Thank you. I'm glad you found it informative.

Actually, we don't do anything except make sure that anything with competing roots is not growing too close. The root system of this thing is gigantic and it's planted in loose soil. If you look at the base, the circumference of the original is quite large, larger than the parts that have regrown into what you see with the flowers.

@@bentsprockettech Thank you!

If you are familiar with downloading the flight logs from your flight controller, I may be able to help.

It has to be the gap between the body and the top. LOL Physics. It's vibrating at just the right frequency.

She's available as a kit at www.tindie.com/products/bentsprockettech/mj-the-stem-robot/.

It does. We have a lot of bees in the area and when they are done doing their work, just about every flower on there bears fruit. It's amazing!

Thank you.

Very cool. Enjoy.

Okay, no you have me wondering what happened. I guess we're about to see.

There are many ways to dampen vibrations. The first thing to do is isolat where the vibrations are coming from. Unfortunately, with a folding frame, alot of the vibration can come from the hinges, especially if the spring loaded locking pins have any play. I use dampers similar to the ones used in FPV quads to mount the flight controller to the frame. Depending on which flight controller you are using, you may have to use them. The firmness of the damper also is dictated by the frequency of the vibration you are trying to tamp down. DM me at [email protected] and I'll try to give you some help.

Thank you for your reply. I found the cause and solved it. The causes are as follows: 1. The screws on the hinge were loose so I tightened them 2. Lack of understanding of ESC calibration (stick position when motor started) 3. Mismatch in MOT_SPIN_MIN setting 4. Incorrect connection between S.BUS and S.BUS2 of FUTABA receiver and flight controller Once I fixed these 4 points, the vibration disappeared.

@@Aqw56Kame That's awesome! I'm glad you were able to get it resolved and thank you for sharing with us. This may help others resolve their issues.

Thank you!

Most "drone motors" will do well underwater. Just rinse them out when you are done and blow the excess water out with compressed air. Be careful of any bearings made of steel as they will corrode. A little WD-40 will help with the corrosion, but be careful because it can also cause grease in the bearings to be removed prematurely.

The original motors used in the thruster you see in the video are no longer available, but here is a link to similar ones www.amazon.com/dp/B075DD16LK/?coliid=IN2BKV1IYJYVZ&colid=VLBS9Z6FWDNL&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it. Make sure you pair them up with suitable ESCs with the proper amperage rating.

​@@bentsprockettech Suggest a bldc motor

I might have to experiment with a few to see how we can mount them in the current housing.

You're welcome.

This one is an older Method by Body Glove, Model :1714. It's very good if you need flexibility at the shoulders. US CGA # is 160.064/4429/0. I hope that helps.

@@bentsprockettechThank you!!

I have a helicopter that someone donated. I even have spare parts for it. I'll try to get a video for it up soon. For the remote (radio) is connected to the rc receiver on board the quadrotor. QGroundControl "sees" the remote through communications with the flight controller. This is why you can set the functionality of the channels in QGC. So, effectively, you have two places to set how your channels work, at the radio and at the receiver. I hope that helps.

@@bentsprockettech anything will help even if you have to make a 2 or 3 part video that good for content each 1h long. There just very few videos out there. Which is not really helpful some seem to connect without having to do the work except the one who which to copy or follow leave their head scratching how to or where does this go. I feel like KZbinr now in days do cheap content to get cheap algorithm to benefit. Which it should be the opposite on making good content with in depth knowledge and understanding. This way people follow each step which leads to authentic subscribers. Willing to learning more, if you can do a setup of the hardware. Pitch level and parametric settings etc. I just got my Firefox to learn to fly a helicopter and would love to get a large helicopter with the px4 hardware and gimbal setup to program to fly. Again your only the few who has good content out there

Thank you. I appreciate the feedback. I will try to get some detailed videos up on the heli as time permits.

@@bentsprockettech thank you. I’ll keep my eyes out for your next videos

They start blooming when it darkens after sundown so that by dawn they are completely open. As the sun comes up they start closing again and by noon they are closed up again.

@@bentsprockettech Thank you so much! Did you see any moths pollinating them?

@@tamaracollin2681 I did not. There are very few moths in this area. We are near a canal and we tend to get more dragon flies than anything else.

