Bro, sa Jamies Gadgets sa Giguinto Bulacan. Ito ang link... s.shopee.ph/8ABvYnfenw
@Kohakunushi235 күн бұрын
Waterproof po ba to? Suitable daw to for all types eh
@morrisrc5 күн бұрын
Yea bro suitable for all types pero walang nkalagay na water proof. Open ang mga pins. Minsan try ko open ang rx kung coated sya.
@Kohakunushi234 күн бұрын
@@morrisrc also sir, if you can test this to MN82 it would be a great help since I also have this set, currently having a hard time installing it to my MN82, hope you can help me. Thanks in advance !
@morrisrc3 күн бұрын
Ok bro
@evoemperor37765 күн бұрын
There is not much to it rather than a good body for mn99 chassis😁👌
@morrisrc5 күн бұрын
Yes bro your right
@killerbee10ify7 күн бұрын
Ganda ng pajero kaso kulang sa sustansya 😅.. waiting sa upgrade series mo sa pajero sir!
@morrisrc6 күн бұрын
Hahahaha! Oo bro kulang sa sustansya
@maeldomain8 күн бұрын
Pajero is a classic beauty but this ldrc looks off. I will definitely go for the rover not just the looks but metal part that is worth the price too.
@005connect93 күн бұрын
I have both and the Pajero outperforms the rover by far.
@morrisrc3 күн бұрын
@005connect9 nice bro 👊
@giopirmisashvili55149 күн бұрын
Thank you
@morrisrc9 күн бұрын
Welcome bro
@MH4family10 күн бұрын
🎉The first review I watched from a KZbin channel
@CK4RC11 күн бұрын
Good side-by-side comparison. Nicely done.
@morrisrc10 күн бұрын
Thanks bro
@Yukanhayt-Mhenow11 күн бұрын
Milometres!!!
@JustVibinRc11 күн бұрын
Just ordered the kit pajero, exciting! 😂
@morrisrc11 күн бұрын
Nice bro
@gianlouiei.servano66312 күн бұрын
Can this esc work on not brushless motor?
@morrisrc12 күн бұрын
No bro, this is only for brushed motor.
12 күн бұрын
Thank you very much for the Review, I almost bought the 1297 thinking it would be good like the mn78.
@Paopolomololl12 күн бұрын
Liked the review. I’m getting one mostly for looks but will follow for upgrades. Thank you!
@morrisrc12 күн бұрын
Thanks bro
@carloshnunez12 күн бұрын
The mitsu looks great, you can swap a wpl c24 chassis on that one 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
@morrisrc12 күн бұрын
Yes you got it bro but we wait the chassis upgrade for mn defender. Those gearbox is best partner for portal axle. High ground clearance and clean underneath.
@carloshnunez12 күн бұрын
@@morrisrc I prefer the two speed from wpl
@jercsgn14 күн бұрын
Sold!
@morrisrc14 күн бұрын
Hahaha! 😅😁🤣
@johnalexanderayudan922915 күн бұрын
master same po sila ng dumbo na may port para sa jst plug para sa battery?
@morrisrc15 күн бұрын
Wala bro
@lokalrc606615 күн бұрын
Available ba sa shopee, pre?
@morrisrc15 күн бұрын
Meron pre pero mas mura sa lazada.
@lokalrc606615 күн бұрын
Ang galing!
@Violator-RC15 күн бұрын
Neeb for the win!
@alibz728317 күн бұрын
Stock esc lng to bro?..
@morrisrc17 күн бұрын
Yes bro
@alibz728317 күн бұрын
@@morrisrc salamat bro. Upgrade kuna mn82 sa kaibigan ko...kala ko kc ma susunog esc..
@rovor1119 күн бұрын
Hello and thank you again for the great guide. I've made the motor change. Motor is working fine and smooth but when I connect it with the wheels, the wheels are tugging. I've tried to turn the joint with wheels and it seems to helps but I'm not sure if it is as the original state. So I would like to ask you if am I correct that it is necessary to correctly set (turn correctly) the plastic (original) connection to the motor. Thank you very much in advance.
@rovor1119 күн бұрын
Hello, thanks a lot for this guide! I've made the same change (same servo) but when steering is full left/right, the car slows down and starts "tugging". I need to increase power a lot. Please, advice what is wrong. Thank you very much in advance.
