Пікірлер
@scottlong-v2q Ай бұрын
Any issue using that gasket with a stock pan as they are not flat like the milodon pan?
@SchoberMotorsports Ай бұрын
@@scottlong-v2q I’d imagine you could use it, but you’ll need to use RTV to seal. Windage tray will not be re-useable I guess is the only down side there.
@captianeddie4554 Ай бұрын
"Where the great ones run" Dead as fried chicken right now, a damn shame.....
@richardmorton1310 Ай бұрын
Memories for sure.
@brandonbarbini7342 Ай бұрын
Love the sound, what was the exhaust setup on it. Pipe size, mufflers, cross over or not etc.
@SchoberMotorsports Ай бұрын
Thank you! Its been so long since I had this setup in the car... I am guessing here. I think I had a set of 3" pipes to dual mufflers that dumped before the rear axle. I believe the mufflers were Thrush welded chambers. No H pipe or anything like that was used.
@DougGarrison-f4q 2 ай бұрын
Awesome
@tbd-1 2 ай бұрын
How many kids looked at the camera that day and though 50 years later the world could be watching them.
@toddbell1748 2 ай бұрын
Does anyone remember the Barforth Chevy?
@EBthere 2 ай бұрын
You've got some legendary "Run Tuff" cars on here. US30 and the 70's were so fun. Thank you!
@Team_BW 3 ай бұрын
One thing you can't experience via video is how incredibly loud the track was. Open exhaust race cars doing a burnout. The smell of high octane fuel, oil, grease, and burnt rubber. Popcorn, beer and cigarettes. Everyone smoked back then - especially car guys
@libertyforever836 3 ай бұрын
Loved the “Chitown Hustler” and the “Vegabond!” This was one of the best tracks in the country. Good old Lake and Porter county in the old days. The region. Millions of memories forever
@nhra7110 3 ай бұрын
so cool! Thanks
@Userqwerty349 4 ай бұрын
I was aware the Chi Town Hustler ran a Mustang II body for a short while, I had never seen video of it before now.
@davem6685 6 ай бұрын
Who doesn’t absolutely love these cars? It’s what hooked me back in the day. So cool.
@williamwallace392 7 ай бұрын
I lived a mile from there. I remember every Sunday morning here in the cars.
@drcracinggarage8047 8 ай бұрын
Not many of us Mopar guys at BMP
@thomasdorsch9711 8 ай бұрын
Thanks for sharing this.
@SchoberMotorsports 8 ай бұрын
More than welcome, happy you enjoyed it! Thank you for subscribing too! Means a lot!
@mikespillman3075 8 ай бұрын
Holy shit.....8mm with actual synced audio.....that coudnt have been cheap.
@SchoberMotorsports 8 ай бұрын
My dad said it was expensive for the time lol glad he spent the $$$ though! Thanks for watching, glad you enjoyed it.
@chrislewis8987 9 ай бұрын
I would like some more info on your rack n pinion setup plz.
@SchoberMotorsports 9 ай бұрын
Sure, what info are you looking for? It is a completely aftermarket front k member from QA1.
@chrislewis8987 9 ай бұрын
What stroke will that oil pan gasket clear?
@chrislewis8987 9 ай бұрын
Ok I see it in the description.
@Torquemonster440 9 ай бұрын
Man, you've really stepped up your program since the old "Whiplash" cam days.. 😅.. Awesome video. 🍻
@SchoberMotorsports 9 ай бұрын
Thanks buddy! Glad you’ve stuck with the channel so long, I really appreciate that!!
@BigfootsnMopars 9 ай бұрын
Yep, had to put one on my R/T, I even use it on my mild 440.
@follkiej 9 ай бұрын
Very cool! I love the use of the smoke machine!
@SchoberMotorsports 9 ай бұрын
Thank you! I thought it was a really cool tool! Read about it online, but never saw it in action.
@follkiej 9 ай бұрын
@@SchoberMotorsports I never even thought about that, let alone it working! Really cool! I never thought the leaks would be that large to show smoke!
@SchoberMotorsports 9 ай бұрын
@@follkiejSame here, I did have signs that it was leaking before but it would be a drip or two in the trailer after a race... but I never saw the pan "actively" dripping when it was running.
@follkiej 9 ай бұрын
@@SchoberMotorsports I work at an accelerator lab where we test joints to the -12 vacuum range. I see now no engine builder needs that! So cool and genius!
@junkyard_D 9 ай бұрын
oh so close! keep on rocking 🤘
@TeamAmbushCreations 9 ай бұрын
Love the videos man! Bracket racing is way more humbling than it has to be😂
@SchoberMotorsports 9 ай бұрын
Thank you sir! Thats the truth, thats just how racing can be sometimes lol...
@G-nl8dj 9 ай бұрын
thank for the extra wop
@SchoberMotorsports 9 ай бұрын
That’s exactly what I said when I got back to the trailer 😂
@earleholt4380 9 ай бұрын
. 0006...brutal 😮
@LightHills 9 ай бұрын
Bro these country boyz shoot better footage and angles than damn shows on TV. I could watch this whole bracket night if they made each race like this
@rjpolitowski6057 9 ай бұрын
Giving it back sucks! Top end racing is brutal. So hard to get good at. Long gone are the days of “dial it down 1 and keep it pegged” now you can basically lose any race at the top end no matter how badly you have em on the tree. Stay in the driver seat bro. Long season ahead.
