work?
@FastFreddyRC25 күн бұрын
Very cool! Best of luck! Love the kit!
@danielbowen293524 күн бұрын
@@FastFreddyRC thanks man! More to come!
@outoftouch9928 күн бұрын
Nice i just got mine its sick
@danielbowen293528 күн бұрын
@@outoftouch99 any plans to upgrade? I am going dualy on the rear🤓
@outoftouch9928 күн бұрын
@@danielbowen2935 na i like is as a crawler ,snow runner vibes
@danielbowen293528 күн бұрын
@@outoftouch99 I like that! That is not something that I would have thought of! Awesome keep me in the loop I wanna see it!
@Killerisgoodw.d.sАй бұрын
The punch bug
@danielbowen293529 күн бұрын
@@Killerisgoodw.d.s I will look into this-🤯🤙😎
@JuhKohTeeАй бұрын
Sick! What is your first? & What is your favorite to bust out with the homies?
@danielbowen2935Ай бұрын
@@JuhKohTee so here is the gig.. no homies due to I am a sigma. But my first love is my hcg 4x4 slash.. kind of difficult to pick they all have there “bits” I like about them just like the ladies! 😈
@JuhKohTeeАй бұрын
@@danielbowen2935 LoL you made my day, love the 4x4 slash, I put a black mamba in mine years ago and haven't done anything else really
@danielbowen293529 күн бұрын
@@JuhKohTee I have two builds that will likely end up with a 1900kv hobbywing and matched esc😎🤓
@kylehegemier-om2mlАй бұрын
Oh shit, a confirmed sigma right here😮
@danielbowen2935Ай бұрын
@@kylehegemier-om2ml I thought that it was strange that they just blurted it out of nowhere
@armaoutcast8sbashing268Ай бұрын
What's it doing?
@danielbowen2935Ай бұрын
@@armaoutcast8sbashing268 I think it is having esc issues. It has just sat there since i built my shelves. Must be time to put it back on the bench!
@larrytemen4789Ай бұрын
Them tires are going to blast the absolute piss out of the body under full suspension compression and don’t you dare turn the wheels under suspension compression either. It’s gonna be even worse.
@danielbowen2935Ай бұрын
@@larrytemen4789 yes absolutely! Likely a shelf queen.. or not? Want me to test it?!😈
@User-RClifeАй бұрын
Hey its me two wheels 😂
@danielbowen2935Ай бұрын
@@User-RClife hey there! Glad you stopped in!
@User-RClifeАй бұрын
Sike cars🎉
@danielbowen2935Ай бұрын
@@User-RClife thanks! More to follow!
@User-RClifeАй бұрын
It's me from the neighborhood
@User-RClifeАй бұрын
Two wheels
@Contentdeleted-v2oАй бұрын
Hey this is the kid from the neborhood nice rc car 😮
@danielbowen2935Ай бұрын
@@Contentdeleted-v2o hey man thanks for swinging by!
@HFR_HardFastRider_RacingАй бұрын
Yoo I got that same two body’s and I got the same color on my xo-1 and the arrma felony!😅
@danielbowen2935Ай бұрын
@@HFR_HardFastRider_Racing sweet ! You have anything noteworthy under the hoods?
@gonzodetroitifyАй бұрын
Hey Daniel I think I’ve seen Kevin Talbot leave a piece of magnets 🧲 on his ugger dugger drive bit😁😏 when he’s drilling the rc cars you’ll see the small square chunk of magnet spinning around
@danielbowen2935Ай бұрын
Thanks mate! I will give it a go for next time!
@davidblose45132 ай бұрын
hellz yeah, you gonna build up to attempt worlds fastest RC Car? I miss my RC car days but it just got so expensive after a while. I do miss my FPV drones and my 1/5 scale HPI Baja
@danielbowen29352 ай бұрын
I am going to build something fast really fast. I want to do a fpv car at some point also
@Rickyd864 ай бұрын
I miss my little go buggy. Apparently the tweakers needed it more than I did