This is the one your health care provider recommends after you pass a certain age. LOL

I have not been able to share the SS window itself. I usually use my second screen, maximize it there and share that screen to show something real-time. If I hear anything on that I will let you know. It doesn't seem like Google Meet can share the pop-up windows from primary windows in the share.

I've added a link in the description for you to a part similar to the one I used.

The best part is that it makes it easier to find that one page you're looking for. :)

It will get there one day. I am really amazed at how fast these things grow under ceratin conditions.

Was it charging before and stopped charging? The first thing to check is your cable. They do deteriorate over time. 1. Make sure you are charging it with a charger that can supply enough power. 2. Try using the original cable or a fast charging cable that can carry the amperage (all USB-C ables are not the same). 3. Take some canned air and blow out the USB port on the device (yes, I know someone who had lint stuck in there). Hope this helps.

@@bentsprockettech My friend bought it for me from USA 5 days ago and the device is with me since 4 days, he said he charged it from hotel wall USB charger, it was %20 when i got it then i tried everthing and charger doesnt work. It's been frozen since 2 days :(

@@bentsprockettechi bought it öne week ago first it charged then it stopped

First, try a new cable. Hotel wall charger are bad. I have had bad experiences with hotel chargers. Try a cell phone charger if you have one handy. At least 1.5A.

Normally, I'm a little nervous about the after marker batteries. This one is holding up well. Most of the videos on this channel are recorded using that same cell phone you see in this video. :) The only thing is that this kit doesn't come with the sealing tape for the back cover. Just something to keep in mind.

This one is for you. I always wear a life vest, but I've never needed it. This thing has never flipped and I've had it in rough water and even wakes from large boats. Not a guarantee of course, but that's my experience with it. It's been so good, the boss (my wife) asked me to get one for her as well. Good even with a high center, the seat has a standard bolt pattern so you can pick up a pedestal to lift you up a bit. The paddles are long, so you can actually sit up a little higher and still use them. Hope that helps.

Thank you for watching.

Thank you for asking about this. We were running at 12v with a 20a ESC. I am about to pick up an amp meter. As soon as I do we can record another video with actual numbers. This video was an attempt to record max thrust (as much as we could with the low budget hack setup). The new motors will probably be the KV950 X2830 which are 350x and would max out at 28a peak. I know that's not exactly what you were looking for, but I hope it helps.

I got it up to 22 amps at 12v. Please see the test here kzbin.info/www/bejne/moWTkKhjfaism7c.

Thank you! You guys keep me going.

Thanks! Glad you enjoy it.

Very observant of you. I am learning that the way you flick the page is important as well as trying to make gestures with the marker too close. The device has palm rejection so that when you are using it you do not inadvertently gesture. Most of what you see in the video was caused by me rushing to show you all the features. Now that I've been using it for a bit I don't see the lag the way it is in the video.

Glad it helped.

Glad you enjoyed it.

Very good to know. Thank you for the information. We may have to get another video out on this one.

You can read well with it. The only thing is that it's not directly connected to a service like the Kindle. I use it to read PDFs and ebooks and it is very clear and easy to read from. The reMarkable can open ePubs and PDFs directly.

You should be able to. The link below shows a motor that is a 340kv having a capacity of 1.5kg with 7" 6.2 pitch props. The current config of the quad puts us around 2.25kg. That should give you enough headroom. Are you trying to get more stability and stamina out of the drone? If so, that is a direction to go. If you want snappier movements you would need to increase your kv, but that also decreases your payload cap. On the servo, if you are planning to drop your payload, be careful as that can get you into some possible trouble with the authorities depending on where you are. There are extra channels in this setup so you can attach more actuators and servos as with the gymbal and use the mix on your radio or QGC to route the channels. Hope that helps. :)

Tell us about the new products. Maybe we could do some comparisons.

A close friend of mine has the Srcibe. It is also very good. He does a lot of reading. He's connected to Amazon services and it works very well for him. :) The reMarkable more closely gave me the feel of my many notebooks and pens. It was very close between the two though.

The community is growing. :)

You cared enough to leave a comment. Thank you. :)

ROFL You might get it.

☺😍🌸🌻🌺🌼