@SchoberMotorsports 9 ай бұрын
Agreed its tough, I still have a hard time judging the stripe against the dragsters... they are tough to judge, especially the 4.40 and faster ones!
@rjpolitowski6057 9 ай бұрын
@@SchoberMotorsports you got that right my friend. Although you don’t need to be fast to win in bracket racing, going fast does have its advantages
@SchoberMotorsports 9 ай бұрын
@@rjpolitowski6057 Agreed. I’d love to have this car run 5.80s one day, personally I think that’s the best place to be ET wise for a door car
@rjpolitowski6057 9 ай бұрын
@@SchoberMotorsports 5.80s is a real good spot for a door car. Especially a big heavy B-body. But in true racer fashion, 5.80s will turn to 70s, then you’ll be back halfing the car, funny car cage, and the snowball continues 😂😂
@SchoberMotorsports 9 ай бұрын
@@rjpolitowski6057 Hahaha you might have a point there 😂😂
@RandyWeber-q2u 9 ай бұрын
Just one of those days man. Shake it off , regroup and lets get em next time.
@SchoberMotorsports 9 ай бұрын
Yep true that!!!
@McCormicks_Speed_Shop 9 ай бұрын
Did you have to set the bypass at the pump? Does that ever come in to play with the fuel pressure regulator set around 7? Haven’t been able to find much on that in my digging, just curious
@SchoberMotorsports 9 ай бұрын
I did not need to mess with the bypass at all. I installed all the lines and then set fuel pressure via regulator and that was it.
@jcnewbee8124 9 ай бұрын
woulda coulda shoulda...lol.
@rjpolitowski6057 9 ай бұрын
Wow is that car beautiful and the attention to detail is amazing. I missed what you welded on the valve cover. Was there a vacuum leak that caused the vacuum pump to start pulling a bunch of oil?
@SchoberMotorsports 9 ай бұрын
Thank you, I appreciate the kind words! I originally had the vacuum relief valve on the valve cover, I removed that and welded up that hole. I moved the vac relief valve to the inlet side of the vac pump.
@moparnut6286 9 ай бұрын
😎👍
@phillipthethird42 9 ай бұрын
This is a sport where you win at the starting line. Not the finish line.
@phillipthethird42 9 ай бұрын
I always love a close race. And seeing the numbers afterwords. That one was close.
@dhruv3341 9 ай бұрын
Yooo thats awesome! Its great you guys arent drag racing on the street too.
@SchoberMotorsports 9 ай бұрын
Thank you!! Yaaa I like to stay on the track, streets are too sketchy for me lol
@TeamAmbushCreations 8 ай бұрын
Definitely digging the fast and the furious song in the background!
@anthonyscott3659 9 ай бұрын
Are these pumps just always loud ? Bought a car with a magna 500 and it's as loud as the exhaust almost lol
@SchoberMotorsports 9 ай бұрын
In my experience, every aftermarket pump that I've used has always been really loud, but I've only used this pump and the Holley Blue pump.
@BigfootsnMopars 10 ай бұрын
Beautiful Car Sir✨❤️🦶🏾
@Poet640 10 ай бұрын
Went there in 1975 for my 11th birthday, was the national wheelie championship. Moved to Pennsylvania that summer and when I moved back to Chicago Heights, Illinois in 1982 the track was closed.
@rjpolitowski6057 10 ай бұрын
Funny thing is, I remember watching this video when you posted it. I know the girl you raced in that truck. Guy who builds my engines built her SBC when she was dating his son. She’s a good racer. When you laid this on her I was pumped. Always great watching a Mopar put a Chevy on the trailer lol
@anton26s 10 ай бұрын
Don’t ever stop brother💯
@SchoberMotorsports 10 ай бұрын
Thank you 🥹
@earleholt4380 10 ай бұрын
Hope you split
@christopherbice862 10 ай бұрын
I wish youtube had a 2 thumbs up option😁👍👍
@MykeHunts 10 ай бұрын
Pops pedaled it right before the finish. He gave you the win
@callmeblue3730 10 ай бұрын
Gotta love drag racing
@andrewduringer8836 10 ай бұрын
Get after dude high jack that rig for the 2024 season! I'm a door car man at heart but man dragster are fun!
@shanehumphrey4827 10 ай бұрын
I built one of these in 1980. THE ROBSON SHAKER. IT RAN 10:10 &130
@BigfootsnMopars 10 ай бұрын
Love your videos 🦶🏾
@Blusmbl 10 ай бұрын
I lol’d at Arms of an Angel!
@SchoberMotorsports 10 ай бұрын
Haha glad you liked that 😂😂
@follkiej 10 ай бұрын
Excellent job! Great race and incredible job on the video! Love the stats and Scoreboard! Thank you! {Hi John)