@morrisrc19 күн бұрын
Change your plastic dog bones into a metal cvd. Including the metal steering cub and the wheel hub. If you still want the plastic, trim the steering cup that hit the axle.
@rovor1119 күн бұрын
@@morrisrc Thank you very much. I've tried to trim the steering cup according to your video as well but the problem is the same even with the original servo. When full turn to the left/right the car movement is tugging :-(. But I try to buy metal parts you advice.
@786esteban19 күн бұрын
with the motor upgrade, how much does it last the original battery?
@morrisrc19 күн бұрын
Mayabe around 20 to 30 mins comtinous trailing but not pressing full throttle all the time.
@adriano150121 күн бұрын
Serve no MN128?
@thecomedyhouse12323 күн бұрын
Nice 👍 is it possible to increase the signal range/ control range of mn82 ?
@morrisrc23 күн бұрын
None bro for stock electronics
@ulungprabowo27 күн бұрын
Is the buzzing noise from WPL D12 motor dissapear after using this ESC? It seems so from the video but I need a confirmation 🙏🏼
@wheelbarrow280327 күн бұрын
Can you program this ESC? I saw on the AliExpress listing that the seller mentioned "ESC is set in the middle of the range, the new control generally need to fine tune the throttle."
@morrisrc27 күн бұрын
No bro this is not programmable
@vinzpunisher4564Ай бұрын
Nice conversion on motor to gain more power or to ran smoothly?? Did you change also the ESC or your still using the original
@morrisrcАй бұрын
Still stock board bro. Now I change the motor same 370 but high rpm. 21000rpm 370 motor much better more speed, replace it just a while ago.
@killerbee10ifyАй бұрын
Sir are you still running the stock esc with the 370 motor?
@morrisrcАй бұрын
Yes bro
@killerbee10ifyАй бұрын
@@morrisrc wala naman issue so far sir?
@morrisrcАй бұрын
Wala naman bro pero bihira lang din magamit medyo nagstop muna sa rc baka by this july habang bakasyon mga bata. Pero bumili narin ako ng 2100rpm na 370 motor masubukan kung ok ba un.
@killerbee10ifyАй бұрын
@@morrisrckaka lagay ko lang ng 370 motor ko sir, may increase nga sa torque compared sa stock 👌 goods din ang stock esc sir hehehe..
@morrisrcАй бұрын
Yes bro. Kahapon pinalitan ko ng 370 motor na 21000rpm ung blue cap, mas ok sya mas bumilis.
@RC_CARS0Ай бұрын
Can you make vedio about (ysido TX YS7) from Ali express/please
@vonryanmacaraeg4080Ай бұрын
can i do this upgrade in wpll c24 wiithoutu changing electronics? or changing metal axle and rods in to metal?
@morrisrcАй бұрын
No bro they are not the same gearbox with wpl c24.
@ka4172Ай бұрын
WP V1
@morrisrcАй бұрын
Yes, wpl version1
@ultimategoals5562Ай бұрын
Try adding some weight or maybe remove the slanted shock from back it will get better 😅
@VictoRize21Ай бұрын
What to do if the gyro doesn't work, the gyro just flashes red
@alibz7283Ай бұрын
Sir bumili ako 2speed gear box..para mn99 ko..nag tataka ako..ung ikot ng gulong ko sa harap pa abanti sa likod nman pa atras..bakit kaya
@morrisrcАй бұрын
Anong 2speed metal o ung plastic version?
@vinzpunisher4564Ай бұрын
This video helps me a lot since im newbie here
@morrisrcАй бұрын
Thanks bro 👊
@youraveragehumanbeing806Ай бұрын
May I know the rims you put on the wpl v1 rims?
@morrisrcАй бұрын
After market rims for wpl but that's not good. Look for beadlock wheels. 1.2" or 1.3" beadlock fit for wpl tires.
@youraveragehumanbeing806Ай бұрын
@morrisrc Yes. Luckily, I found some. MN82 doesn't need modification for beadlock wheels, right?
@morrisrcАй бұрын
Yes as long as the wheel hex is 5mm. If you are using beadlock from scx24 or 1:18 trx4m the hex is 7mm so you need an adapter 5mm to 7mm wheel hex.
@youraveragehumanbeing806Ай бұрын
@@morrisrc Okay, thank you very much, sir. This is my first time modifying an RC🥹
@morrisrcАй бұрын
You are welcome, bro
@doel89Ай бұрын
hi , do i need a gyro if i want to play it as a precision driving? like parallel parking etc....
@morrisrcАй бұрын
Yes bro, gyro is essential for drifting.
@prince7p26823 күн бұрын
For drifting
@BilBonRc-AlchemistDubАй бұрын
Hi, really nice vidéo!!!! did you keep the pignon who was on the 280 motor? Sorry, last question, the link for the motor don't work, have you another link for a 370 motor for MN82 please? Thanks in advance 🙂
@morrisrcАй бұрын
Hello bro The conversion kit comes with a pinion gear. Here is the new link and it is much better with 21000rpm. s.shopee.ph/5pmpMBu7KV
@BilBonRc-AlchemistDubАй бұрын
@@morrisrc Many thanks!!!
@fernandosaraiva8449Ай бұрын
Did you use Stock esc? does this mod drain so much more battery?
@morrisrcАй бұрын
Yes bro i am still using stock board with 370 motor but I use 1200mah battery from my mn99s and mn78 and still play more than 20minutes.
@JunKaiWongSPАй бұрын
Very informative video! I might buy my own which will be my second rc from MN Models, my first one was the MN82.
@jgminiaturas8319Ай бұрын
Brasil 🚜👍
@TheFpc20Ай бұрын
What links do you recommend, plastic one like the one you did use in the complete video or metal one? I have a c14 and looking for upgrade the stock links
@morrisrcАй бұрын
Yes, like in the video. The other type in the market is more heavier.
@JunKaiWongSPАй бұрын
Can new servos fix that short steering issue without changing steering arm?
@morrisrcАй бұрын
New servo with digital signal for better response, higher grams for torque. You still need to relocate the steering arm to the outer whole of servo horn.
@alibz7283Ай бұрын
Bro. Compatible to sa stock motor ng mn99s .at stock battery lng ng mn99s. Bago lng ako sa rc.gusto ko matoto mag modified
@morrisrcАй бұрын
Yes bro kaso maselan sa battery yan mabilis humina ang li-ion jan maganda yan sya kung nka lipo batt ka. Kung yan gagamitin mo need mo lng magpalit ng connector ng red jst. Kung may space kpa for esc mas marecommend ko ang 60a surpass hobby ung brown o gold ang heatsink.
@alibz7283Ай бұрын
Salamat sa tips bro☺️
@prince7p268Ай бұрын
Hey bro, please new link for the motor. It's unavailable
@morrisrcАй бұрын
Bro, here is the link and this is much better 21000 rpm. s.shopee.ph/4KxmGDwbSk
@prince7p268Ай бұрын
@@morrisrc thanks
@killerbee10ify2 ай бұрын
Salamat po.. im new to this. Unang upgrade ko to
@morrisrc2 ай бұрын
Welcome bro thank you also
@killerbee10ifyАй бұрын
@@morrisrc kahit stock yung board nya goods po yung 270?
@morrisrcАй бұрын
Yes bro maganda ang bagong board ni mn82 smooth sa kanya ang 370 motor. Pwede ka direct pm sakin sa messenger if ever may mga tanong ka.
@killerbee10ifyАй бұрын
@@morrisrc thankyou po sir !hehehe newbie poko sa hobby na to hahaha kaka sali ko lang din sa fb ng mga groups regarding sa mga rc! Waiting pako sa 370 motor ko nung napanood ko to nag order nako hahaha ..tyaka goods din po ba yung mga portal axels?
@morrisrcАй бұрын
Goods naman ang portal kaso mas wide sya ng 5mm at madagdagan ng 10mm ang clearance ng wheels from fender.
@ylahscorner2 ай бұрын
How to lift mn82... What parts I should buy... Thank you
@morrisrc2 ай бұрын
You can use spacer. Place it between the chassis and the bodyshell.
@ethanthai20782 ай бұрын
What is mn82 stock motor shaft size? Is it 2 mm?
@morrisrc2 ай бұрын
I guess its 2mm or 2.2mm. Same as 370 motor.
@band_siberianhusky2 ай бұрын
I bought the silver shock. because it looked cool. Installing this required quite a bit of work. And I was very disappointed with the silver's performance. I have not tried the black metal shock. My conclusion is that the basic shocks are better than the silver shocks. Overwhelmingly. Of course, there is a possibility that I installed the silver shock incorrectly or purchased a defective product. At least the performance of the basic shock was very good, so I was wondering why I would want to change it. Haha, probably just because of the design. Thank you for this video. :)